• Journal of the Korea Institute of Building Construction
• /
• v.20 no.5
• /
• pp.471-480
• /
• 2020

Although the domestic industrial accidents have been decreased gradually, deaths in the construction sites have been occupied 49.9 percent of the total industry and deaths from fall accident have been accounted for 59.7 percent of the construction industry. In order to prevent fall accident, various safety activities and policy have been carried out. However, the impact on the domestic construction industry was inadequate. On the other hand, in advanced countries, such as the United States, Japan, EU, and Singapore Industrial accidents have been lower than domestic industry due to safety activities, the regulations and policies appropriate for each country's situation. In this study, we compare the major points of the Industrial Safety and Health Act in developed countries with those in South Korea to reduce the number of falls, and propose a revision. As a result of conducting research, three revisions have been proposed as 1) Enhance standards for fall height, 2) Improvement of upper safety rail height on guardrail, 3) Revision and research on Horizontal Sarety bar attachment system. This study will be utilized as a basic study for the analysis of cases in advanced countries.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.424-430
• /
• 2021

Determining the cause of a traffic signal violation is difficult if the drivers' claims are contradictory. In this study, the process of identifying signal violations using a simulation was presented based on cases. First, statements from the driver or witness whose cause of the signal violation is unclear were excluded. Second, the final position, final location, damaged area, steering status, braking status, and road surface traces of the vehicle were collected. The impact point was investigated from the stop line. Third, simulation data were modified and entered until the collision situation of the accident vehicle and the final stop position were met. Fourth, if the simulation results were consistent with the crash situation, the facts were verified by cross-validation to conform to the driver's statement. The results of the simulation showed that the Lexus entered the left turn signal in the intersection at approximately 55 km/h. In comparison, the Sonata driver saw the vehicle straight ahead at the intersection, entered the 72 km/h intersection, and collided with the Lexus. Therefore, the Sonata was identified as a signal violation, and the claims of the Sonata driver, witnesses, and police were contradictory.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.1
• /
• pp.7-14
• /
• 2009

Protecting an infant from a risk of accident was an absolute responsibility and duty of parents in the past. As increase in the ratio of entering kindergartens, the demand of all day program also increases. In infancy, safety concerns are higher than other periods since infants are curious about objects and environments and that have stronger impulse of the spirit of inquiry. Since baby's functioning is poor, an ability of balance maintenance and an exercise function are not sufficiently developed. Further more, they lack a cognitive power about self-control or situation. According to Korea Consumer Agency, safety accidents in infant institution have increased in 115% as 294 cases compared with 137 cases in 2004. Major causes of infant deaths are street accidents, drowning, and deaths from a fall in order. Considering this situation, we need to prevent and deal with accidents. Therefore this thesis grasp the situation and analyze an actual condition of an safety education about teachers who work in such institutions and infants who are educated in institutions to prevent from accidents and make up pleasant environments. Then, it will suggest all efficient safety education plans for infants to them.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.3
• /
• pp.17-25
• /
• 2009

This study was aimed to analyze of characteristics of Musculoskeletal disorders (MSDs) based on the industrial accident statistics which were extracted from the Ministry of Labor. In this study all MSDs cases in 2007, 7,723 cases, were investigated. First of all, for the analysis of a wide view point concerning the characteristics of MSDs, We have inspected characteristics of the user population (i.e. age, gender, employed periods, etc.). Secondly, work-related risk factors such as repetitive motions, awkward postures, manual material handling were analyzed in terms of disease code, injured part of body, types of business, etc. Next, characteristics of handling of heavy materials were analyzed according to weight, types of handling, agency of cause, etc. Finally, we have compared and analyzed the features between the period of hospitalization and other variables. In addition to that we also conducted statistics analysis. The study results showed that there were significant characteristics of MSDs that could be used as basis data for the MSDs prevention policy.

• Journal of Korean Institute of Industrial Engineers
• /
• v.18 no.1
• /
• pp.25-36
• /
• 1992

A possible adverse effect on the likelihood of front-seat occupant fatalities from unbelted rear-seat occupants in frontal crashes is investigated using Fatal Accident Reporting System data. Passenger cars which sustained frontal damage and which did not roll over are included in this analysis. Of the frontally damaged cars, only cars containing a driver and a right-front passenger are selected. Then, from these cars, the following three cases are considered: a) left-rear occupant present, b) right-rear occupant present, and c) no one else in the car. Cars belonging to a) or b) contain only three occupants, and those belonging to the last case contain only two occupants. In addition, all occupants are unbelted. To estimate the influence of rear-seat occupants on front-seat occupant fatalities, relative risks of driver and right-front passenger fatalities are compared pairwise across these three cases. The adverse influence of unbelted rear-seat occupants on the likelihood of unbelted front-seat occupant fatalities in frontal crashes is estimated to be 7.9% ${\pm}$ 45%(the error limits indicate one standard error). In other words, front-seat occupant fatalities are increased 7.9% in frontal crashes due to the loadings from unbelted rear-seat occupants. This suggests that the usage of safety belts by rear-seat occupants not only may extend their own lives but also helps in reducing the fatalities of front-seat occupants seated in front of them.

• Journal of Preventive Medicine and Public Health
• /
• v.14 no.1
• /
• pp.89-96
• /
• 1981

Of 2,740 industries in Jeonbug area which are covered by industrial insurance policy, 462 facilities which the accidents related to industry occured during the year of 1979 were studied. and the results are summarized as follows: 1. The accidents related to industry occured in 462 industries of the total 2,740 industrial facilities in Jeonbug area as of 1979. 2. The incidence rate of accident per 1,000 workers was 34.3 (49.2 in male workers and 12.8 in female workers), the frequency rate of the total industries in jeonbug area was 13.36, and severity rate was 1.3. 3. The frequency rates and severity rates by type of industry in study area were quite different to compare with those of national rates. 4. The incidence rate of construction industry was 223.6 per 1,000 workers, and that of transportation-communication industries were 78.6. 5. The proportion of industrial accidents of $20{\sim}24$ age group was 22.1 per cent of the total accidents, and the proportions decreased according to age increase. 6. The incidence rate in the industry having less than 49 workers was 20.6 per 1,000 workers, that of industry with $50{\sim]99$ workers was 26.7, that of industry with $100{\sim}199$ was 51.9, that of industry with $200{\sim}499$ was 80.2 and that of with more than 500 worker was 40.7. 7. The accidents which occured in the workers with experience of less than one year was 69.4 per cent of the total accidents, otherwise, the longer the workers have worked the less accident they have. 8. The most accidents occured in tile shift between 10 to 12 o'clock, and 16 to 18 hour 9. The primary causes of the industrial accidents were found to be collisions, machinery falling objects and falls. 10. The site of injury by type of industry were quite different, and the major site of injury was finger. 11. The laceration and open injuries of the accidents related to industry were 37.2 per cent of the total cases, and fractures or dislocations were 23.5 per cent, and contusions were 6.5 per cent. 12. Death rate of industrial accident was 5.0 per 10,000 workers, and those of industry were 47.6 in transportation, 42.8 in construction industry, 24.4 in mine industry, and 2.0 in manufacturing industry.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.13 no.22
• /
• pp.71-78
• /
• 1990

Some problems to assess the safety of automated man-machine system are studied in many ways. The difficulty occurred in this system is the vagueness of human behavior. Fuzzy set theory is used to assess the human behavior in safety analysis. The unsafe behavior listed top 10 in accident statistics would be explained as the factors of human vagueness. Three cases are considered, which consist of man-machine system as man-man, man-machine, machine-machine types. For the design of safe task, using characteristics of work performance, each motion cycle time is required to know the rate of learning. Approach of human behavior to the standard motion means more safe motion. It is important to design the works as to minimize the time performance to the standard motion's, which utilize the control of risk potential with easy. In that process, use of fuzzy set theory is appropriate to analyze the human behavior to identify its vagueness.

• Journal of Industrial Technology
• /
• v.15
• /
• pp.5-13
• /
• 1995

Natural gas, which is getting more important as a fuel, should be liquefied and shipped in a special tank. During transportation, a spill of liquefied natural gas(LNG) could occur by a collision or even an accident. As a result, violent explosion called the superheat-limit explosion(SLE) can take place in some cases, unexpectedly. Such explosion may result from the formation of a superheated liquid which has attained the superheat-limit temperature when hot(water) and cold(LNG) liquids come into contact. Natural gas mixtures can be considered as discrete light components plus continuous heavy fractions where several continuous distribution function can be adopted. This work is aiming at prediction of the superheat-limit explosion condition by suing continuous thermodynamics development of algorithm to predict.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.22-29
• /
• 2012

Robot related injuries in industrial accidents statistics during 2008~2010 have accounted for a total of 109 cases equivalent to 30~40 cases for each of those years. The number of injured compared to the dissemination of industrial robots(51,302 units/2004) can be regarded as quite low. However, the fatal injuries sustained by 7 (6.4%) out of 109 cases paints the stark reality of robot-related accident fatalities. It is a sad probability that as the automation process expands its use of industrial robots which have increased significantly in demand, the incidence of workplace accidents will also increase. Therefore, the incidence of accidents throughout the period of 2008~2010 has been analysed to prevent the injuries due to the increased use of industrial robots. In the analysis, the injuries occurred during the industrial robot operation accounted for 45.9% of the entire accidents. Thus, we examined the present status of the industrial robot operation to analyze the root cause of accidents occurred in our studied time period. We looked at a total of 469 workplaces. 456 workplaces responded in the year 2009 and survey studies were implemented at 13 of the 29 workplaces where work injuries were sustained in the year 2010. Even where protective measures and interlock devices were in place, our studies indicated that workers could access the robot area to perform the tasks in 188 sites(40.1%). Also, the 143 sites(30.5%) had control measures and equipment located in the safety fence. In addition, the robots found at 164 sites(35.0%) could be restarted without additional restarting operation. These three causes accounted for most of the workplace injuries during the industrial robot operations. Futhermore, we confirmed the fact that the protective measures of the current safety regulations were not strictly enforced. Based upon our studies and the investigation of the present status of the industrial robot operation, higher standards in training and supervision of workers in the robot operation must quickly be met in order to prevent these industrial injuries.

• Applied Chemistry for Engineering
• /
• v.35 no.4
• /
• pp.284-295
• /
• 2024

Chemical agents are classified according to their mechanism of toxicity into categories such as nerve agents, choking agents, blood agents, blister agents, etc. Among them, nerve agents cause toxic symptoms by binding with acetylcholinesterase (AChE) in the body, which breaks down neurotransmitters, thus disrupting the autonomic nervous system. In severe cases, this can lead to death, making it a critical chemical agent. Therefore, once it has penetrated into the human body, it is important to detoxify it swiftly. Antidotes used for detoxification include chemical medicines such as pretreatment agents, post-treatment agents, anticonvulsants, and bioscavengers. This review will address the uses, forms, components, and principles of detoxification of nerve agent antidotes and the association with bioscavengers.