• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.32
• /
• pp.95-103
• /
• 1994

This paper is to appraise the effect of factory noise to work performance and quality. Stamp printing, which are decomposed into work element is used to compare with work performance according to the change of noise, and quality is studied to analyse the effect of product. The noise in experiment is the noise of rotary press, and is used a variety of change.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.474-477
• /
• 2002

Hearing loss caused by exposure to industrial machine noise results in devastating disability that is mostly preventable. And recent researches indicate that the noise may also induce hypertension and cardiovascular disease. In addition the sleep polygraph provides many indicators of sleep disturbance by the noise. In this paper we make an analysis on ball bearing machine noise, a kind of the industrial noise. The analysis of Its power spectrum is based on FFT(Fast Fourier Transform). And then the spectral results of the noise are compared with that of the spectrum for an auditory signal. The signal is measured from the pronunciation of two Koreans. Finally we suggest the most important stratagem to prevent the noise for worker's health and efficiency.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.266-270
• /
• 2006

Noise reduction the noise of a high precision multi-stage gearbox applied at the industrial robot is investigated by experiment such as the modal test and the signal analysis. The signal analysis performed with the waterfall plot representing the power spectrum as a function of the rotating speed. An eccentric load is installed at the gearbox in order to organize similar condition used in the industrial robot. Exciting sources are found out by the waterfall plot, and then the main factor to make the noise is distinguish. For the low-noise gearbox, the gear design parameter is modified and this gearbox is experimented in the same procedure. The results of the test show the noise level of gearbox reduced.

• Journal of Environmental Impact Assessment
• /
• v.18 no.2
• /
• pp.89-97
• /
• 2009

Korean society is faced with various new problems arising from the development projects of new towns, industrial cities, large-scale residential complexes, etc. started from the 1970s. Particularly with the construction of residential and industrial complexes by the roadsides, they are openly exposed to road traffic noise and vibration. Thus, the objective of this study is to examine using noise maps how increasing traffic volume affects road traffic noise and what problems it causes in areas where new towns or complexes are constructed by development projects. According to the results of this study, in areas around the sites of development projects, the noise level increased by road traffic noise compared to that before development and was 1.16~6.92 times higher than the environmental noise standard, but measures to reduce road traffic noise was lukewarm. In addition, areas with soundproof facilities showed a noise level 1~3 step lower than other areas, and in individual buildings, the noise level on the side facing the road was 1~2 step higher than that on the rear side.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.2
• /
• pp.193-199
• /
• 1995

This study was designed to investigate the difference of time weighted average(TWA) of noise levels and noise doses by the different operating parameter settings such as exchange rate, threshold level and criterion level for noise dosimeter in the field measurements of noise at industrial working environments. The time weighted averages of noise level and noise doses for noise working environments were determined by noise dosimeter on 80 workers employed at 20 industrial establishments of 8 industries. The results obtained were as follows: 1. The mean time weighted average(TWA) of the noise working environments by the operating parameter settings showed 93.4 dB(A) in 3 dB of exchange rate, 80 dB of threshold level and 90dB of criterion level 92.0 dB(A) in 3 dB-exchange rate, 90 dB-threshold level and 90 dB-criterion level, in 90.8 dB(A) in 5 dB of exchange rate, 80 dB of threshold level and 90 dB of criterion level, and 86.7 dB(A) in 5 dB of exchange rate, 90 dB of threshold level and 90dB of criterion level. 2. ln group of noise level less than 90 dB(A), mean TWAs of 80 dB of threshold level were significantly higher than that of 90 dB of threshold level in 3 dB and 5 dB of exchange rate. 3. The case exceeded threshold limit value of noise was 49(61.3 %) in 3dB, 80dB and 90 dB setting, 44(55.0 %) in 3 dB, 90 dB, 90 dB setting, 33(41.3 %) in 5 dB, 80dB, 90 dB setting and 26(32.5%) in 5 dB, 90 dB, 90 dB setting. Above considerations in mind, it is suggested that exchange rate and threshold level be specified in related laws and regulations in the evaluation of working environments noise.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.1
• /
• pp.49-55
• /
• 2015

This paper proposes a 2.4 GHz RF oscillator with a very low close-in phase noise performance. This is composed of a low frequency crystal oscillator and three frequency multipliers such as two doubler (X2) and one tripler (X3). The proposed oscillator is implemented as a hybrid type circuit design using a discrete silicon bipolar transistor. The measurement results of the proposed oscillator structure show -115 dBc/Hz close-in phase noise at 10 kHz offset frequency, while only dissipating 5 mW from a 1-V supply. Its close-in phase noise level is very close to that of a low frequency crystal oscillator with little degradation of noise performance. The proposed structure which is consisted of a low frequency crystal oscillator and a frequency multiplier provides new method to implement a low power low close-in phase noise RF local oscillator.

• Journal of KSNVE
• /
• v.13 no.2
• /
• pp.119-128
• /
• 2003

Abstract Increasing awareness of industrial noise pollution and emerging stricter standards have made noise an important topic of research in electric motors. The standard three-phase induction motors. see Fig. 1, (abbreviated further as TPIM) are mass-produced as being simple, robust and rather inexpensive, as opposed to other types of electric motors. Electric motors use over half of all electricity consumed in most countries. Typically motors consume 60∼80 ％ of the electricity for those used In the industrial sector and about 20∼35 ％ of the electricity for those used in the commercial sector. For that is important to know their participation to the noise pollution of the environment and the efficient ways of their noise reduction. Each step in determining the ways for TPIM electromagnetic noise reduction including the methods that highlight their efficiency, are presented and explained.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.66-70
• /
• 2005

Noise prediction are required as part of an environmental impact assessment. Prediction method that is used to domestic environmental impact assessment of construction site and industrial site is not applied work operation rate, work position, moving noise source, inner traffic flow, work type and height of noise source etc. The BS5228 methodology is used mainly for assessment of proposed open industrial sites(mineral extraction, landfill etc.), and larger long-term construction sites(typically for major infrastructure projects). also, estimation which consider various effect factor is possible.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.1
• /
• pp.121-128
• /
• 2010

The purpose of this study is to confirm the impact of noise on subject accomplishment as well as physical/mental load, and evaluates the effects of noise-masking and earplug. 15 college students participate in the test, and the comparison is performed by executing four projects according to conditional categories of noise environments; control condition, noise condition, earplug condition, and noise-masking condition. Noise in the field site of the H manufacturer was used as the noise source, the general job aptitude test which consist of linguistic ability, math ability, perception ability, reasoning ability was used as the task of this project. To estimate physical/mental load evaluation, we used the heart rate R-R interval, Criteria flicker fusion frequency(CFF) and measured NASA-TLX workload for subjective evaluation. As the research outcome, it is shown that there is a meaningful difference for the project task score, dropping rate of CFF, the heart rate, and NASA-TLX subjective evaluation score according to conditions of noise environment. Therefore, the impact of noise on capability of subject accomplishment as well as physical/mental load was confirmed along with the effects of using earplug and noise-masking.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.12
• /
• pp.1147-1152
• /
• 2010

The wet brakes used in an industrial forklift often produce noise on braking. Elimination or reduction of this squeal noise is an important task for the improvement of comforts. In this paper, a test rig was developed which was possible for testing of brake noise and an experimental measurement on squeal noise was performed. The causes of the brake noise are identified by experimenting how the factors such as automatic transmission fluid, the groove of friction-plate pad and the material of friction-plate pad affect the squeal noise. In order to identify the squeal characteristics, the signal analyses for noise are performed by using frequency spectrums. Experimental results showed that the viscosity of automatic transmission fluid and the groove pattern of friction-plate pad largely affect the reduction of the wet brake squeal noise in an industrial forklift.