• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.813-823
• /
• 2023

In this study, microstructure, hardening layer hardness, and case depth were evaluated after induction hardening(IH) of base metal specimen(BM) treated with annealing and quenching-tempering specimen(QT) treated with quenching and tempering. The microstructure after IH was significantly influenced by the microstructure before IH and the induction coil heating movement speed, but the effect of the induction frequency was very small. The hardness of the hardened layer at an induction coil heating movement speed of 15 mm/s or less was more influenced by the microstructure before IH than the induction coil travel speed and induction frequency. The induction coil travel speed has the significantly effect on the case depth, the induction frequency has effect and the microstructure before IH has a small effect.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2006년도 춘계학술대회
• /
• pp.359-364
• /
• 2006

This document analyses the empirical study result of the safety quality management system(SQMS) induction. This analysis is composed as the following. First of all, we take a brief look at (he present Korean situations after the SQMS induction. Next, we analyse the effect of the SQMS induction, then we indicate the conclusion, suggestion, limits and future course of this study. We divided the effect of induction in 21 factors. The result was 3.5 out of 5 perfect Points, which shows the high preference. Higher points were scored with international companies than domestic ones, the companies accepted before 1998 than the ones after 1998, and large enterprises than smaller ones.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.276-281
• /
• 2010

In this paper, an electromagnetic induction on a telecommunication line by the distribution line of a power provision system or a feeder line of an electrified railway system has been verified through experiments. The basic cause of induction occurrence by these practical power provision systems is the returning current through the earth. This principle has been confirmed by the experiments documented in this paper which implemented these mechanisms to incur an induction. Experimental methods were used to produce the returning current through the earth. The experiment to find a relationship between inducing strength and the distance between the two phase lines in a power provision line has also been included to confirm that, when the distance is enlarged, the induction effect increases as the cross-nullification effect of magnetic fluxes decreases. An experiment for the existence of a shielding effect by another conduction length material has been addedas a protection measure against the induction.

• 한국정밀공학회지
• /
• 제23권5호
• /
• pp.128-136
• /
• 2006

To predict the noise and vibration characteristics of induction motor system, it is necessary to develop the mathematical model including all the mechanical elements such as shaft, blower, rotor, fan, bearing, case and mounting parts. Coupling effect between case-mount system and rotor- shaft system including shaft, blower, rotor, fan and bearing is examined. Impact exciting experimentation was done in order to verify vibration model of the induction motor system. From experimental results, we can appreciate that the natural frequencies of induction motor system are in good agrements with analysis.

• 조명전기설비학회논문지
• /
• 제18권3호
• /
• pp.90-94
• /
• 2004

본 논문에서는 고주파 공진형 인버터를 이용하여 유도가열(Induction Heating)용 고주파 공진형 인버터와 고주파로 인한 표피효과(Skin effect)에 관하여 설명하였다. 그리고 실험기구를 제작하여 상자성체의 대표적 금속인 알루미늄을 사용하여 유도가열과 표피효과의 현상을 확인하였으며, 알루미늄 박판 가열의 가능성과 활용방안에 대하여 제안하였다.

• 전력전자학회논문지
• /
• 제11권3호
• /
• pp.266-273
• /
• 2006

선형유도전동기의 순시 속도에서의 1,2차 상대 위치이동으로 나타나는 동 특성과 이 때의 단부효과를 고려한 등가회로 해석방법을 이용하여 시스템을 모델링하고 SVPWM 구동시스템에 적용한 정속도 제어 특성을 부하조건에 따른 동작특성으로 시뮬레이션하여 SVPWM 구동 편측형 선형유도전동기시스템에 적용가능성을 입증하였다.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.103-107
• /
• 2016

In general, the voltage stability of induction generator is lower than synchronous generator. Induction generator has a number of advantages over the synchronous generator on the side of price and maintenance. So Induction generator has been applied to the small hydroelectric power of low output. Induction generator usually generates a high current during grid connection. The high current that occurs during grid connection can cause a voltage drop in the system. In order to increase the supply of the induction generator, it is necessary to propose a method of reducing high current. This paper proposes some method of the soft start to reduce voltage drop caused by the large starting current. soft-start method has high voltage drop effect than direct start method, control of firing angle can be increased the voltage drop effect.

• 전기의세계
• /
• 제21권4호
• /
• pp.7-14
• /
• 1972

The author has established a general equation for the travelling magnetic field in air gap with the end effect taken into consideration, which constitutes the basics for the analysis of characteristics of linear induction motor. This equation is verified by comparison of the experimental values with the theoretically calculated values. The properties of the travelling wave with attenuation, which is contained in the travelling magnetic field of linear induction motor, have been verified, and consequently the practicable equation is established with these effects taken into consideration. This provides the solid foundation for the theoretical analysis of the characteristics of the linear induction motor.

• 제어로봇시스템학회논문지
• /
• 제20권6호
• /
• pp.635-640
• /
• 2014

Detection and diagnosis of incipient bearing fault in an induction motor is important for the prevention of serious motor failure. This paper presents an analysis of the effect of a faulty bearing on the stator current of an induction motor. A bearing fault leads to torque oscillations which result in phase modulation of the stator current. Since the torque oscillations cause specific frequency components at the stator current spectrum to rise sharply, the bearing fault can be detected by checking out the faultrelated frequency. In this paper, a mathematical model of the load torque oscillation caused by a bearing fault is presented. The proposed model can be used to analyze the physical phenomenon of a bearing fault in an induction motor. In order to represent the bearing fault effect, the proposed model is combined with an existing model of vector-controlled induction motors. A set of simulation results demonstrate the effectiveness of the proposed model and represent that bearing fault detection using a stator current is useful for vector-controlled induction motors.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.399-403
• /
• 2005

In this paper, we analyze on the effect of RC filter to mitigate transient overvoltage on the high voltage induction motor fed by H-bridge cascaded 7-level inverter. The switching surge voltage becomes the major cause to occur the insulation failure by serious voltage stress in the stator winding of high voltage induction motor. The effect of switching surge appears more serious in high voltage induction motor than low voltage induction motor. Consequently, we demonstrated that the RC filter connected to the motor terminals greatly reduces the transient voltage stress md ringing. The results of simulation show the suppression of transient overvoltage at the motor end of a long cable. using EMTP