• Journal of Mechanical Science and Technology
• /
• v.19 no.3
• /
• pp.792-801
• /
• 2005

This paper discusses a dc motor equipped electric power steering (EPS) system and demonstrates its advantages over a typical hydraulic power steering (HPS) system. The tire-road interaction torque at the steering tires is calculated using the 2 d.o.f. bicycle model, in other words by using a single-track model, which was verified with the J-turn test of a real vehicle. Because the detail parameters of a steering system are not easily acquired, a simple system is modeled here. In previous EPS systems, the assisting torque for the measured driving torque is developed as a boost curve similar to that of the HPS system. To improve steering stiffness and return-ability of the steering system, a third-order polynomial as a torque map is introduced and modified within the preferred driving torques researched by Bertollini. Using the torque map modification sufficiently improves the EPS system.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.3
• /
• pp.284-289
• /
• 2006

In 2003, Korean government made the 11 scopes of overburdened work[Ministry of Labor(MOL), Notification No. 2003-24] to prevent musculoskeletal disorders(MSDs). MOL Notification was established based on 'Washington Administrative Code 296-62-051, Ergonomics'. When initially investigating the contents, the labor unions and the specialists pointed out the possibility of devaluation on risk factors of MSDs. The present study aimed to compare the result of the NIOSH revised lifting equation(NLE) analysis with the MOL Notification(No.8, 9, 10) on manual lifting tasks. A study sample of 568 manual lifting tasks (automobile parts, foods, and tire manufacture) were evaluated for this study. All 502 tasks exceed lifting index(LI) of 1.0, but 276 tasks(55.0%) out of 502 tasks were evaluated non-over burdened work for musculoskeletal system by the MOL Notification. Particularly, 47 tasks(30.9%), in spite of exceeding LI of 3.0, were evaluated non-over burdened work. This study has shown the possibility of devaluation on risk factors of MSDs, when evaluated by MOL Notification. Therefore, it will be necessary to repeal or complement the scope of over-burdened work(MOL Notification) to prevent musculoskeletal disorders.

• Journal of Veterinary Clinics
• /
• v.22 no.2
• /
• pp.100-107
• /
• 2005

This study was carried out to investigate the physical and chemical properties of teat cup liners. The hardness of the liners was $50\~67$, and their fatigue to failure 38-1,185 cycles. The elongation and tensile strength of these liners were about $134 kgf/cm^2\;and\;473\%$, respectively. The infrared spectrum and the gas chromatogram revealed that the liner A was consisted of NR, SBR, and BR, with a composition ratio of 60:20:20 (part per hundred rubber). The raw rubber materials used for liners B to G, on the other hand, were NBR only. However, the liner H was made of silicon rubber. The thermogravimetric analysis showed that the liners tested in this study contained raw rubber material, carbon black, organic compounds and metallic compounds.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.253-259
• /
• 2004

The Jeju Island in Korea is the clean area which the tradition culture is preserved locally well with the nature environment of Heaven's blessing. An air pollution is becoming recently serious problem as the industrial development is proceeded with the urbanization. This study investigates that the atmosphere environment at Jeju area influences on the metal corrosion. A study of the atmosphere corrosion for carbon steel, copper, zinc ana aluminium exposed on five test sites indoors and outdoors. Corrosion results are treated statistically and adjusted to a model previously proposed for carbon steel, copper, zinc and aluminium based on the influence of environmental parameters and main pollutants($SO_2$ and chlorides) on tire atmosphere corrosion of metals. Through this study, we try to set the standards atmosphere corrosion at Jeju Island.

• IE interfaces
• /
• v.24 no.1
• /
• pp.78-86
• /
• 2011

To mitigate space restriction and to raise productivity, some shipbuilding companies use floating-docks on the sea instead of dry-docks on the land. In that case, a floating-crane that can lift very heavy objects (up to 3,600 tons) is used to handle the blocks which are the basic units in shipbuilding processes, and so, very large blocks (these are called the mega-blocks) can be used to build a ship. But, because these mega-blocks can be made only in the area near the floating-dock and beside the sea, the space is very important resource for the process. Therefore, our problem is to make an efficient spatial schedule for the mega-block assembly yard. First of all, we formulate this situation into a mathematical model and find optimal solution for a small problem using a commercial optimization software. But, the software could not give optimal solutions for practical sized problems in a reasonable time, and so we propose a GA-based heuristic algorithm. Through a numerical experiment, finally, we show that the spatial scheduling algorithm can provide a very good performance.

• International Journal of Advanced Culture Technology
• /
• v.11 no.2
• /
• pp.330-344
• /
• 2023

This research report cuts across management sciences (market strategy entry mode development) and innovative technology (Electric Vehicle (EV)) alongside measures to submerge global warming. The development of a successful entry mode for the electric Vehicle into the African continent is the main objective of the study. The study focuses on an analysis of how electric car manufacturers can enter the African market in other to achieve global sustainability and social responsibility. The methodology is based on identifying the factors that affect the choice of an entry mode into international markets by multinational companies desiring to leverage their revenue through a foreign market. It also offered a quantitative approach that can support the economic and sustainability entry mode model for EVs and a qualitative approach of Porter's five forces analysis as an entry mode coaching tool for EVs. These proxies are used in quite a wide range of multivariate statistical methods (trend analysis, ratio, and probability, comparative t-test technique, auto-regression, and ordinary least square technique). The result acknowledges joint venture and setting of the plant (physical presents) as the optimal entry mode in African EV market. It requires the EV manufacturers a tire-free emission innovation technology in order to optimize the global sustainability initiative.

• Computers and Concrete
• /
• v.32 no.2
• /
• pp.173-184
• /
• 2023

In this study, mechanical, flexural post-cracking, and torsional behaviors of recycled steel fiber-reinforced concrete (RSFRC) incorporating steel fibers obtained from recycling of waste tires were investigated. Initially, three concrete mixes with different fiber contents (0, 40, and 80 kg/m³) were designed and tested in fresh and hardened states. Subsequently, the flexural post-cracking behaviors of RSFRCs were assessed by conducting three-point bending tests on notched beams. It was observed that recycled steel fibers improve the post-cracking flexural behavior in terms of energy absorption, ductility, and residual flexural strength. What's more, torsional behaviors of four RSFRC concrete beams with varying reinforcement configurations were investigated. The results indicated that RSFRCs exhibited an improved post-elastic torsional behaviors, both in terms of the torsional capacity and ductility of the beams. Additionally, numerical analyses were performed to capture the behaviors of RSFRCs in flexure and torsion. At first, inverse analyses were carried out on the results of the three-point bending tests to determine the tensile functions of RSFRC specimens. Additionally, the applicability of the obtained RSFRC tensile functions was verified by comparing the results of the conducted experiments to their numerical counterparts. Finally, it is noteworthy that, despite the scatter (i.e., non-uniqueness) in the aspect ratio of recycled steel fiber (as opposed to industrial steel fiber), their inclusion contributed to the improvement of post-cracking flexural and torsional capacities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2846-2851
• /
• 2012

Effects of ground tire rubber(GTR) and unexpanded $Expancel^{(R)}$ powders on the thermal conducting characteristics of rigid polyurethane foams(PUFs) were studied. Sub-micron sized GTR powders and $Expancel^{(R)}$ powders were used as the foam nucleating agents to improve the thermal insulating properties of the rigid PUFs. As the results, while the thermal conductivities of the GTR filled-PUF samples were increased linearly with GTR contents, those of $Expancel^{(R)}$ filled-PUF samples were decreased a little bit. It was considered from the results that GTR powders might predominantly play a role as the extending fillers. On the other hand, $Expancel^{(R)}$ powders could act as the foam nucleating agents based on the polar surface, showing smaller cell sized PUF with improved insulating characteristics.

• Journal of Nutrition and Health
• /
• v.24 no.4
• /
• pp.344-349
• /
• 1991

This study was undertaken to evaluate the potassium consumption and excretion in forty healthy male workers of a tire company in Seoul. Mean postassium intake for three days in the subject was $54.5\pm16.7mEq/day(2.13\pm0.64g)$ and urinary excretion of potassium in 24 hours was $45.9\pm10.5mEq(1.77\pm0.41g)$. Thus 83% of dietary potassium was excreted in the form of urine. Dietary ratio of Na to K was $4.15\pm0.58$ while urinary ratio of Na to K was $5.20\pm1.11$. The main food source of potassium was cooked rice with soybean in the rice group, potato with soybean paste soup in the part of soup group. and seasoned Spanish mackerel with raddish in the side dish group. There was a strong correlation between dietary protein and dietary potassium(r=0.694, p<0.001). Urinary sodium and potassium were also strongly associated with each other(r=0.647, p<0.001).

• Journal of Environmental Science International
• /
• v.18 no.10
• /
• pp.1103-1114
• /
• 2009

In this study, the environmental behavior of malodor pollutants (MPs: $H_2S$, $CH_3SH$, DMS, and DMDS) was investigated around areas influenced by strong anthropogenic processes based on observations and modeling study (a CALPUFF dispersion model). The MP emission concentrations were measured from 8 industrial source regions (tire plants (S1-S3), waste water disposal plant (S4), and oil refinery (S5) in an urban center area and paper mill/incineration plant (S6) and livestock feedlots (S7-S8) in Ungsang area) in Yangsan city during a fall period in 2008 (21 October 2008). Overall, the most MPs emitted from the urban center area were found to affect the malodor pollution in their downwind areas during early morning (06:00 LST) and nighttime (18:00 and 21:00 LST), compared with those in the Ungsang area. For malodor intensity, the most MPs in the urban center area (especially S1 and S2) were found to be a significant contributor, whereas $CH_3SH$ and $H_2S$ in the Ungsnag area (especially S6) were the dominant contributor. The model study showed agreement in the spatial distributions of simulated MPs with those of the observations. The largest impact of MPs in the urban center area on the malodor pollution in its residential areas occurred at S1, S2, and S3 sites during nighttime, while that of MPs in the Ungsang area occurred at S6 and S8 sites. This may be caused mainly by the high MP emissions and in part by wind conditions (prevailing northeasterly winds with low wind speeds of 2-3 m/s).