• 한국전기전자재료학회논문지
• /
• 제24권4호
• /
• pp.276-279
• /
• 2011

This work, the etching characteristics of $Ba_2Ti_9O_{20}$(BTO) thin films were investigated using an inductively coupled plasma (ICP) of $Ar/Cl_2$ gas mixture. The etch rate of BTO thin films as well as the $BTO/SiO_2$ and BTO/PR etch selectivity were measured as functions of $Ar/Cl_2$ mixing ratio (0~100% Ar) at a constants gas pressure (6 mTorr), total gas flow rate (50 sccm), input power (700 W) and bias power (200 W). The etch rate of BTO thin films decreased with increasing Ar fraction. To analyze the etching mechanism an optical emission spectroscopy (OES), double Langmuir probe(DLP) and surface analysis using X-ray photoelectron spectroscopy (XPS) were carried out.

• 한국전기전자재료학회논문지
• /
• 제24권6호
• /
• pp.445-448
• /
• 2011

In this study, the etching characteristics of $Al_2O_3$ thin films were investigated using an ICP (inductively coupled plasma) of $BCl_3$/Ar gas mixture. The etch rate of $Al_2O_3$ thin films as well as the $SiO_2/Al_2O_3$ etch selectivity were measured as functions of $BCl_3$/Ar mixing ratio (0~100% Ar) at a constant gas pressure (10 mTorr), total gas flow rate (40 sccm), input power (800 W) and bias power (100 W). The behavior of the $Al_2O_3$ etch rate was shown to be quite typical for ion-assisted etch processes with a dominant chemical etch pathway. To analyze the etching mechanism using DLP (double langmuir probe), OES (optical emission spectroscopy) and surface analysis using XPS (x-ray photoelectron spectroscopy) were carried out.

• Transactions on Electrical and Electronic Materials
• /
• 제6권2호
• /
• pp.46-50
• /
• 2005

BST thin films were etched with inductively coupled CF$_{4}$/(Cl$_{2}$+Ar) plasmas. The etch characteristics of BST thin films as a function of CF$_{4}$/(Cl$_{2}$+Ar) gas mixtures were analyzed using optical emission spectroscopy (OES) and Langmuir probe. The BST films in CF$_{4}$/Cl$_{2}$/Ar plasma is mainly etched by the formation of metal chlorides which depends on the emission intensity of the atomic Cl and the bombarding ion energy. The maximum etch rate of the BST thin films was 53.6 nm/min because small addition of CF$_{4}$ to the Cl$_{2}$/Ar mixture increased chemical and physical effect. A more fast etch rate of BST films can be obtained by increasing the DC bias and the RF power, and lowering the working pressure.

• 한국전기전자재료학회논문지
• /
• 제15권12호
• /
• pp.1016-1020
• /
• 2002

Ru thin films were etched using CF/$_4$O$_2$ plasma in an ICP (inductively coupled plasma etching) system. The maximum etch rate of Ru thin films was 168 nm/min at a CF$_4$/O$_2$ gas mixing ratio of 10 %. The selectivity of SiO$_2$ over Ru was 1.3. From the OES (optical emission spectroscopy) analysis, the optical emission intensity of the O radical had a maximum value at 10% CF$_4$ gas concentration and drcrease with further addition of CF4 gas, but etch slope was enhanced. From XPS (x-ray photoelectron spectroscopy) analysis, the surface of the etched Ru thin film in CF$_4$/O$_2$ chemistry shows Ru-F bonds by the chemical reaction of Ru and F. RuF$_{x}$ compounds were suggested as a surface passivation layer that reduces the chemical reactions between Ru and O radicals. From a FE-SEM (field emission scanning electron microscope) micrograph, we had an almost perpendicular taper angle of 89$^{\circ}$.>.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
• /
• pp.22-25
• /
• 2004

In this study, BST thin films were etched with inductively coupled $CF_4/(Cl_2+Ar)$ plasmas. The etch characteristics of BST thin films as a function of $CF_4/(Cl_2+Ar)$ gas mixtures were analyzed using quadrupole mass spectrometry (QMS) and optical emission spectroscopy (OES). The maximum etch rate of the BST thin films was 53.6 nm/min because small addition of $CF_4$ to the $Cl_2/Ar$ mixture increased chemical effect. The optimum condition appears to be under a 10 % $CF_4/(Cl_2+Ar)$ gas mixture in the present work.

• 대한치과기공학회지
• /
• 제43권4호
• /
• pp.145-152
• /
• 2021

Purpose: This study aimed to produce resin prosthetics using a dental barrel finishing machine. For dental resin grinding, the ingredients of the barrel finishing media were analyzed, and surface residues of the resin were observed. Methods: Two types of barrel finishing media for dental resin grinding were tested. Specimens were made from thermal polymerized, auto polymerized, and photopolymerized resins. Finishing media were analyzed through energy-dispersive X-ray spectroscopy (EDS) component analysis and inductively coupled plasma-optical emission spectrometry (ICP-OES) component analysis. Then, the prepared specimen was barrel finished for 25 minutes using two types of barrel finishing media, and scanning electron microscope was photographed to observe the surface residues. Results: As a result of EDS component analysis, both types of finishing media were analyzed for the components of C, O, Zr and Al elements, and industry media (IM) was further analyzed for the components of Si and Mg elements. In the ICP-OES component analysis, Cd and As, which are harmful elements, were detected in IM, and no harmful elements were detected in manufacturing media (MM). Because of observation of surface residues, no residues were observed in the three types of resin specimens that were barrel finished with two types of finishing media. Conclusion: Surface residue wasn't observed on the specimens polished using two types of finishing media. However, in IM, Cd and As, which are harmful elements, were detected, making it inappropriate for clinical use. In MM, harmful elements were not detected; therefore, clinical use will be possible.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.104-104
• /
• 2009

Critical dimensions has rapidly shrunk to increase the degree of integration and to reduce the power consumption. However, it is accompanied with several problems like direct tunneling through the gate insulator layer and the low conductivity characteristic of poly-silicon. To cover these faults, the study of new materials is urgently needed. Recently, high dielectric materials like $Al_2O_3$, $ZrO_2$ and $HfO_2$ are being studied for equivalent oxide thickness (EOT). However, poly-silicon gate is not compatible with high-k materials for gate-insulator. To integrate high-k gate dielectric materials in nano-scale devices, metal gate electrodes are expected to be used in the future. Currently, metal gate electrode materials like TiN, TaN, and WN are being widely studied for next-generation nano-scale devices. The TaN gate electrode for metal/high-k gate stack is compatible with high-k materials. According to this trend, the study about dry etching technology of the TaN film is needed. In this study, we investigated the etch mechanism of the TaN thin film in an inductively coupled plasma (ICP) system with $O_2/BCl_3/Ar$ gas chemistry. The etch rates and selectivities of TaN thin films were investigated in terms of the gas mixing ratio, the RF power, the DC-bias voltage, and the process pressure. The characteristics of the plasma were estimated using optical emission spectroscopy (OES). The surface reactions after etching were investigated using X-ray photoelectron spectroscopy (XPS) and auger electron spectroscopy (AES).

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.198-198
• /
• 2014

Plasma를 이용하는 대면적 디스플레이 공정에서 균일도는 매우 중요한 요소 중 하나이다. 이를 향상시키기 위하여 본 연구에서는 pulsed plasma를 이용하여 duty ratio를 조절함으로써 균일도를 향상시켰으며, plasma on/off time을 이용하여 electron temperature를 낮추어 plasma에 의한 damage를 감소시키려 하였다. 또한 optical emission spectroscopy(OES)를 이용하여 pulse condition에따라 변하는 ion species peak을 실시간으로 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.197-200
• /
• 2001

Novel Enhanced Inductively Coupled Plasma is applied to etch $SiO_2$. Effect of $O_2$ or Ar addition to $C_{4}F_{8}$ gas is monitored by Optical Emission Spectroscopy and Quadrupole Mass Spectrometer. It is fund that Ar or $O_2$ dilution to $C_{4}F_{8}$ increases F emission intensity and decreases $CF_2$ intensity. However, the ac frequency to the Helmholtz coil decreases the F intensity and thus increases $CF_2$/F ratio. By adjusting the ac frequency, the optimum etch rate and PR to $SiO_2$ selectivity can be obtained in E-lCP.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.126-126
• /
• 2009

Noninvasive plasma diagnostic technique is introduced to analyze and characterize HICP (Helmholtz Inductively Coupled Plasma) source during the plasma etching process. The HICP reactor generates plasma mainly through RF source power at 13.56MHz RF power and RF bias power of 12.56MHz is applied to the cathode to independently control ion density and ion energy. For noninvasive sensors, the RF sensor and the OES (Optical emission spectroscopy) were employed since it is possible to obtain both physical and chemical properties of the reactor with plasma etching. The plasma impedance and optical spectra were observed while altering process parameters such as pressure, gas flow, source and bias power during the poly silicon etching process. In this experiment, we have found that data measured from these noninvasive sensors can be correlated to etch results. In this paper, we discuss the relationship between process parameters and the measurement data from RF sensor and OES such as plasma impedance and optical spectra and using these relationships to analyze and characterize H-ICP source.