• 제어로봇시스템학회논문지
• /
• 제19권2호
• /
• pp.146-151
• /
• 2013

With the development of mobile internet, requirements of positioning accuracy for the LBS (Location Based Service) are becoming more and more higher. The LBS is based on the position of each mobile device. So, it requires a proper acquisition of accurate user's indoor position. Thus indoor positioning technology and its accuracy is crucial for various LBS. In general, RSSI (Received Signal Strength Indicator) measurements are used to obtain the position information of mobile unit under WLAN environment. However, indoor positioning error increases as multiple AP's configurations are becoming more complex. To overcome this problem, an enhanced indoor localization method by AP (Access Point) selection criteria adopting DOP (Dilution of Precision) is proposed.

• 제어로봇시스템학회논문지
• /
• 제14권9호
• /
• pp.963-968
• /
• 2008

A new method to deal with GPS indoor positioning by means of time synchronized switching GPS repeater has been developed by authors[1]. But the developed indoor positioning system has problems. Therefore, we proposed a method for indoor positioning using GNSS Repeater-Assisted. To solve the 3-dimensional user's position, the 4 or more retransmission antennas are needed in the previously proposed methods. If a GPS repeater periodically transmits the signal like as pseudollite, the information for assisting an acquisition and tracking can be informed to receiver. Then, the user position can be calculated using the induced weak signal. The advantage of the proposed algorithm is use of only 1 re-transmission antenna because the re-transmitted signal are not used for positioning but used for assisting an acquisition and tracking weak signals induced indoor. We analyze the propose algorithms through the experiment and performed the test of feasibility.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.586-591
• /
• 2015

In recent years, along with the rapid development of LED technology, indoor positioning systems based on visible light communication (VLC) have been researched. In this paper, we propose an accurate indoor positioning method using white-light LEDs and a dual image sensor. Indoor LED lights are located at the ceiling in a room and broadcast information on their positions using VLC technology. A mobile device with a dual image sensor receives LED position information by VLC and estimates its position and azimuth angle. Simulation and experimental results are given to show the performance of the proposed indoor positioning system.

• 한국정보시스템학회지:정보시스템연구
• /
• 제17권1호
• /
• pp.131-153
• /
• 2008

So many location based service systems, including automobile navigation system logistic management, taxi fleet management, and so on, are being used everywhere. However, these are all outdoors. This paper provides a stepping stone for commercial indoor location based services by developing an integrated system of our indoor positioning and map viewer modules. For the indoor positioning, we propose WLAN (Wireless Local Area Network) based EKF (Extended Kalman Filter) which estimates user's current location and tracts user's trace in the sequence of time. Our map viewer renders a map recorded in an Autocad DXF file and provides functions of map manipulation such as zoom-in, zoom-out, and move. We integrate our indoor positioning and map viewer modules and discuss the experimental results of the integrated system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.312-314
• /
• 2005

We have implement indoor positioning system to supply orientation information, We have used ultrasound in indoor positioning system for distance and orientation measurements, then propose a set of methods to calculate orientation from an array of well placed ultrasonic sensors operating in the indoor positioning system, We have design and implement a indoor positioning system using a combination of hardware and software and demonstrate end-to-end functionality of the system, We have implement ZigBee based home automation system using location-aware System.

• 한국컴퓨터정보학회논문지
• /
• 제21권6호
• /
• pp.55-62
• /
• 2016

In this paper, we present indoor positioning technologies using the wireless signal categorizing them into triangulation based, fingerprinting based, and cell ID based technologies. We describe several representative techniques for each of them emphasizing their strengths and weaknesses. We define important performance issues for indoor positioning technologies and analyze recent technologies according to the performance issues. We believe that this paper provide wise view and necessary information for recent indoor positioning technologies using wireless signals.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권5호
• /
• pp.1951-1972
• /
• 2018

Wi-Fi Access Point (AP) optimization approaches are used in indoor positioning systems for signal coverage enhancement, as well as positioning precision improvement. Although the huge power consumption of the AP optimization forms a serious problem due to the signal coverage requirement for large-scale indoor environment, the conventional approaches treat the problem of power consumption independent from the design of indoor positioning systems. This paper proposes a new Fast Water-filling algorithm Group Power Constraint (FWA-GPC) based Wi-Fi AP optimization approach for indoor positioning in which the power consumed by the AP optimization is significantly considered. This paper has three contributions. First, it is not restricted to conventional concept of one AP for one candidate AP location, but considered spare APs once the active APs break off. Second, it utilizes the concept of water-filling model from adaptive channel power allocation to calculate the number of APs for each candidate AP location by maximizing the location fingerprint discrimination. Third, it uses a fast version, namely Fast Water-filling algorithm, to search for the optimal solution efficiently. The experimental results conducted in two typical indoor Wi-Fi environments prove that the proposed FWA-GPC performs better than the conventional AP optimization approaches.

• 동력기계공학회지
• /
• 제17권5호
• /
• pp.100-111
• /
• 2013

Indoor real-time positioning for multiple targets is required to realize human-robot symbiosis. This study firstly presents positioning accuracy on an autonomous mobile robot controlled by 3-D coordinates that is obtained by a real-time indoor positioning system with spread spectrum (SS) ultrasonic signals communicated by code-division multiple access. Although many positioning systems have been investigated, the positioning system with the SS ultrasonic signals can measure identified multiple 3-D positions in every 70 ms with noise tolerance and error within 100 mm. This system is also robust to occlusion and environmental changes. However, thus far, the positioning errors in an autonomous mobile robot, controlled by these systems using the SS ultrasonic signals, have not been evaluated as an experimental study. Therefore, a positioning experiment for trajectory control is conducted using an autonomous mobile robot and our positioning system. The effectiveness of this positioning method for robot self-localization is shown, from this experiment, because the average control error between the target position and the robot's position at 29 mm is obtained.

• 한국멀티미디어학회논문지
• /
• 제15권1호
• /
• pp.71-80
• /
• 2012

위치기반 서비스는 일상생활에서도 널리 이용되는 매우 편리한 서비스임으로 GPS 신호가 잡히지 않는 빌딩, 대형상가, 지하상가와 같은 건물 내부에서도 제공되어야 한다. 이처럼 건물 내부에서 제공되는 위치기반 서비스를 옥내 위치기반 서비스라 하는데, 옥내 위치기반 서비스 개발에 있어서 가장 중요한 기술은 옥내측위이다. 옥내측위 방법 중 가장 범용성이 있는 것은 무선근거리통신망의 공유기 신호를 이용하는 것이다. 한편, 근래에는 웹 서비스가 뛰어난 소프트웨어 재사용 기술로 판명되고 있다. 따라서 옥내측위가 웹 서비스로 프로그램 개발자에게 제공된다면 옥내 위치기반 서비스의 실용화를 크게 촉진할 것이다. 본 논문은 공유기 신호를 이용한 삼각측량 및 K-NN 옥내측위 서비스와 RFID를 이용한 옥내측위 서비스를 제공하는 웹 서비스 구현 사례를 소개한다.

• Spatial Information Research
• /
• 제23권3호
• /
• pp.1-10
• /
• 2015

최근 다양한 센서들의 성능 개선으로 실내측위가 가능해졌다. 하지만 Wi-Fi 라디오 맵을 이용한 실내 측위나 가속도 센서와 디지털 캠퍼스를 이용한 실내 측위는 아직 상당한 오차를 가지고 있어 지금까지의 연구는 실내 측위의 정확성을 높이는 측위 기술에 대해 많이 진행되었다. 하지만 좌표단위가 아닌 방 단위의 정확성을 가진 실내 맵 매칭이 가능하다면 Wi-Fi 라디오 맵, 가속도 센서 기반의 현재 실내측위기술로도 실내 서비스가 가능하다. 이에 본 연구는 방 단위의 정확성을 가지는 실내 맵 매칭을 위해, 실내 네트워크 맵 매칭에 대해 정의하고, 이를 수행하며 생기는 이슈들에 대해 살펴보고, 이를 해결하기 위해 은닉 마르코프 모델을 사용한 방안에 대해 제시한다.