• 한국해양학회지
• /
• v.18 no.1
• /
• pp.29-42
• /
• 1983

This stidy was intended to investigate the heavy metal contents in the bottom sediments of the continental shelt around the Jeju Island and ot the southern coastal area of the Korean Peninsula. For this study 39 bottom sedinent samples were taken from the study area using Phleger gramity corer and Snapper. The average contents of heavy metals were 59.1 ppm Zn, 362.6 ppm Mn, 63.8 ppm Cr, 15.7 ppm Pb, 10.0 ppm Co, 28.9 ppm Ni, 10.5 ppm Cu, and 2.7% Fe in the surficial sediments around the Jejr Island; and 79.ppm Zn, 384 ppm Mn, 8.6 ppm Pb, 17.8 ppm Ni, 23.2 ppm Cu, and 1.59 % fe in those of nearsgore of the southern coastal area respectively. The heavy metal contents were higher in the northwestern part around the Jeju Island compared to those in other region. However, these tendencies were not the result of pollution, but of the differences of grain size of the sedimenrs. In the nearshore of the southern coast, the heavy metal contents did not show any geographical tendency. However, those of Masan and Jinhae Bays wew higher than those of the other region. These seemed to be caused by waste disposal from the industrial compsex located at the adjacent land. Nevertheless these values of heavy metal content except for Zn and Cu in Masan Bay and inner bay of Jinhae are lower than the average values of the each world-wide data of the nearshore sedimentl. The pair correlations of the cach heavy metal elements were calculated by regressino analysis using VAX 780 computer. the following pair elements, such as Zn-Cu, Ni-Cu, Fe-cu, Cr-Cu, Co-Zn, Ni-Zn, Cr-Zn, Ni-Co, Fe-Co, Cr-Co, Fe-Ni, Cr-Ni and Cr-Fe show closely posetive linear correlations in the sediments around the Jeju Island. In general, the heavy metal content increases in proportion to the increase of the mean values of the grain size of the sediments around the Jeju Island. In the southern coastal area, in gineral, thepair correlations of each heavy metal elements did not southern coastal area, in general, the pair correlatttttions of rach heavy metal elements did not show any positive correlation except for the positive linear correlations of Cu-Zn, Cu-ni and Ni-Mn. It is interpreted as a result of the differences of the physecochemical environment of the sampling sites and also of the influences of the ondustrial wastes from the manufacturing factores located at the coastal zone of the study area.

• KDI Journal of Economic Policy
• /
• v.12 no.2
• /
• pp.51-79
• /
• 1990

Research on technical efficiency, an important dimension of market performance, had received little attention until recently by most industrial organization empiricists, the reason being that traditional microeconomic theory simply assumed away any form of inefficiency in production. Recently, however, an increasing number of research efforts have been conducted to answer questions such as: To what extent do technical ineffciencies exist in the production activities of firms and plants? What are the factors accounting for the level of inefficiency found and those explaining the interindustry difference in technical inefficiency? Are there any significant international differences in the levels of technical efficiency and, if so, how can we reconcile these results with the observed pattern of international trade, etc? As the first in a series of studies on the technical efficiency of Korea's manufacturing industries, this paper attempts to answer some of these questions. Since the estimation of technical efficiency requires the use of plant-level data for each of the five-digit KSIC industries available from the Census of Manufactures, one may consture the findings of this paper as empirical evidence of technical efficiency in Korea's manufacturing industries at the most disaggregated level. We start by clarifying the relationship among the various concepts of efficiency-allocative effciency, factor-price efficiency, technical efficiency, Leibenstein's X-efficiency, and scale efficiency. It then becomes clear that unless certain ceteris paribus assumptions are satisfied, our estimates of technical inefficiency are in fact related to factor price inefficiency as well. The empirical model employed is, what is called, a stochastic frontier production function which divides the stochastic term into two different components-one with a symmetric distribution for pure white noise and the other for technical inefficiency with an asymmetric distribution. A translog production function is assumed for the functional relationship between inputs and output, and was estimated by the corrected ordinary least squares method. The second and third sample moments of the regression residuals are then used to yield estimates of four different types of measures for technical (in) efficiency. The entire range of manufacturing industries can be divided into two groups, depending on whether or not the distribution of estimated regression residuals allows a successful estimation of technical efficiency. The regression equation employing value added as the dependent variable gives a greater number of "successful" industries than the one using gross output. The correlation among estimates of the different measures of efficiency appears to be high, while the estimates of efficiency based on different regression equations seem almost uncorrelated. Thus, in the subsequent analysis of the determinants of interindustry variations in technical efficiency, the choice of the regression equation in the previous stage will affect the outcome significantly.

• Journal of Society of Preventive Korean Medicine
• /
• v.5 no.1
• /
• pp.41-56
• /
• 2001

Overview: The purpose of this study was to evaluate the determinants on the correlation between constitution and health promoting lifestyle profile on the workers. Also, the questionnaire on the HPLP (health promoting lifestyle profile) of Walker(1987) and Sa-sang constitution of Lee(l894) were utilized Methods: Data from a representative sample of 652 workers were analyzed Pearson's chi-square test analysis was utilized to test the explanatory causal model and to determine the direct and indirect effects of independent variables on quality of life. Results: Constitutional distribution among exposed group, were Tae-eum In(43.7%), So-eum In(33.6%), and So-yang In(22.7%). The degree of the subjects practicing health promoting lifestyle, on a scale of 1 to 4, is an average of 2.62, personal relations 2.94, self-realization 2.86, stress management 2.71, nutrition 2.68, responsibility for health 2.37, and exercise 2.21, with personal relations earning the highest points and exercise the lowest As for factors influencing health promoting lifestyle, there is significant difference between sex and age. That is female and higher age. On the difference between constitution and health promoting lifestyle, Tae-eum In is the highest all area except personal relations. So-eum In is the lowest all area except responsibility for health. Conclusions: Tae-eum In totally do health promoting lifestyle well but So-eum In relatively not. On the Study we used the HPLP(health promoting lifestyle profile) on the premise that each person's daily life, the attitude and the practice level to the health have an influence on the health. So in the constitution there is a little differences in the consideration and the practice level and health condition will be different. On this study we finish up by knowing about the health promoting lifestyle. But on next time we will have to go on studying about the sign and the comparison with the result of western and oriental medical health examination to the each constitution on carrying out continuously oriental medical health examination.

• Korea Science and Art Forum
• /
• v.37 no.5
• /
• pp.119-133
• /
• 2019

This study is as skyscrapers are becoming increasingly taller, more constructors have decided the height alone cannot be a sufficient differentiator. As a result, atypical architecture is emerging as a new competitive factor. Also, it can be used for symbolizing the economic competitiveness of a country, city, or business through its form. Before the introduction of digital media, there was a discrepancy between the structure and form of a building and correcting this discrepancy required a separate structural medium. Since the late 1980s, however, digitally-based atypical form development began to be used experimentally, and, until the 2000s, it was used mostly for super-tall skyscrapers for offices or for industrial chimneys and communication towers. Since the 2000s, many global brand hotels and commercial and residential buildings have been built as super-tall skyscrapers, which shows the recent trend in architecture that is moving beyond the traditional limits. Complex atypical structure is formed and the formative characteristics of diagonal lines and curved surfaces, which are characteristics of atypical architecture, are created digitally. Therefore, it's goal is necessary to identify a new relationship between the structure and forms. According to the data of Council on Tall Buildings and Urban Habitat (CTBUH), 100-story and taller buildings were classified into typical, diagonal, curved, and segment types in order to define formative shapes of super-tall skyscrapers and provide a ground of the design process related to the initial formation of the concept. The purpose of this study was to identify the correlation between different forms for building atypical architectural shapes that are complex and diverse. The study results are presented as follows: Firstly, complex function follows convergence form characteristics. Secondly, fold has inside of architecture with repeat. Thirdly, as curve style which has pure twist, helix twist, and spiral twist. The findings in this study can be used as basic data for classifying and predicting trends of the future super-tall skyscrapers.

• Journal of agricultural medicine and community health
• /
• v.47 no.3
• /
• pp.181-188
• /
• 2022

Objectives: The prevalence of diabetes mellitus was approximately 16% in populations of over age 30 years, and deaths from diabetes mellitus became the sixth most prevalent cause of death by disease. To assess the relationship between HbA1c and heavy metal level in blood and urine, targeted residents were evaluated in a vast steel industrial complex. Methods: We selected 414 subjects for analysis after applying the following exclusion criterion: 18 persons with diabetes mellitus. They took part in a questionnaire survey and underwent blood and urinary assessments. HbA1c and lead (Pb) level were measured in blood and, cadmium (Cd), inorganic arsenic (iAs) and mercury (Hg) were evaluated in urine. Two subgroups were divided by HbA1c 6.5%. Each subgroup was divided by 10th, 20th, 30th, 40th, 50th, 60th, 70th, 80th and 90th percentile levels of biological exposure index of the heavy metals for logistic regression. Results: Odd ratios have a tendency to increase as they go from the 90th to the 10th percentile of cadmium. However, lead, arsenic and mercury did not have significant relationships with HbA1c. In correction of age, region, gender and smoking history, a higher distribution in the subgroup with cadmium above 0.8318 ㎍/g creatinine (30th percentile) was demonstrated in the subgroup with HbA1c levels above the 6.5%, with an odds ratio of 5.26 (95% C.I. ; 1.44~19.17). Conclusion: This study found a significant correlation between urinary levels of cadmium and HbA1c in correction of several factors. It is meaningful that this outcome may be used as a basis for a study to establish the acceptable limit of urinary cadmium in Korea.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.1
• /
• pp.28-43
• /
• 2022

This study classified UAV image-based physical spatial types for parks in urban areas of Changwon City and analyzed thermal comfort characteristics according to physical spatial types by comparing them with ENVI-met thermal comfort results. Physical spatial types were classified into four types according to UAV-based NDVI and SVF characteristics. As a result of ENVI-met thermal comfort, the T_MRT difference between the tree-dense area and other areas was up to 30℃ or more, and it was 19. 6℃ at 16:00, which was the largest during the afternoon. As a result of analyzing UAV-based physical spatial types and thermal comfort characteristics by time period, it was confirmed that the physical spatial types with high NDVI and high SVF showed a similar to thermal comfort change patterns by time when using UAV, and the physical spatial types with dense trees and artificial structures showed a low correlation to thermal comfort change patterns by time when using UAV. In conclusion, the possibility of identifying the distribution of thermal comfort based on UAV images was confirmed for the spatial type consisting of open and vegetation, and the area adjacent to the trees was found to be more thermally pleasant than the open area. Therefore, in the urban planning stage, it is necessary to create an open space in consideration of natural covering materials such as grass and trees, and when using artificial covering materials, it is judged that spatial planning should be done considering the proximity to trees and buildings. In the future, it is judged that it will be possible to quickly and accurately identify urban climate phenomena and establish urban planning considering thermal comfort through ground LIDAR and In-situ measurement-based UAV image correction.

• Journal of the Korean Society of Radiology
• /
• v.16 no.1
• /
• pp.35-43
• /
• 2022

In this study, a survey was conducted and analyzed to find out the satisfaction of online classes among students enrolled in the radiology department of a university located in Busan city. As a result, in terms of satisfaction with online classes, male scores were higher, but there was no statistically significant difference. In the interdisciplinary system, the satisfaction score of the students enrolled in Bachelor's degree was high, and there was a statistically significant difference except for the satisfaction of learning participation (p<0.001, p<0.05). For class satisfaction by grade level, Senior had higher scores, and there were statistically significant differences except for learning participation satisfaction (p<0.001, p<0.01, p<0.05). In the satisfaction survey according to the number of lectures, the scores of the students who took 4-7 lectures were found to be high except for the satisfaction of learning participation, and there was a statistically significant difference (p<0.01, p<0.05). In the method of communication with the instructor, students who used e-mail showed high scores, and there was a statistically significant difference in lecture satisfaction (p<0.05). In the correlation analysis between sub-variables for online classes, statistically significant correlations were established in all areas. Most of the students preferred class methods such as recorded classes and classes using external content such as YouTube, and when asked about the merits of online classes, many students answered that the advantages of online classes were repetitive classes and no restrictions on time and place. When asked about the shortcomings of online classes, many students answered that it was a lack of concentration and lack of communication with the instructor. This study was conducted to provide basic data to improve the satisfaction of online classes that will increase in the future. Therefore, based on the results of this study, it is expected that more quality online classes will be produced so that students' satisfaction with online classes can be improved.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.4
• /
• pp.40-48
• /
• 2023

This study is part of a foundational research effort aimed at developing a suitability index for breeding grounds related to avian activities along the domestic South and West coasts, including islands. Focus Group Interviews (FGI) and Analytic Hierarchy Process (AHP) analyses were conducted. The results are as follows. First, as a result of determining the value of the suitability of coastal bird breeding sites, the 'Natural Value(0.763)' was higher than the 'Artificial Value(0.237)'. Other artificial values were identified as sub-ranked except for 'Protected Areas' to ensure continuous integrity of breeding spaces. Second, as a result of re-establishing the 25 evaluation items classified in the two-time FGI as higher concepts, nine natural values and five artificial values were finally selected as a total of 14. Third, the results of the mid-classification evaluation of the importance of the suitability of coastal bird breeding sites were identified in the order of 'Ecological Value(0.392)', 'Topographic Value(0.251)', 'Passive Interference(0.124)', 'Geological Value(0.120)', and 'Active Interference(0.113)'. Fourth, the results of the priority of evaluation items of coastal bird breeding sites were in the order of 'Vegetation Distribution (0.187)', 'Area of Mudflats(0.118)', 'Presence or Absence of Mudflats(0.092)', 'Appearance of Natural Enemies(0.087)', 'Protected Areas(0.08)', 'Island Area (0.069)', 'Over-Breeding devastation(0.064)', 'Soil Composition Ratio(0.056)', 'Distance from Land(0.054)', 'Ocean farm area (0.045)', 'Cultivated land area(0.041)', 'Cultivation behavior(0.038)', 'Angle of the Surface(0.036)', and 'Land Use(0.033)'. It is judged that the weighting result value of the evaluation items derived in this study can be used for priority evaluation focusing on the coastal bird breeding area space. However, it seems that the correlation with the unique habitat suitability of bird individuals needs to be supplemented, and spatial analysis research incorporating species-specific characteristics will be left as a future task.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.1
• /
• pp.27-41
• /
• 2008

Distribution characteristics of phytoplankton community were investigated by HPLC and flow cytometry in Jeju Strait and the Northern East China Sea (NECS) in May 2004, in order to understand the relationship between physical environmental factors and distribution pattern of phytoplankton communities. Based on temperature and salinity data, three distinct water masses were identified; warm and saline Tsushima Warm Current (TWC), which is flowing from northwest of Jeju Island, warm and low saline water at the center of Jeju Strait, which is originated from China Coastal Water (CCW) and relatively cold and high saline water originated from Yellow Sea at the bottom of the Jeju Strait. At Jeju Strait, less saline water (<33 psu) of 15 km width occupied surface layer up to 20 m which located at 20 km offshore and strong thermal front between warm and saline water and cold and less saline water was found in the middle of the Jeju Strait. Vertical transect of temperature and salinity at the NECS also showed that low saline (<33 psu) water occupied the upper 20 m layer and cold and saline water was present at the eastern part. Chl a was measured as $0.06{\sim}3.07\;{\mu}g/L$. Spring bloom of phytoplankton was recognized by the high concentrations of Chl a at the low saline water masses influenced by the CCW and subsurface chlorophyll maximum layer appeared between $20{\sim}30\;m$ depth, which was at thermocline depth or below. Abundances of Synechococcus and picoeukaryote were $0.2{\sim}9.5{\times}10^4\;cells/mL$ and $0.43{\sim}4.3{\times}10^4\;cells/mL$, respectively. Dinoflagellate, diatom and prymnesiophyte were major groups and minor groups were chlorophyte+prasinophyte, chrysophyte, cryptophyte and cyanophyte. Especially high abundance of dinoflagellate was identified by high concentration (>1\;{\mu}g/L$) of peridinin at the bottom of the thermocline, which showed an outbreak of red tide by high density of dinoflagellates. Abundances of picoeukaryote in Jeju Strait were about $5{\sim}10$ times higher than abundance measured in Kuroshio water and showed a good correlation with Chl b (Pras+Viola), which implies the most of population of picoeukaryote was composed of prasinophytes. Prochlorococcus was not detected at all, which suggests that Kuroshio Current did not directly influenced on the study area. Based on the strong negative correlations between biomass of phytoplankton (Chl a) and temperature+salinity, the primary production and biomass of phytoplankton in the study area were controlled by the nutrients supply from CCW.