• 전기학회논문지
• /
• 제59권4호
• /
• pp.722-727
• /
• 2010

This paper presents Dynamic-Simulation to estimate the inductance of a permanent magnet type transverse flux rotating motor by applying the real-time parameter estimation theory. As transverse flux rotating motor has the complex structure, it can be happen to some errors between real value and designed one with respect to the inductance. To reduce this kinds of errors, the real-time parameter estimation theory was applied to dynamic-simulation. And then, By comparing the estimated inductance and designed one, it is realized that the real-time parameter estimation theory can be applied in the permanent magnet type transverse flux rotating motor.

• 전자공학회논문지
• /
• 제49권9호
• /
• pp.259-269
• /
• 2012

전원 전압이 낮아지고, 칩의 동작 속도가 빨라짐에 따라 온-칩 인덕턴스를 포함한 power distribution network (PDN) 분석이 중요해 질 것으로 예측된다. 본 논문에서는 일반적인 온-칩 전력 격자 구조에 적용시킬 수 있는 효과적인 인덕턴스 추출방법에 대해 제안한다. Chip layout에 적용할 수 있는 loop 인덕턴스 모델을 제시하고, 그 모델을 사용하여 post layout RC extraction netlist로 부터 인덕턴스를 포함한 netlist를 추출할 수 있는 tool을 개발하였다. 제안된 loop 인덕턴스 모델과 개발된 tool의 정확성은 회로 simulation을 통해 PEEC 모델과 비교하여 검증하였다. 인덕턴스 추출 방법을 실제 chip layout에 적용시켜 on-chip inductance를 포함한 PDN의 voltage fluctuation을 예측하였다. 패키지와 PCB 모델을 포함한 co-simulation 모델을 구성하여 on-chip inductance의 영향을 분석하였다.

• 전기학회논문지
• /
• 제61권1호
• /
• pp.34-40
• /
• 2012

Flux linkage of phase windings or phase inductance is an important parameter in determining the behavior of a switched reluctance motor (SRM) [1-8]. Therefore, the accurate prediction of inductance at aligned and unaligned rotor positions makes a significant contribution to the design of an SRM and its analytical approach is not straightforward due to nonlinear flux distribution. Although several different approaches using a finite element analysis (FEA) or curve-fitting tool have been employed to compute phase inductance [2-5], they are not suitable for a simple design procedure because the FEA necessitates a large amount of time in both modeling and solving with complexity for every motor design, and the curve-fitting requires the data of flux linkage from either an experimental test or an FEA simulation. In this paper, phase inductance at aligned and unaligned rotor positions is estimated by means of numerical method and magnetic equivalent circuit as well, and the proposed approach is analytically verified in terms of the accuracy of estimated inductance compared to inductance computed by an FEA simulation.

• 전력전자학회논문지
• /
• 제19권2호
• /
• pp.164-172
• /
• 2014

This paper presents an analysis of a leakage inductance for a toroidal type flyback transformer. The equation to calculate the leakage inductance is derived using the MMF diagram of the transformer. The analysis for the different types of the cores and winding structures is also provided using the FEM simulation. The winding structures minimizing the leakage inductance are finally discussed from the simulation and experimental results.

• 전기학회논문지
• /
• 제61권12호
• /
• pp.1836-1842
• /
• 2012

Torque is proportional to the rate of change of inductance in a switched reluctance motor (SRM), and hence, phase inductance is an important parameter in determining the behavior of an SRM. Therefore, the accurate prediction of inductance with respect to rotor position makes a significant contribution to designing an SRM and its analytical approach is not straightforward due to nonlinear flux distribution. Although several different approaches using a finite element analysis (FEA) or curve-fitting tool have been employed to compute phase inductance [2-5], they are not suitable for a simple design procedure because the FEA necessitates a large amount of time in both modeling and solving with complexity for every motor design, and the curve-fitting requires the data of flux linkage from either an experimental test or an FEA simulation. In this paper, phase inductance is predicted by means of a permeance method, and the proposed approach is analytically verified in terms of the accuracy of estimated inductance compared to inductance obtained by FEA.

• 대한전자공학회논문지
• /
• 제11권4호
• /
• pp.19-24
• /
• 1974

LC ladder형의 여파회로등에 필요한 비접지 inductance를 유도소자없이 구성하기 위하여 2개의 연산증폭기와 수동소자를 쓰는 방식을 제시하였다. Indefinite admittance matrix를 써서 이 회로강이 가등적으로 병렬로 정과 부의 저항과 직렬로 순 inductance가 있는 π형회로임을 증명하였고, 실제로 low-pass 여파회로의 구성에 응용하여 얻어진 주파수특성이 만족할만함을 보였다. 이 방법에 의한 비접지 inductance는 지금까지 발표된 방법과 비교할 때 실현된 inductance에 직렬저항성분이 없음으로 Q가 높아서 유리하다. 또한 소요된 연산증폭기의 수도 적다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.311-313
• /
• 1996

In case of field weakening region, the dynamic behavior of the speed controller depends on the rotor flux level. In this region, the flux is decreased inversely proportional to the rotor speed. As the rotor flux is decreased, as the magnetizing inductance is increased. In this paper, the effect of this increased magnetizing inductance to the performance of vector control is illustrated. The stationary reference frame torque not including the magnetizing inductance is calculated by stationary stator flux, and the rotating reference frame torque including the magnetizing inductance is calculated by rotating rotor flux. If the magnetizing inductance value is constant, two torque values are same regardless of the flux-component current. However, if the magnetizing inductance is varied, those two values are different. The paper presents the new tuning scheme of the magnetizing inductance using the difference between the stationary and rotating torque. Computer simulation demonstrates the efficacy of the proposed scheme.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.423-426
• /
• 2002

This paper presents a new analytical representation and simulation of the phase inductance of a Switched Reluctance Motor(SRM) using Matlab/M-file. This simulation method has many advantages: it is free from expression, can be applied widely, demonstrates inductance profile using motor parameter only, and save run time. Moreover, this simulation method can be easily realize various SRM model unlikely the existing method that limited itself to one model. And analytical expression for inductance profile is welcome as it allows for easier analysis of the motor, for it can bring insight in it working, in formulating control strategies and in achieving high accuracy in performance computations.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 추계학술대회
• /
• pp.49-50
• /
• 2017

In a two-dimensional wireless power transfer system, the mutual inductance angle is the most important parameter for determining the power transmission efficiency. This paper presents a technique to estimate the mutual inductance angle from the voltage and current information of the transmitting (Tx) coils. The equation to estimate the mutual inductance angle is derived, and the validity of the proposed method is verified through simulation and experiment.

• 전력전자학회논문지
• /
• 제4권2호
• /
• pp.209-214
• /
• 1999

본 논문에서는 유도 전동기의 회전자 자속 기준 벡터 제어시 약계자 영역에서의 성능 향상을 위한 유도 전동기 인덕턴스 성분들의 변동에 대한 새로운 온라인 추정 방법을 제시한다. 역기전력을 적분하여 얻는 고정자 자속과 고정자 전류를 이용하여 고정자 과도 인덕턴스와 고정자 자기 인덕턴스를 추정하며, 추정된 고정자 자기 인덕턴스 값에서 자화 인덕턴스를 추정하고, 추정된 고정자과도 인덕턴스 값에서 회전자 누설 인덕턴스를 추정한다. 온라인 동조를 위해 비례 적분 제어기를 사용한다. 제안한 방법으로 시뮬레이션과 실험을 수행하여 제안한 방법의 효과와 타당성을 증명한다.