• Journal of Bio-Environment Control
• /
• v.25 no.3
• /
• pp.218-223
• /
• 2016

The calculation method of ground heat exchange in greenhouses has different ideas in each design standard, so there is a big difference in each method according to the size of greenhouses, it is necessary to establish a more accurate method that can be applied to the domestic. In order to provide basic data for the formulation of the calculation method of greenhouse heating load, we measured the soil temperature distribution and the soil heat flux in three plastic greenhouses of different size and location during the heating period. And then the calculation methods of ground heat exchange in greenhouses were reviewed. The soil temperature distributions measured in the heating greenhouse were compared with the indoor air temperature, the results showed that soil temperatures were higher than room temperature in the central part of greenhouse, and soil temperatures were lower than room temperature in the side edge of greenhouse. Therefore, it is determined that the ground heat gain in the central part of greenhouse and the perimeter heat loss in the side edge of greenhouse are occurred, there is a difference depending on the size of greenhouse. Introducing the concept of heat loss through the perimeter of building and modified to reflect the size of greenhouse, the calculation method of ground heat exchange in greenhouses is considered appropriate. It was confirmed that the floor heat loss measured by using soil heat flux sensors increased linearly in proportion to the temperature difference between indoor and outdoor. We derived the reference temperature difference which change the direction of ground heat flow and the perimeter heat loss factor from the measured heat flux results. In the heating design of domestic greenhouses, reference temperature differences are proposed to apply $12.5{\sim}15^{\circ}C$ in small greenhouses and around $10^{\circ}C$ in large greenhouses. Perimeter heat loss factors are proposed to apply $2.5{\sim}5.0W{\cdot}m^{-1}{\cdot}K^{-1}$ in small greenhouses and $7.5{\sim}10W{\cdot}m^{-1}{\cdot}K^{-1}$ in large greenhouses as design standard data.

• Korean Journal of Environmental Biology
• /
• v.38 no.3
• /
• pp.404-415
• /
• 2020

We investigated the seasonal variations in growth and physiological responses of the kelp species Ecklonia cava to different nitrogen sources to establish indoor culture conditions for mass production. Ecklonia cava was cultivated for 10 days in 16 combinations of seawater temperatures (15, 17, 21, and 25℃) and different nitrogen sources (control; NH-NH₄⁺ 100 μM; NO-NO₃^- 100 μM; and NHNO-NH₄⁺ 50 μM+NO₃^- 50 μM). The growth and growth rate of the blade were affected by temperature. The mean fresh weight and area-based daily growth rate were the highest (5.8±0.5 and 6.6±0.5% day^-1, respectively) at 15℃ and the lowest (2.2±0.2 and 3.0±0.3% day^-1, respectively) at 25℃. The daily growth rate was the highest in the NH and NO treatments and lowest in the control. The nitrate reductase activity of E. cava varied with water temperature (season). The highest activity was in the control (1.32±0.10 μmol NO₂^- g^-1 dry weight h^-1) and the lowest was in the NH treatment (0.25±0.02 μmol NO₂^- g^-1 dry weight h^-1). The photosynthetic pigment concentrations reached a maximum value in the NHNO treatment and a minimum value in the control. These results showed that water temperature played an important role in the cultivation of E. cava and that a single supply of NH₄⁺ or NO₃^- may induce the accelerated growth of E. cava. The growth and physiological responses of E. cava to different nitrogen sources during each season provide valuable information for determining the optimal nitrogen source in E. cava cultivation under indoor conditions.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.9
• /
• pp.811-816
• /
• 2009

Along with research into the latest preservation treatments for items of cultural heritage, studies of the preservation environment and the effect of damage are also increasing. This study conducted comprehensive research into the temperature, humidity, acids, ammonia, reduced sulfur compounds, aldehydes with various ingredients in the exhibition hall, show case, and storage of three type museum. As a result, temperature, humidity, TVOCs, acetaldehyde frequently exceeded the domestic and international standards for a museum preservation environment and indoor air quality. Also, formaldehyde, chloride, and ammonia exceeded the standards intermittently. Temperature, humidity, TVOCs, acetaldehyde were evaluated to be the major influential factors. In order to control the major factors, apart from temperature and humidity, that cause damage in the museum environment, it is deemed necessary to complement this system with an effective air filter or remover.

• Journal of Energy Engineering
• /
• v.15 no.3 s.47
• /
• pp.202-208
• /
• 2006

Although the importance of good conservation of historic sites including ancient royal tombs is well aware, still not much attention has been paid for the facilities and systems to preserve those historic sites, which includes precious artifacts as wall paints and carved works, etc. Even the general understanding about the environment of the underground space or tombs is not satisfactory. In the present study, vibration levels due to the operation of an HVAC system to maintain the desired indoor temperature and humidity are investigated experimentally. According to the measured data, the level of vibration inside the present model tomb with the indoor unit inside, showed order of magnitude less values than the Swiss Standards, but still higher than the value suggested by German standards, which is, zero. Further study will be pursued for cases including different ways of installation, because the vibration level depends not only on the system design, but also on the installation methods.

• Journal of Sensor Science and Technology
• /
• v.7 no.5
• /
• pp.327-333
• /
• 1998

A new human sensibility (kansei) meter that can measure human sensibility at the indoor environment is developed in this paper. Four sensors that can measure temperature, humidity, $CO_2$ and $C_4H_{10}$ concentrations are used. Among these sensors, the first three are used to determine the human sensibility. And the last to protect human from the harmful gas. First of all, human sensibilities are defined for each sensor datum, and then those are linearly combined to make a final human sensibility (kansei). The efficiency and usefulness of the meter are verified using a simulator on Windows 95 and a stand-alone system constructed using a microprocessor.

• Journal of Conservation Science
• /
• v.31 no.1
• /
• pp.13-20
• /
• 2015

Surface of the wooden cultural heritage has been protected from moisture by natural oils (such as perilla oil and tung oil), which accelerated degradation. But we can find seldom the research on the processes and performances of oil coatings. In this study, the water resistant performances by wood direction were compared to 3 types of natural oil and 2 types of oil stain, and the effect of additional indoor conditioning and temperature of oil were appraised in longitudinal direction. The natural oils block moisture about 79.2% comparing to the control in longitudinal direction. Especially the tung oil showed the outstanding water resistance about 90.5%. The water resistant performances decreased about 8.8% by additional indoor conditioning for 2 years. Heated oil improved the water resistance about average 5.0%.(Max. 9.6% with linseed oil).

• Journal of Environmental Science International
• /
• v.30 no.2
• /
• pp.161-172
• /
• 2021

This study was initiated to isolate the microorganisms removing phosphorus (P) from domestic sewage and to investigate the effects of environmental factors on the growth and P removal of the isolated bacteria. Microorganisms isolated from the sewage were identified as Chryseobacterium sp., Stenotrophomonas maltophilia, and Bacillus licheniformis. Among them, Bacillus licheniformis was selected as the P removal microorganism. The environmental factors considered in this study included initial phosphorus concentration, temperature, pH, and carbon source. At initial P concentrations of 10, 20, and 30 mg/L, the P removal efficiencies were 100.0%, 84.0%, and 16.5%, respectively. At 20℃, 30℃, and 40℃, the P removal efficiencies were 0%, 75.8%, and 60.6%, respectively. The removal efficiencies of phosphorus according to pH were 1.6%, 91.7%, and 51.1% at pH 5, pH 7, and pH 9, respectively. Using glucose, acetate, and glucose + acetate as carbon sources yielded P removal efficiencies of 80.9%, 33.6%, and 54.1%, respectively. Therefore, the results from the study demonstrated that the P removal efficiencies of Bacillus licheniformis were the highest when the initial P concentration, temperature, pH, and carbon source were 10 mg/L, 30℃, 7, and glucose, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.3
• /
• pp.465-470
• /
• 2017

This paper designs and implements a smart garden system using probabilistic filter algorithm using SLAM that can be used in apartment or veranda. To do this, we used Arduino and environtal sensors, which are open hardware controllers, and designed to control and observe automatic water supply, lighting, and growth monitoring with three wireless systems (Bluetooth, Ethernet, WiFi). This system has been developed to make it possible to use it in an indoor space such as an apartment, rather than a large-scale cultivation system such as a conventional plant factory which has already been widely used. The developed system collects environmental data by using soil sensor, illuminance sensor, humidity sensor and temperature sensor as well as control through smartphone app, analyzes the collected data, and controls water pump, LED lamp, air ventilation fan and so on. As a wireless remote control method, we implemented Bluetooth, Ethernet and WiFi. Finally, it is designed for users to enable remote control and monitoring when the user is not in the house.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.7
• /
• pp.1156-1166
• /
• 2020

Objective: The aim of this study was to evaluate the effects of compound organic acid calcium (COAC) on growth performance, hepatic antioxidant status and intestinal barrier of male broilers under high ambient temperature (32.7℃). Methods: Nine hundred healthy one-d-old Cobb-500 male broiler chicks were randomly assigned into three groups with six replicates of 50 birds each. A basal diet supplemented with 0% (control), 0.4% and 0.8% COAC, respectively were fed to birds for 6 weeks. All treatments were under high ambient indoor temperature of 32.7℃, and had a constant calcium and available phosphorus ratio. Results: The results showed that, compared with control, the average daily gain of broilers in 0.4% and 0.8% was significantly increased and the ratio of feed to gain in in 0.4% and 0.8% was significantly decreased at 1 to 21, 22 to 42 and 1 to 42 days of age (p<0.05). Compared with control, 0.8% COAC slightly decreased (p = 0.093) the content of malondialdehyde in liver at 42 days of age while 0.4% COAC significantly decreased (p<0.05) the activity of alkaline phosphatase. Furthermore, 0.4% COAC significantly enhanced the intestinal barrier function via increasing jejunal and ileal ocln transcription, promoting jejunal mucin 2 transcription at 42 days of age (p<0.05), and decreasing jejunal toll-like receptor 2 (TLR-2) and ileal TLR-15, inducible nitric oxide synthase compared with control group (p<0.05). Whereas, no significant differences on the transcription of interleukin-1β in jejunum and ileum were observed among three treatments (p>0.05). Overall, heat stress caused by high natural environment temperature may induce the damage to hepatic antioxidation and intestinal barrier. Conclusion: Dietary inclusion of COAC can improve the tolerance of broilers to thermal environment through the modification of antioxidative parameters in liver and the mRNA expression of genes in intestinal barrier, resulting in an optimal inclusion level of 0.4%.

• Korean Journal of Agricultural Science
• /
• v.47 no.1
• /
• pp.43-58
• /
• 2020

Mulching plastic is used for the purpose of maintaining soil temperature, moisture, and weed and pest prevention in agriculture. Any remaining plastic after use may contaminate the soil and damage crop growth. To solve this problem, mulching plastic wrappers have been studied and developed, but the actual use rate is quite low due to their poor performance and frequent tearing of the plastic on the field. In this study, we developed a tractor attachable mulching plastic wrapper to minimize the tearing of the mulched plastic. The developed mulching plastic wrapper consists of hydraulic motors and pumps, valves, a microcontroller, and sensors. The collecting speed of the plastic mulch was calculated considering the tractor's travel speed and the radius of the collecting drum. A proportional controller was designed to control the rotating speed of the hydraulic motor as the plastic was wound around the collection drum and the radius increased. The performance of an indoor experiment was quite promising because the difference between the collecting speed predicted by the calculation and the actual collecting speed was 2.71 rpm. Based on a field verification test, the speed difference was max. 14.28 rpm; thus, the, proportional integral derivative (PID) controller needs to be considered to control the drum speed precisely. Another issue was found when the soil covered at the edge of the plastic was hardened or the road surface was uneven, the speed control was unstable, and the plastic was torn. In future research, vibrational plows will be equipped to break-up the harden soil for collecting the plastic smoothly.