• Journal of the Korean earth science society
• /
• v.33 no.3
• /
• pp.269-279
• /
• 2012

Satellite-retrieved data on Aerosol Optical Depth (AOD) and ${\AA}$ngstr$\ddot{o}$m exponent (AE) using a Moderate Resolution Imaging Spectrometer (MODIS) were used to analyze large-scale distributions of atmospheric aerosols in East Asia. AOD was relatively high in March ($0.44{\pm}0.25$) and low in September ($0.24{\pm}0.21$) in the East Asian region in 2009. Sandstorms originating from the deserts and dry areas in Northern China and Mongolia were transported on a massive scale during the springtime, thus contributing to the high AOD in East Asia. Although $PM_{10}$ with diameters ${\leq}10{\mu}m$ was the highest in February at Anmyon, Cheongwon and Ulleung, which is located leeward about half-way through the Korean Peninsula, AOD rose to a high in May. The growth of hygroscopic aerosols moving with increases in relative humidity prior to the Asian monsoon season contributed to a high AOD level in May. AE typically reaches its highest value ($1.30{\pm}0.37$) in August due to anthropogenic aerosols originating from industrial areas in Eastern China, while AOD stays low in summer due to the removal process caused by rainfall. The linear correlation coefficients of the MODIS AOD and ground-based mass concentrations of $PM_{10}$ at Anmyon, Cheongwon and Ulleung were 0.4-0.6. Four cases (six days) of mineral dustfall from sandstorms and six cases (twelve days) of anthropogenically polluted particles were observed in the central area of the Korean Peninsula in 2009. $PM_{10}$ mass concentrations increased at both Anmyon and Cheongwon in the cases of mineral dustfall and anthropogenically polluted particles. Cases of dustfall from sandstorms and anthropogenic polluted particles, with increasing $PM_{10}$ mass concentrations, exhibited higher AOD values in the Yellow Sea region.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.549-556
• /
• 2017

This study investigated the importance of social cognitive intervention and the cognitive rehabilitation intervention by comparing the difference and examining the relationship between neurological cognitive function and social cognitive function of stroke patients in the acute phase and chronic stroke before returning to the community. LOTCA, cartoon intention inference task, and social behavior sequence task were performed on 30 acute stroke inpatients and 30 chronic stroke patients from May 2015 to June 2016. A two sample t test was conducted to examine the differences between the groups. The Pearson's correlations test was performed to examine the correlation among the variables in each group. As a result, there were statistically significant differences between the neurological cognitive function and social cognitive function of acute stroke patients and chronic stroke patients who were undergoing rehabilitation training before returning to the community (p<0.05). A linear relationship was found between the thinking operation and social behavior sequence task in the acute stroke group (r=0.539, p<0.05). In the chronic stroke group, visual perception (r=0.530, p<0.05), visual motor organization (r=0.655, p<0.05) and thinking operation (r=0.534, p<0.05) were correlated with the cartoon intention inference task. In addition, the social behavior sequence task were correlated with visual organization (r=0.534, p<0.05) and thinking operation (r=0.764, p<0.05). As a result of multiple regression analysis, the neurological cognitive functions influencing the social cognitive function in the cartoon task was found to be the thinking operation (B = 0.431) in acute stroke patients and the thinking operation (B=0.272) and visuomotor organization (B = 0.218) in the case of chronic stroke. In addition, the results of the social behavior sequence task revealed the thinking operation (B=0.417) in the acute stroke patients, and thinking operation (B=0.267), visual motor organization(B=0.274) and visual perception(B=151) in chronic stroke patients to be significant. According to this result, there is a difference in the neurological and social cognitive levels between the two groups. Therefore, the social cognition is strongly related to the high level cognitive function as thinking operation of the neurological cognitive function. Therefore, in further research, it would be necessary to determine if there is a change in higher cognitive function in neurological cognitive function after applying a social cognition intervention program for stroke.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.264-273
• /
• 2012

This cross-sectional study was investigated musculoskeletal discomfort symptoms and related factors on some middle high school teachers. Self-questionnaire of KOSHA CODE H-30-2003 was done with 250 teachers from 1st to 15th October, 2010, the data from 231 teachers (68 male, 163 female) was statistically analyzed to search the factors related to musculoskeletal discomfort symptoms. According to NIOSH rate of musculoskeletal discomfort symptoms by body parts was 36.8%. Musculoskeletal discomfort symptoms related to age, school types, subjective health status, housekeeping time, VDT work time and regular rest. After adjusting for related variables, odds ratio (OR) of musculoskeletal discomfort symptoms was correlation significantly to subjective health status unhealthy (OR 11.75, 95% Confidence Interval, CI, 3.56-378.78). In addition, ORs (95% CI) of age (40-49) and housekeeping time (${\geq}3$) were 4.63 (1.82-26.18) and 4.33 (1.97-19.34). Analysis of the factors influencing the musculoskeletal discomfort symptoms vary in different parts of the body. The most discomfort symptoms by parts was neck (26.0%) and shoulder (30.0%). In the neck region was related to subjective health status and regular rest. In the shoulder and waist region was subjective health status and sex. Age was wrist/finger, leg/foot was related to subjective health status, sex and VDT work time. Age, school types, subjective health status, housekeeping time, VDT work time and regular rest related to musculoskeletal discomfort symptoms and the most discomfort symptoms by parts was neck and shoulder.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.206-214
• /
• 2018

This study was conducted from August 2017 to May 2018. Beer was prepared by different ratio of rice and malt and different types of beer, and quality analysis were conducted. The ratio of rice and malt was divided into 0:100 (S0), 20:80 (S1), 40:60 (S2), 60:40 (S3) and 80:20 respectively. We compared the characteristics of the mashing methods(infusion and decoction method) and investigated the characteristics of different types of beer (lager, ale, wheat beer) using yeast (bottom and top yeast). Even with different ratios of rice and malt, normal infusion time was observed and the iodine test was confirmed to be normal. Also, the mashing proceeded normally and the sugar content of the primary wort was between $21.0{\sim}21^{\circ}brix$. In mashing method, the mash concentration, color and flavor of wort were the highest in the three mash method(decoction method). During the fermentation period of beer, the sugar content, pH and yeast number did not differ significantly depending on the ratio of rice and malt, and the type of yeast. Higher alcohol and esters also had no correlation with the ratio of rice to malt, and wheat beer was somewhat higher. The higher the ratio of rice, the more the color intensity(EBC) decreased, the bitter unit(BU) and the preference decreased. When the rice ratio was higher than the malt rate, the degree of preference decreased significantly. Based on the results of this study, it is expected that the rice ratio will be less than the malt ratio and the flavor of the wort will be improved by using the deccoction method. If the malt is supplemented with the use of the special malt and the various hops according to the beer type, it may be helpful to manufacture rice beer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2142-2147
• /
• 2012

This study is aimed at decreasing wrong diagnosis with corrected EF(Ejection Fraction) of 2D echo cardiography by analysing the physical time-resolution difference between Cine MRI and 2D echo cardiography and applying the corrected EF in 2D echocardiography. From February 2010 to December 2011, among the 110 patients who had undergone both 2D echo cardiography and cine MRI only 37 patient were selected suffering aortic valve regurgitation. ED, ES and SV were measured and EF was calculated in each system while normal ranges of Cine MRI and 2D echocardiography were compared to evauate misdiagnosis rate. The correlation of physical time resolution between 2D echocardiography and MRI was evaluated and the differences were corrected with linear regression coefficient which is derived from linear regression analysis. Blandt-Altman plot was used to evaluate the reliability of corrected 2D echo cardiography EF and compare the error among measured values. The values were compared with MRI normal range and misdiagnosis rate was measured again. As a result, misdiagnosis rates of physical time resolution were measured to be 32.4%(12people) before the correction of EF and 18.9%(7people) after the correction. Also, EF confirmed in Blandt-Altman plot were almost the same with MRI EF. In conclusion, when diagnosing aortic regurgitation disease, simply using 2D echocardiography can easily raise the misdiagnosis rates, therefore considering the MRI machine's physical merits, correcting the time resolution difference is important by calculating time resolution wrong diagnosis would decrease and it is considered to be useful in clinical circumstances.

• Korean Journal of Occupational Health Nursing
• /
• v.8 no.1
• /
• pp.22-41
• /
• 1999

This study intended to analyze the health promoting behaviors, compare their factors according to the shift pattern of duties of women workers who were working in the industrial workplace and present basic data in planning systematic and effective programs of health promotion for three-shift system and day-duty. Using Quota Sampling, 219 women workers were selected as subjects from 5 workshops which had 50 settled workers up to 300 and 10 factories which had more than 300 located in Taegu and Kyung-Book Province. Data were collected by means of questionnaire from September 12 to September 30, 1998. As the instruments of the study were used Health Promotion Lifestyle Profile(HPLP) which was adapted and adjusted by Seo, Y. O. for health promoting behavior, the one developed by Moon, J. S. (1990) for health-belief, the one developed by Sherer et al.(1982) and then adapted by Oh, H. S. for self-efficacy, and the one developed by Park, J. W. (1985) for social support. The analysis of data were performed with Cronbach's ${\chi}^2$-test, t-test, ANCOVA, Kendal tau, Pearson correlation, Stepwise Multiple Regression test using SPSS program. The results of the study are as follows : 1. There was a significant difference in age(${\chi}^2=32.46$, p=0.000), career (${\chi}^2=18.47$, p=0.000), working day(t=-3.18, p=0.000) by the shift pattern of duties in terms of socio-demographic characteristics. 2. There was a statistically significant difference between the two groups on the health promoting behaviors (t=2,52, p=0.012). The score of three-shift group on health promoting behaviors was 2.27, showing that it was lower by .13 than that of day-duty group(2.40). 3. ANCOVA involving age, career and working day as covariables, which had revealed significant difference before, showed that health promoting behaviors by the shift patterns of duties was significantly different(F=4.88, p=0.028). 4. In consideration of variables that have an influence on health promoting behavior by the shift pattern of duties, social support occupied 19.4% of health promoting behavior in the three-shift group and 22.5% including the sense of self-efficacy. In the day-duty group, social support occupied 34.4% of health promoting behavior. 5. The score of three-shift group(2.94) was significantly lower than that of day-duty group(3.12) in the perceived benefit of health-belief(t= -3.29, p=0.001), while the score of three-shift group (2.48) was significantly higher than that of day-duty group(2.24) in the perceived barrier (t=4.22, p=0.000). In the sense of self-efficacy(t=-4.20, p=0.000), the score of three-shift group(3.24) was significantly lower than that of day-duty group(3.53) while in social support(t=-4.56, p=0.000) the one of three-shift group(2.64) was significantly lower than that of day-duty group(2.88). The suggestions are as follows on the basis of the results of this study : 1. It is required to develop health promoting program that takes the shift pattern of duties of women workers into consideration. In addition, there are special demands on developing nursing strategies for health promoting behavior of three-shift workers. 2. It is required to develop specific strategies for social support which is the most significant factor to the health promoting behavior for women workers. 3. It is necessary to develop some programs for improving the sense of self-efficacy, social support, and health-belief of three-shift workers. To achieve these tasks, industrial nurses should play an active role and improve the ability of self-health care of women workers.

• Korean Journal of Remote Sensing
• /
• v.33 no.6_2
• /
• pp.1101-1118
• /
• 2017

Temperatures in urban areas are steadily rising due to rapid urbanization and on-going climate change. Since the spatial distribution of heat in a city varies by region, it is crucial to investigate detailed thermal characteristics of urban areas. Recently, many studies have been conducted to identify thermal characteristics of urban areas using satellite data. However,satellite data are not sufficient for precise analysis due to the trade-off of temporal and spatial resolutions.In this study, in order to examine the thermal characteristics of Daegu Metropolitan City during the summers between 2012 and 2016, Moderate Resolution Imaging Spectroradiometer (MODIS) daytime and nighttime land surface temperature (LST) data at 1 km spatial resolution were downscaled to a spatial resolution of 250 m using a machine learning method called random forest. Compared to the original 1 km LST, the downscaled 250 m LST showed a higher correlation between the proportion of impervious areas and mean land surface temperatures in Daegu by the administrative neighborhood unit. Hot spot analysis was then conducted using downscaled daytime and nighttime 250 m LST. The clustered hot spot areas for daytime and nighttime were compared and examined based on the land cover data provided by the Ministry of Environment. The high-value hot spots were relatively more clustered in industrial and commercial areas during the daytime and in residential areas at night. The thermal characterization of urban areas using the method proposed in this study is expected to contribute to the establishment of city and national security policies.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.1
• /
• pp.78-86
• /
• 2009

Recently, there seems to besome problems in the urban visual landscape as a result of continuous economic growth and industrial development. At the same time, the public has begun to be aware of the importance of visual resources, and the necessity for visual landscape conservation and improvement. Therefore, the development of evaluative indicators for systematic visual landscape planning and design is urgent. The purpose ofthis study is to discover evaluative models and indicators for the diagnosis of urban visual landscapes. This study included the selection of 18 physical indicators(statistical data) by literature reviews, adoption of field and questionnaire surveys at 12 autonomous districts in Seoul and surrounding major mountain valleys and river streams(i.e. Mt. Nam and Han-River). The content of the questionnaire is scenic beauty. Moreover, the linear regression analysis between the scenic beauty mean scores and the physical indicator scores figure out the scenic beauty prediction model. As this study suggests, the most important indicators in urban visual landscapes are 'Greens', 'Park' and 'the number of apartment buildings(higher than 20 stories).' Based on the results, greens and parks should be priority elements to considerin urban landscape planning and design. Moreover, since the number of apartment buildings that are higher than 20 stories has a negative correlation with the scenic beauty score, it can be used as basic data for landscape planning. For the scenic beauty prediction models and evaluative indicators suggest a direction of urban management, each indicator becomes basic data for visual landscape planning and design. In following studies, if physical indicators and case studies are added, the scenic beauty prediction models and evaluative indicators could be more synthetic and systematic. Moreover, the development of physical indicators in three dimensions(3D)(i.e. results from visual district analysis, view surface analysis) could be expected to obtain more general and varied results.

• Journal of Preventive Medicine and Public Health
• /
• v.16 no.1
• /
• pp.59-65
• /
• 1983

Screening data from preplacement and periodic examination in Gu Mi Industrial Estate from May, 1983 to June, 1983 provide an opportunity to evaluate the accuracy of self-reported height and weight. The data for men and women were analyzed separated for effects of age, marrital status, educational level, employment status, measured height, measured weight and relative weight (percent of ideal body weight). The mean percent discrepancy from self-reported and measured height was analysed by cross-tubulation, P. value for analysis of variance and multiple correlation analysis in men and women. It is clear from the data that self-reported height and weigt differ from the quantities in systemic ways. But the magnitude of misreporting is very small on average except for weight in women. Whereas height tend to be over-reported, weight is under-reported in women but over-reported in men. Weight was accuracte for age group 20-29 years in men and age group over 40 year in women and over-reporting of weight increased with age in men and under-reporting of weight decreased with age in women. Weight was accurate in 60-64kg group in men and under 50kg group in women and under-stating of weight increased with weight in men and women. Weight was the most accurate in 100-109 percent relative weight group in men and in 90-99 percent relative weight group in women and under-stating of weight increased with relative weight and over-stating decreased with relative weight and over-stating decreased with relative weight in men and women. Height was the most accurate for group of primary school and except group of primary school, accuracy of height increased with educational level in men and women. In height, the highest measured height groups (over than 175cm measured height in men and over than 165cm measured height in women) were the most accurate and of over-reporting of height decreased with measured height. Single variable regression analysis and ANOVAs showed age(P<0.003), measured weight(P<0.0001) relative weight(P<0.0001), educational level(P<0.0005) and employment status(P<0.0007) to be significantly related to ${\Delta}WT$ in women and measured height(P<0.0001), educational level(P<0.03) and marrital status (P<0.03) to be significantly related to ${\Delta}WT$ in men. The women were more sensitive about her body weight than height.

• Journal of Bio-Environment Control
• /
• v.22 no.3
• /
• pp.284-290
• /
• 2013

This study analyzed the geometric, compressive, cutting and friction properties of oriental melons in order to design a gripper capable of soft handling and a cutter for cutting oriental melon vine among the end effector of oriental melon as a preliminary step for developing the end effector of the robot capable of harvesting oriental melons in protected cultivation. As a result, the average length, diameter at the midpoint, weight, volume and roundness of the oriental melons were 108 mm, 70 mm, 188 g, 333 mL and 3.8 mm. Nonlinear regression analysis was performed on the equation $W=L^a{\times}D_2^b$ with variation of the length (L) and diameter (D2) of the weight (W) of the oriental melons. As a result, it was shown that there was a correlation between a of 2.0279 and b of -0.9998 as a constant value. The average diameter of the oriental melon vine was 3.8 mm, and most vines were distributed within a radius of 5 mm from the center. The average yield value, compressive strength and hardness of the oriental melons were $36.5N/cm^2$, $185.7N/cm^2$ and $636.7N/cm^2$, respectively. The average cutting force and shear strength of the oriental melon vines were $2.87{\times}10^{-2}\;N$ and $5.60N/cm^2$, respectively. The maximum friction coefficient of the oriental melons was rubber of 0.609, followed by aluminium of 0.393, stainless steel of 0.177 and teflon of 0.079. It was considered possible to apply it to the size of the gripper and cutter, turning radius, dynamics of drive motor and selection of materials and their quality in light of the position error and safety factor according to the movement when designing end effector based on the analyzed data.