• Journal of the Korean Society of Safety
• /
• v.29 no.5
• /
• pp.88-96
• /
• 2014

Each year, it seems inevitable that major accidents will occur on construction sites. Industrial accidents, sometimes involving foreign laborers, have been constantly increasing. Construction laborers have higher hazard rates and higher work intensity than other industries, which means that they experience more job stress, as a result of the subcontracting structure. Therefore, this study performed an influence factor analysis on job stress and its relevance to industrial accidents involving Korean and foreign construction laborers, and proposed its effectiveness with the job stress and construction accident management measures based on the results of those. A questionnaire to measure job stress was performed targeting Korean and foreign laborers, and the results were analyzed. The results of this study can be utilized as important reference materials in efforts to reduce the job stress of foreign laborers on construction sites, and can be expected to contribute to preventing construction accidents related to job stress in the future.

• Journal of the Korean Society of Safety
• /
• v.14 no.4
• /
• pp.176-181
• /
• 1999

The objective of this study is to compare and analyze the industrial injury-values of all the industries through yearly accident rate and frequency rate based on the governmental documentation of industrial injuries. The samples for this study are chosen from the companies with less than 200 employees under charge of the Kangnung Ministry of Labor during the period of 1995-97. Safe-T-Score is used for statistic control on the qualitative comparison of the present and the past industrial injury-rates. In the comparison of the past and the present industrial injury-rate by means of Safe-T-Score, this study shows that there does not exist any remarkable improvement, whereas the document of the Ministry of labor reports that the rate is decreasing greatly. Therefore, this study proposes some solutions to reduce industrial disasters and points out the necessity of more practical and effective methods to analyze the industrial disaster.

• Safety and Health at Work
• /
• v.14 no.3
• /
• pp.295-302
• /
• 2023

Background: Fisheries and aquaculture are statistically acknowledged to be among the most dangerous occupations. Yet, industrial safety and health precautions against occupational accidents within the sector are not sufficiently implemented in many parts of the world. The present study aims to provide a quantified overview of work accident statistics in the Turkish fisheries and aquaculture industry. Methods: This article presents an overview of reported injuries and fatalities in the Turkish fisheries and aquaculture industries from 2006 to 2020. Incident, permanent incapacity, and fatality rates were calculated, and the difference between fisheries and aquaculture was statistically examined. Results: The overall incident, permanent incapacity, and fatality rates were 449.4, 4.7, and 5.7 per 100,000 worker years, respectively, over the 15-year period. With these fatality rates, fisheries and aquaculture are two of the industries with the highest fatality rates among comparable industries in Turkey. Incident rates in fisheries and aquaculture indicated that aquaculture work is more dangerous and risky. The data set includes 25 fatalities and 22 permanent incapacity cases over 15 years and shows an increase in fatality rates and occupational accidents in the last 8 years. Conclusion: present study showed that the quality of data and reporting in the Turkish fisheries and aquaculture industries including occupational illnesses, must be improved in order to be more preventative and to develop efficient safety management in the sector. Incentives for providing thorough data on occupational incidents must be enhanced to improve occupational safety awareness in Turkish fisheries and aquaculture.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.153-161
• /
• 2022

Among all industries, the construction industry still remains a traditional one with low productivity due to its labor-intensive and field-dependent production system, its supplier-oriented industrial structure, and the disruption of the information flow between participants. In addition, the construction industry in South Korea has recently been required to transform itself according to social trends such as aging, the reduction of skilled workers, and the shortening of working hours, and the disaster and death rates in the industry, which are more than twice as high as those in other industries, are making it more necessary to solve chronic safety problems. Therefore, the purpose of this study is to grasp the actual condition of safety management on construction sites in South Korea and analyze cases of K-smart technology utilization for preventing safety accidents on construction sites. The study investigated and analyzed the following. First, construction sites in South Korea were analyzed by type of safety accident, by type of construction, and by construction contract amount. Second, the current status of accidents on small-sized construction sites with a high fatal accident rate and cases of safety accidents on construction sites were investigated. The results of the study are expected to contribute to the dissemination and spread of smart safety technology for not only identifying major factors in safety accidents that occur on construction sites but also preventing workers from suffering accidents.

• Journal of the Korean Society of Safety
• /
• v.37 no.4
• /
• pp.44-50
• /
• 2022

This study examines the relationship between safety factors and health management systems based on accident statistics in the construction industry stipulated in the Serious Disaster Punishment Act. To determine the level of safety achieved by companies through their health management system, the top 1000 construction firms in the country were surveyed online. Four hundred sixty companies responded to the survey by providing their statistics on major accidents (mortality, accidental mortality, and injury rates). Statistical tests showed that companies with a team dedicated to the oversight of safety and health management had fewer accidents than those without one. Factor and regression analyses revealed that three factors affected the mortality and accident rates: safety and health plan, safety and health professionals, and safety and health activities. Moreover, two factors significantly influenced the injury rate: safety management supported by a cooperative company and implementation of on-site safety and health activities. The findings of this study can be used as a fundamental reference for further research and consultation on the formulation of safety and health management systems for construction companies.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.49-53
• /
• 2013

If industrial safety statistics are analyzed, among the total of 2,114 dead people from industrial disasters in 2011, construction workers took 29.4% with 621. The construction industry makes a lot of efforts to reduce the death toll. However, since the measures are not from the analysis of root causes but from superficial countermeasure plans near general matters, it is in a situation that the actual effectiveness is marginal. Therefore, in this paper, improvement measures were intended to be prepared in order to reduce accidents, by inspecting safety control systems of target companies with high accident rates among major construction firms and extracting overall problems of them.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.4
• /
• pp.1-6
• /
• 2004

For a given plant design, improved decisions on when to shutdown an existing plant may be obtained by making better predictions of failure rates, by exerting efforts to collect more relevant information or by improving decision making models which put that information to best use. It is important that the models include the value of possible loss of lives and fear along with cleanup, decommissioning, relocation if the decisions derived from the model are to be useful. The decision model we have described enables us to investigate a class of optimal decisions on whether to shutdown or continue operating one period of time. The analysis and decision process is repeated at the end of each period with additional information about new costs and risks.

• Korean Journal of Occupational Health Nursing
• /
• v.22 no.3
• /
• pp.249-256
• /
• 2013

Purpose: This study was conducted to compare the rates of industrial accidents in workplaces that adopted the 2011 Workplace Health Promotion Subsidy Scheme before and after the implementation. Methods: The study analyzed the raw data of industrial accidents of 304 workplaces which received subsidies for health promotion activities in 2011. The raw data covered the period from February 2010 to July 2012, based on the dates of industrial accidents. Results: Workplaces subsidized for health promotion activities reported fewer occurrences in staff injuries and illnesses than before the subsidization, as the total number of industrial accident victims dropped from 0.35 to 0.24. The rate of industrial accidents also dropped from 0.49 to 0.35, with the number of working days decreased from 35,433 to 23.867, about 33%. Conclusion: The study showed that financial support for health-promoting activities contributed to the decease in industrial accidents, which is an important indication advocating the need for corporate and government investment on workers health promotion programs. Furthermore, this study is also significant as it is the first research conducted in Korea to examine the impact of a workers health promotion project using a direct indicator, the rate of industrial accidents.

• Journal of the Korean Society of Safety
• /
• v.34 no.3
• /
• pp.83-88
• /
• 2019

The 7,993 cases of Survey Report of Fatal Industrial Accidents conducted jointly by the MEOL and the KOSHA for the recent seven years(2007-2013) were categorized according to personal and occupational characteristics, industry types, business sizes, job types, activities at the time accident, types of accidents, material agents(assailing materials), unsafe conditions, and unsafe acts. And it is found that among the 72.2 percent of fatal occupational accidents in the construction and manufacturing industries are caused by falling, sticking, bumping and being caught under objects & overturning. For this study, through the empirical analysis on causes of fatal industrial accidents, was used to identity high risk groups based on total data of 7,993 victims of occupational accidents. An annual fatal occupational injury (FOI) rate per 10,000 workers was about 0.47‱. The middle-aged group and the elderly group showed the highest FOI rates per 10,000 workers (0.73‱, 0.80‱), and the daily workers showed the highest FOI rate (1.46‱), and the craft and related trades workers showed the highest FOI rate (2.17‱). In case of industry type the mining industry (7.26‱) showed the highest FOI rate, followed by the sewerage, waste management, materials recovery and remediation activity industry (3.91‱) and the construction industry (2.71‱). The primary high risk target group that requires a strategy designed to reduce fatal occupation injuries caused by falling and bumping & contact(collision) is the construction industry, and the secondary high risk target group in the construction industry is classified as the equipment, machine operating and assembling workers in the construction industry, those aged 50 years old and above need the prevention measures against bumping & contact(collision) and being caught under an object & falling(objects), while those aged less than 50 years old need prevention measures against falling(persons).

• Journal of the Korea Safety Management & Science
• /
• v.24 no.3
• /
• pp.39-46
• /
• 2022

This study has found the socio-economic factors that affect occupational accidents and measured the influence quantitatively. We built the panel data of 4 countries (Japan, Germany, the U.S., and the U.K.) and the analysis model counted on the fixed effect model to reflect the countries' differences. The fatal occupational injury rates in the analyzed countries had a statistically significant relationship with the level of per capita GDP, the proportion of the construction industry, the rate of male workers, annual average working hours, the rate of workers in manufacturing and construction industries, etc. The annual average working hours have a positive correlation with the fatal occupational injury rate. To reduce occupational accidents effectively, we should be monitoring and researching various factors that can affect the occurrence of occupational accidents such as worker characteristics, changing industrial structure, and changes in working hours.