• 한국초전도ㆍ저온공학회논문지
• /
• 제10권1호
• /
• pp.28-31
• /
• 2008

22.9kV 50MVA HTS power cable has been developed and tested by Korea Electrotechnology Research Institute and LS Cable Company and it was supported by a grant from Center for Applied Superconductivity Technology of the 21st Century Frontier R&D Program. In this paper, DC Ic of 100m HTS cable which is installed at Kochang testing station was measured and analyzed. A measurement technique of DC Ic used by resistance and inductance removal method is established.

• 전력전자학회논문지
• /
• 제15권3호
• /
• pp.226-234
• /
• 2010

본 논문은 실제적인 변압기 운전환경에서 변화하는 승압형 인덕턴스를 실시간으로 추정하여 그 값을 통해 이득값을 계산하는 전향제어기를 제안하였다. 승압형 인덕턴스는 입력 전류의 변화분과 입력 교류 전압의 측정치만을 이용하여 추정되고, 그 값은 최소자승법을 적용하여 최적화 된다. 제안된 전향제어기는 변압기 운전 환경의 변화에도 강인한 제어가 가능하며, 입력 전류의 고조파 성분을 감소시켜 간섭현상에 따른 성능 저하를 최소화 할 수 있다. 제안된 기법의 타당성은 시뮬레이션과 실험 결과를 통해 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.131-134
• /
• 2001

The accurate identification of the motor parameters is crucially important to achieve high dynamic performance of induction motors. In this paper, the motor parameters such as rotor resistance, stator(rotor) leakage inductance, mutual inductance are measured for torque monitoring and indirect vector control. To demonstrate the practical significance of the results, some experimental results are presented.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.645-648
• /
• 1998

We used a three-dimensional inductance extraction program, Fasthenry for optimal design of the spiral inductors on silicon substrate. The inductance and quality factor of the spiral inductors with various design parameters were calculated so that the optimal parameter value was determined. The spiral inductors then were fabricated using different foundary processes and were measured using the network analyzer and microwave probes. The pad and other parasitics of measurement system were de-embedded using the y-parameter calibration technique. the inductors fabricated using the LG 0.8um process and HP 0.5um process showed the quality factor of 5.8 and 3, respectively. Finally the equivalent circuit farameters of the spiral inductors on silicon substrate were extracted from the measurement data using the matlab.

• 전기학회논문지
• /
• 제58권5호
• /
• pp.923-928
• /
• 2009

The performance analysis and robust control of the interior permanent magnet synchronous motor(IPMSM) greatly depend on accurate value of its parameters. To achieve the high performance of torque control, it is necessary to consider exact inductance values because the inductances are nonlinear parameters of operating the IPMSM. Therefore many different methods have been performed for analysis of the methodology for the exact measurement of synchronous inductances. None of them is considered standard, and accuracy levels of all these methods are also not consistent. Among these experimental methods, the DC current decay test and the vector current control test are ideal for a laboratory environment. In this paper, these two test methods are compared by applying inductances to the IPMSM. The paper analyzes the measured inductances of the two methods and their differences with inductances obtained from the finite element method(FEM).

• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.111-120
• /
• 1996

In this paper, we proposed an inductance loaded small type open-loop travelling wave antenna model for the suitable VHF/UHF frequency bands moisture measurement systems and analyzed its operating characteristics by galerkin's solution method. This antenna model enables to change the oeprating rsonance frequency from the frequency range 150 Mhz to 1.0 Ghz without changing the antenna design dimensions by only varing the load inductance values and it showed the similar operating charcteristics and narrowband resonance characteristics at each resonance frequencies. Also this model showed the uniformly distriubte dpower radiation characteristics above the loop axis and it can effectively suppress the spurious radiations from its narrowband resonance characteristics.

• 전력전자학회논문지
• /
• 제8권5호
• /
• pp.427-434
• /
• 2003

본 논문은 스위치드 릴럭턴스 전동기(SRM)에서 회전자위치검출의 새로운 방법을 다루었다. 전동기에 대한 센서리스방식의 제어기법들은 상전류의 측정과 비여자 구간에서의 펄스전압인가를 포함하고 있다. 회전자의 위치를 추정 할 수 있는 윈리는 펄스 전류를 통한 인턱턴스의 검출을 기포로 한다. 이 센서리스 제어법은 회전자의 위치검출 연산이 매우 간단하여 전속도구간에서 운전이 가능하여 드라이브 시스템을 효율적으로 구성할 수 있다. 제안한 방식을 이용하여 구동시스템을 구성하고 실험을 통하여 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.11-13
• /
• 2005

An interior permanent magnet synchronous motor (IPMSM) is receiving increased attention for many industrial applications because of its high torque to inertia ratio, superior power density, and high efficiency. IPMSM is necessary to use the accurate information of the inductance for the precise torque control owing to the reluctance torque. This paper presents two method to measure the each-axis Inductance. The first method uses the peak current that is measured by applying the pulsewise voltage on the each position of IPMSM. The second uses the hysteresis loop of the flux and current measured by applying the positive and negative pulsewise voltage alternately on the each-axis.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.523-525
• /
• 2004

This paper describes a new method of detecting rotor position in switched reluctance motor(SRM). Some strategies of position sensorless control methods for the motor include the measurement of phase current and applied pulse voltage in an unexcited phase. The principle of the estimation of a rotor position is based on the detection of inductance by pulse currents. Suggested method is verified by some experimental tests.

• 한국전자통신학회논문지
• /
• 제18권4호
• /
• pp.625-640
• /
• 2023

본 논문에서는 IoT 응용에서 사용되는 인덕티브한 센서의 인덕턴스를 측정할 수 있는 회로를 제안하였다. RL 저역 통과 필터 회로, 비교기, 전류 제어 스위치, 커패시터의 특성을 이용하여 회로를 구성하였으며, RL 저역 통과 필터 회로의 출력 전압이 기준 전압보다 큰 duration time을 통해 1nH-1H 범위 내의 인덕턴스 값을 도출 할 수 있다.