DOI QR코드

DOI QR Code

Effects of GTR and Unexpanded Expancel Powders on Thermal Conducting Characteristics of Rigid Polyurethane Foams

GTR 및 미발포 Expancel이 경질우레탄폼의 열전도특성에 미치는 영향

  • Ahn, Won-Sool (Department of Chemical Engineering, Keimyung University)
  • 안원술 (계명대학교 화학공학과)
  • Received : 2012.05.02
  • Accepted : 2012.06.07
  • Published : 2012.06.30

Abstract

Effects of ground tire rubber(GTR) and unexpanded $Expancel^{(R)}$ powders on the thermal conducting characteristics of rigid polyurethane foams(PUFs) were studied. Sub-micron sized GTR powders and $Expancel^{(R)}$ powders were used as the foam nucleating agents to improve the thermal insulating properties of the rigid PUFs. As the results, while the thermal conductivities of the GTR filled-PUF samples were increased linearly with GTR contents, those of $Expancel^{(R)}$ filled-PUF samples were decreased a little bit. It was considered from the results that GTR powders might predominantly play a role as the extending fillers. On the other hand, $Expancel^{(R)}$ powders could act as the foam nucleating agents based on the polar surface, showing smaller cell sized PUF with improved insulating characteristics.

미세하게 분쇄된 폐타이어 분말(GTR)과 미발포 $Expancel^{(R)}$ 분말이 경질 폴리우레탄 발포체(PUF)의 열전도 특성에 미치는 영향을 연구하였다. 마이크론 크기로 분쇄된 GTR과 $100^{\circ}C$ 이상의 온도 영역에서 약 40배 부피로 팽창 가능한 $Expancel^{(R)}$ 미세분말을 사용하였고 이들이 경질 PUF 생성 시의 발포 기핵제 역할에 의한 기포크기 감소효과 및 이로 인한 PUF의 열전도특성 개선 효과를 집중적으로 살펴보았다. 연구의 결과로서, GTR이 충전된 PUF 샘플들의 열전도도는 GTR 함량이 증가함에 따라 선형적으로 증가하는 현상을 나타내는 반면, $Expancel^{(R)}$이 도입된 샘플들은 농도에 따라 약간 감소하는 특성을 보여 주었다. 이러한 결과로부터 GTR은 PUF 생성에서 증량제의 역할이 상대적으로 우세하여 단열 특성에 기여하지 못하는 반면, $Expancel^{(R)}$은 분말의 표면극성으로 인한 발포 기핵 작용에 의하여 셀 크기를 감소시킴으로서 단열효과에 기여할 수 있는 것으로 생각되었다.

Keywords

References

  1. G. Oertel, editor, "Polyurethane Handbook", 2nd ed, Hanser Publishers, New York, 1993.
  2. M. Szycher, "Szycher's Handbook of Polyurethanes", CRC Press, New York, 1999.
  3. D. Randall and S. Lee, editors, "The polyurethanes book", John Wiley & Sons, Ltd., New York, 2002.
  4. K. Yoshida, "Polyurethane and Related Foams", CRC Press, FL, 2007.
  5. U. Henri, "Chemistry and Technology of Isocyanate", John Wiley & Sons, New York, 1996.
  6. J. Grimminger and K. Muha, "Silicone Surfactants for Pentane Blown Rigid Foam", Journal of Cellular Plastics, 31(1), pp. 48-72, 1995. https://doi.org/10.1177/0021955X9503100104
  7. J. Grimminger, "New Additive Solutions for Rigid Polyurethane and Polyisocyanurate. Lamination Foams", Proceedings of the 1999 RAPRA Catalysts and Surfactants in Polyurethane Foams Conference, 18(3), pp. 175-195, 1999.
  8. S. N. Singh, "Blowing Agents for Polyurethane Foams", ChemTec Publishing, Toronto, 2002.
  9. USP 4,795,763, 1989.
  10. USP 6,046,247, 2000.
  11. http://www.engineeringtoolbox.com/thermal-conductivity-d_429.html
  12. S.-C. Moon, J.-K. Choi, and B. Jo, "Foaming properties and Flame Retardancy of the Foam Based on NBR/GTR Compounds", Elastomer, 37(3), pp. 159-169, 2002.
  13. S.-C. Moon, J. Lee, J.-K. Choi, and B. Jo, "Foaming properties and Flame Retardancy of the Foam Based on NBR/GTR Compounds", Elastomer, 38(3), pp. 251-261, 2003.
  14. J. A. Thoen, "Rigid Cellular Plastics in Reaction Polymers" W. F. Gum, W. Riese, H. Ulrich, Eds., Hanser, Munich, 1992.