• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.438-441
• /
• 2002

Today, it is concentrating on automation and these appearance of industrial robot has been dealing flexibly with this field. If it is drilling through these industrial robot, it will be a high efficiency of the productivity. Therefore, electric drill is setting on articulated robot with six degree of freedom and the 5 face is drilling as the type of articulated robot by a machine object setting. This study was carried out to get the possibility about drilling as analyzing with experimental frequency, original vibration of robot and appearance of vibration when it is practical drilling.

• Journal of Industrial Technology
• /
• v.22 no.B
• /
• pp.251-260
• /
• 2002

In this thesis, a three degrees of freedom robot, which is able to provide sufficient precision for various robot researches, has been developed. The cable mechanism is used as a basic transmission of robot joints. Based on an optimal design strategy, link and joint parameters are determined and then overall geometry of the robot is designed. As an architecture of robot control, real time control system using real time linux and RtiC-Lab(Real Time Controls Laboratory) is developed. This system, written in C and based on Linux O/S, includes text editor, compiler, downloader, and real time plotter running in host computer for developing control purpose. Using these hardware and software, simple PD position control is implemented, the results shows the effectiveness of the system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.4
• /
• pp.406-410
• /
• 2008

This paper presents a new robot calibration algorithm with joint stiffness parameters for the enhanced positioning accuracy of industrial robot manipulators. This work is towards on-going development of an industrial robot calibration software which is able to identify both the kinematic and non-kinematic robot parameters. In this paper, the conventional kinematic calibration and its important considerations are briefly described first. Then, a new robot calibration algorithm which simultaneously identifies both the kinematic and joint stiffness parameters is presented and explained through a computer simulation with a 2 DOF manipulator. Finally, the developed algorithm is implemented to Hyundai HX165 robot and its resulting improvement of the positioning accuracy is addressed.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.244-248
• /
• 1996

Nowadays, most shop floors using industrial robots have many problems such as constructing robot workcell, generating robot arm moving trajectory, etc.. In the case of programming robot-arms for a specific task, shop operator commonly use the teach pendant to record the target position and determine the moving trajectory. However, such a teaching process may result in an inefficient trajectory in the sense of moving distance and joint angle fluctuation. Moreover, shop operators who have little knowledge about robot programming process need a lot of learning time and cost. The purpose of this paper is to propose a user friendly robot programming method to program robot-arms easily and efficiently for shop operator so that the programming time is reduced and a short and stable trajectory is obtained.

• Journal of Industrial Technology
• /
• v.20 no.B
• /
• pp.195-200
• /
• 2000

This paper describes the path planning method in an unknown environment for an autonomous mobile robot equipped with CCD(Charge-Coupled Device) camera. The mobile robot moves along the guideline. The CCD camera is used for the detection of the existence of a guideline. The wavelet transform is used to find the edge of guideline. It is possible for us to do image processing more easily and rapidly by using wavelet transform. We make a fuzzy control rule using image data as an input then determined the position and the navigation of the mobile robot. The center value of guideline is the input of fuzzy logic controller and the steering angle of the mobile robot is the fuzzy controller output. Some actual experiments show that the mobile robot effectively moves to target position by means of the applied fuzzy control.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.5 no.3
• /
• pp.246-252
• /
• 2005

Intelligent Space is a space where many sensors and intelligent devices are distributed. Mobile robots exist in this space as physical agents, which provide human with services. To realize this, human and mobile robots have to approach each other as much as possible. Moreover, it is necessary for them to perform interactions naturally. It is desirable for a mobile robot to carry out human affinitive movement. In this research, a mobile robot is controlled by the Intelligent Space through its resources. The mobile robot is controlled to follow walking human as stably and precisely as possible. In order to follow a human, control law is derived from the assumption that a human and a mobile robot are connected with a virtual spring model. Input velocity to a mobile robot is generated on the basis of the elastic force from the virtual spring in this model. And its performance is verified by the computer simulation and the experiment.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2001.10a
• /
• pp.8.2-8
• /
• 2001

• Journal of Industrial Convergence
• /
• v.15 no.1
• /
• pp.43-52
• /
• 2017

Robot refers to machines that recognize the external environment and assess the given situations in order to operate autonomously by imitating the manner in which humans behave. Although Korea still lacks global competitiveness, Korea, as the $4^{th}$ ranked robot manufacturing country in the world, is currently expanding the domains of robots from application in manufacturing to application in service provision. Accordingly, this study aims to analyze the factors for the success in entry into the cooperation robot market among various robotic markets in accordance with the literary research method in consideration for the importance of robot industry that could determine the future national competitiveness. The result of the analysis of the factors for the success in entry into the cooperation robot market, shows that factors including analysis of the trends in manufacturing robot market, strategy for benchmarking of the leading cooperation robot companies, activation of small and medium enterprise-centered cooperation robotic industry, excavation of demands for cooperation robots with focus on automobile, semiconductor and IT industries, utilization of the opportunities provided by government's robotic industry policies and standardization of cooperation robot components, etc. determine whether one will succeed in the market or not. Furthermore, it is believed that fortification of competitiveness of the manufacturing sector through the powerful policy support for the robotic industry at government level and policies on cultivation of new growth engine through specialization of the robotic areas closely related to daily life must be implemented concurrently because it is forecasted that competitiveness in robotics technology will become the criterion for national competitiveness in the future.

• The Journal of Korea Robotics Society
• /
• v.2 no.3
• /
• pp.282-287
• /
• 2007

Humanoid and android robots are emerging as a trend shifts from industrial robot to personal robot. So human-robot interaction will increase. Ultimate objective of humanoid and android would be a robot like a human. In this aspect, implementation of robot's facial expression is necessary in making a human-like robot. This paper proposes a dynamic emotion model for a mascot-type robot to display similar facial and more recognizable expressions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.371-372
• /
• 2013