• 대한기계학회논문집A
• /
• 제38권7호
• /
• pp.799-807
• /
• 2014

본 논문에서는 가용공간이 적은 실내에서의 사용을 중점으로 한 새로운 방식의 구동방식을 갖는 전동 볼체어의 개발을 소개하고자 한다. 볼체어의 가장 큰 특징은 크게 두 가지로 나뉜다. 첫째는, 구조적 특징으로서 부피와 무게를 최소화하기 위해 원형에 가까운 모양의 팔각형 외골격 프레임 설계를 수행하였고, 공을 포함한 모든 구동부가 로봇 내부에 장착되어 크기뿐만 아니라 사용안전성 면에서 실내용으로 적합하도록 설계하였다. 둘째는, 구동 메커니즘의 특징으로서 볼마우스의 동작 원리를 역발상하여 로봇의 구동방식에 적용하였다. x축, y축의 회전을 담당하는 두 개의 옴니휠이 공을 굴리는 방식으로 각각 모터의 속도를 제어하여 두 개의 바퀴만으로 전 방향 구동이 가능한 홀로노믹 시스템을 구현하였다. 이러한 두 가지의 특징으로부터 볼체어가 좁은 이동 공간에서 전방위 이동을 효과적으로 수행할 수 있음을 실험적으로 구현하였으며, 본 로봇의 자세한 개발 과정을 본 논문에 서술하였다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.79-80
• /
• 2003

In order to develop an indoor assistive mobility equipment, we paid attention to the mechanism of locomotion in a snail, or a terrestrial gastropod molluscs. It is known that the snail moves by propagation of a pedal wave generating on a pedal surface of the snail and a pedal locomotion has flexibility far ground condition. An air mattress with a function of a pedal-like locomotion mechanism was developed and the performance of the pedal locomotory air mattress as mobility equipment was discussed.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1989년도 춘계학술대회
• /
• pp.77-80
• /
• 1989

This paper describes a study on the locomotion control system for a indoor-use mobile wheelchair. Three lode of operations - BASIC, AUTOMATIC and PROGRAMMED - are employed as basic algorithm building block. One-chip microcomputer 8031 is dominating the control of actuation part and it can control the range of rotating speed of the wheel both right and left by servo motor. Keyboard is employed as a command input device. This system is intended to improve the daily life of the disabled by the intelligent interactive operation scheme.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.463-466
• /
• 2004

This paper describes an image processing algorithm for recognition of small-obstacles using a camera and program for a mobile robot in indoor environment. Mobile robot could meet small-obstacles such as a small plastic bottle of about 1l in quantity, a small box of 7$\times$7$\times$7 cm$^3$ in volume, and so on in its designated path, and could be disturbed by them in the locomotion of a mobile robot. So, it is necessary to research on the image processing algorithm for recognition of small-obstacles using a camera and program. In this paper, 2-D the image processing algorithm for recognition of small-obstacles using a camera and program for a mobile robot in indoor environment was developed. The characteristic test of the developed program to confirm the recognition of small-obstacles was performed. It is shown that the developed program could recognize small-obstacles accurately.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2004년도 춘계학술발표대회 논문집
• /
• pp.176-179
• /
• 2004

Space is comprised by the movements of human beings, and draws a complex locus within it. That form seems to be complex of movement around in all directions of space axis, and be ever-changing process as time goes by. Although Human are able to move uninhibitedly, the movements are restricted to a narrow sphere during locomotion. However, the pattern of these movements delineates a certain frame within the space, and provides not only visual effects but also relevance tomovement itself. Also, critically dividing and organizing this sphere is what is realized into this tangible indoor space. This study recognized importance of human being as a core of making indoor space and brought out experimental approach on relationship human with space, and visually perceptual standpoint. And this presented the recent possibility of action and attitude though sight and walking by arranging space on the basis of modern artists' perception of human body.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.85-92
• /
• 2005

This paper describes the recognition method of small-obstacles using a camera for a mobile robot in indoor environment. The technique of image processing using a camera has been widely used for an automaton of industrial system, an inspection of inferior goods, a lookout of an invader, and a vision sensor of intelligent robot. Mobile robot could meet small-obstacles such as a small plastic bottle of about 0.5 l in quantity, a small box of $7{\times}7{\times}7cm^3$ in volume, and so on in its designated path, and could be disturbed by them in the locomotion of a mobile robot. So, it is necessary to research on the recognition of small-obstacles using a camera and program. In this paper, 2-D image processing algorism and method fur recognition of small-obstacles using a camera for a mobile robot in indoor environment was developed. The characteristic test of the developed program to confirm the recognition of small-obstacles was performed. It is shown that the developed program could judge the size and the position of small-obstacles accurately.

• 센서학회지
• /
• 제14권2호
• /
• pp.101-108
• /
• 2005

The research on the avoidance of the large-obstacles such as a wall, a large box, etc. using ultrasonic sensors has been generally progressed up to now. But the mobile robot could meet a small-obstacle such as a small plastic bottle, a small sphere, and so on in its designated path, and could be disturbed by them in the locomotion of the mobile robot. So, it is necessary to research on the avoidance of a small-obstacle. In this paper, a robot's small-obstacle perceiving system was designed and fabricated by arranging four ultrasonic sensors on the plastic plate to avoid small-obstacles. The system was installed on the upper part of the mobile robot with the slope angles between $40.7^{\circ}$ and $23.3^{\circ}$ to a horizontal line and the dynamic characteristic test of the robot was performed. As the result, it was confirmed that the mobile robot with the system could avoid small-obstacles in indoor environment safely.

• 대한의용생체공학회:의공학회지
• /
• 제15권2호
• /
• pp.209-216
• /
• 1994

The objective of the research reported in this paper is to design locomotion system of the motorized wheelchair, to develope the wall following algorithm. The indoor navigation of a motorized wheelchair can be based on the wall following techniques. In this paper, it is proposed to enhance stability and efficiency using the 3 ultrasonic sensors arranged at a same perpendicular pivot. Using this method, the angle between the motorized wheelchair and the wall is detected and the range of control commands has been increased. For the better stability, the calculated slope of a wall using LSLF algorithm was fed back to the control part. By adapting the suggested algorithm and method, the motorized wheelchair could follow a wall in 4 seconds, for a change of distance between the wheelchair and wall from 30 to 100cm.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.21-24
• /
• 2004

This paper describes a perception of small-obstacle using ultrasonic sensors in a mobile robot. The research on the avoidance of the large-obstacles such as a wall, a large box, etc. using ultrasonic sensors has been generally progressed up to now. But the mobile robot could meet a small-obstacle such as a small plastic bottle of about 1 l in quantity, a small box of 7${\times}$7${\times}$7 cm3 in volume, and so on in its designated path, and could be disturbed by them in the locomotion of the mobile robot. So, it is necessary to research on the avoidance of a small-obstacle. In this paper, the small-obstacle perceiving system was designed and fabricated by arranging four ultrasonic sensors on the plastic plate to avoid a small-obstacle. The small-obstacle perceiving system was installed on the above part of the mobile robot with the slope of 40.7$^{\circ}$ to a horizontal line. The static characteristic test and the dynamic characteristic test were performed to know the information of the used ultrasonic sensors. As a result, the mobile robot with the small-obstacle perceiving system could avoid a small-obstacle, and could move in indoor environment safely.

• 전기학회논문지
• /
• 제56권5호
• /
• pp.990-992
• /
• 2007

The purpose of this study is to develop a practical gait-event detection system which is necessary for the FES (functional electrical stimulation) control of locomotion in paralyzed patients. The system is comprised of a sensor board and an event recognition algorithm. We focused on the practicality improvement of the system through 1) using accelerometer to get the angle of shank and dispensing with the foot-switches having limitation in indoor or barefoot usage and 2) using a rule-base instead of threshold to determine the heel-off/heel-strike events corresponding the stimulation on/off timing. The sensor signals are transmitted through RF communication and gait-events was detected using the peaks in shank angle. The system could detect two critical gait-events in all five paralyzed patients. The standard deviation of the gait events time from the peaks were smaller when 1.5Hz cutoff frequency was used in the derivation of the shank angle from the acceleration signals.