• Microbiology and Biotechnology Letters
• /
• v.14 no.2
• /
• pp.175-179
• /
• 1986

In order to develope a protoplast fusion of the genus Cellulomonas having high assimilibility of cellulose, the optimum conditions for the protoplast formation of Cellulomonas flavigena NCIB 12901 was investigated and observed by means of Scanning Electron Microscope. The results suggested that the susceptibility of the cell wall by lysozyme treatment on protoplast formation was considerably depend on the cultural periods of the cells. Cells of C. flavigena at mid exponential phase could more efficiently convert to protoplast cells than those at late exponential phase did. The rate of the protoplast formation was 95%, even though the rate was over 99.9% on counting by indirect method after osmotic shock treatment, when cells of the organism at mid exponential phase were treated with lysozyme (400$\mu\textrm{g}$/$m{\ell}$) for 6 hours and observed by SEM. In the evaluation of protoplast formation of the genus Cellulomonas, direct method of the observation under Scanning Electron Microscope was much more reliable than the counting method of protplasts after osmotic shock treatment. Because defferences between the number of spheroplast and protoplast were not able to be figured out on counting the number of protoplast after osmotic shock treatment.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.145-150
• /
• 2005

To dispose of radwaste in a repository, the safety of disposal must be ensured. This study developed a program for estimating radionuclide accumulation of radwaste, based on the material balance method, one of the indirect methods, and performed application evaluation during the 9th preventive maintenance period of Gori Plant 4, one of the commercial power plants in Korea. First of all, to ensure the technique developed in this study is assessed accurately, this study utilized the data regarding the radionuclide removal in the purification system during the shutdown water chemistry control, and a related estimation technique called SCALP. The target nuclide was Co-60, and it turned out that the relative error was less than $1\%$. The estimation result was compared with the result of direct measurement of the radwaste during the corresponding period as presented by commercial power plants. The result showed that the quantity of Co-60 measured by the direct method was about $50\%$ less than that calculated by the technique developed in this study.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.24 no.5
• /
• pp.233-241
• /
• 2020

This paper is to investigate the retrofitting effect for a non-seismic reinforced concrete frame strengthened by perimeter steel moment frames with indirect integrity, which ameliorates the problems of the direct integrity method. To achieve this, first, full-scale tests were conducted to address the structural behavior of a two-story non-seismic reinforced concrete frame and a strengthened frame. The non-seismic frame showed a maximum strength of 185 kN because the flexural-shear failure at the bottom end of columns on the first floor was governed, and shear cracks were concentrated at the beam-column joints on the second floor. The strengthened frame possessed a maximum strength of 338 kN, which is more than 1.8 times that of the non-seismic specimen. A considerable decrease in the quantity of cracks for the strengthened frame was observed compared with the non-seismic frame, while there was the obvious appearance of the failure pattern due to the shear crack. The lateral-resisting capacity for the non-seismic bare frame and the strengthened frame may be determined per the specified shear strength of the reinforced columns in accordance with the distance to a critical section. The effective depth of the column may be referred to as the longitudinal length from the border between the column and the foundation. The lateral-resisting capacity for the non-seismic bare frame and the strengthened frame may be reasonably determined per the specified shear strength of the reinforced columns in accordance with the distance to a critical section. The effective depth of the column may be referred to as the longitudinal length from the border between the column and the foundation. The proposed method had an error of about 2.2% for the non-seismic details and about 4.4% for the strengthened frame based on the closed results versus the experimental results.

• Journal of the Korean Institute of Gas
• /
• v.18 no.5
• /
• pp.12-19
• /
• 2014

To minimize the risk of corrosion on buried pipeline and to maximize the efficiency of cathodic protection, various indirect inspection techniques have been used for decades. In the United States, 49 CFR has regulated the external corrosion direct assessment for buried pipelines. In Korea, there is no provision for external corrosion direct assessment but there is only, according to the KGS Code, provision that if the survey of the defects of buried pipeline and the leakage test for the pipe were conducted, it is deemed to leakage inspection. We, therefore, have suggested external corrosion direct assessment method appropriate to domestic status through the survey of the regulations and standards of UK and the USA and the investigation of domestic situation on coating damage detection method. The proposed external corrosion direct evaluation method was used as the basis when introducing the precision safety diagnosis regulation for the medium-pressure pipe in Korea.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.245-251
• /
• 2018

Recently, as the importance of structural maintenance has been increased, studies on self - healing concrete technology are being actively carried out. On the other hand, test for evaluating the self-healing performance is not standardized yet. Although visual test is used as a basic method for measuring crack widths, it is difficult to observe the crack width inside the specimen, and there is a disadvantage that only the local measurement of the surface can be measured due to the inhomogeneous cracking characteristics. Although permeability test has been widely used as an indirect method for measuring crack width, there is a problem due to the viscosity of water, and also a possibility that the internal material of the specimen may be eluted during the test. In this study, we propose a crack width evaluation method using gas diffusion characteristics. Idealized straight cracks were fabricated by acrylic and the diffusion coefficients of specimens were analyzed with respect to crack width and thickness. The experimental results show that the crack width and the diffusion coefficient are in a linear relationship and that the thickness and diffusion coefficient are inversely related.

• Membrane Journal
• /
• v.27 no.3
• /
• pp.248-254
• /
• 2017

In order to secure the reliability of pathogenic microorganisms such as Cryptosporidium and Giaridia, which are chlorophilic protozoans, membrane filtration systems have been widely used in water purification process. hese integrity tests are classified into direct and indirect methods. Based on the bubble point theory, the pressure-based test in the direct method is presented in the USEPA Guidance Manual with sensitivity to detect a minimum size of pathogenic microorganisms of $3{\mu}m$ or more. Indirect methods are widely used in that they are capable of continuous operation in on-line state, but there is a very low sensitivity of damage detection compared to the direct method, and there is a limit that can not specify the damage area, so it is necessary to improve this sensitivity. In this study, we compared the LRVDIT and UCL values according to the type of membrane defect, number of fiber breaks, and initial set pressure value through the Integrity Test by Pressure Decay Test (PDT).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.2
• /
• pp.138-141
• /
• 2006

Introduction : In recent years, vascularized, i.e., living bone grafts, have been widely applied in the field of oral and maxillofacial surgery, as a method of treatment of congenital or acquired non-unions, and a large defects in mandible. The vascularized fibular graft has been especially used for this purpose because of its shape and mechanical strength. The postoperative hypertrophy of grafted fibula is of particular interest to us. Material and methods : This study was undertaken to determine the volume change(indirect methods) and radiographic appearance of a free vascularized fibular graft as it responds to the mechanical and physiologic features of its new environment. In order to elucidate the long term effect on fibular mass after mandibular reconstruction, change in various method of volume change was utilized as indirect measure of change in long-term. Results : The younger the patient, the more prominent and rapid the hypertrophy of the graft. the hypertrophy of the graft never exceeded the diameter of the recipient bone, except for callus enlargement after stress fracture of the grafted bone. Conclusion : Etiologic explanations for this phenomenon have not been clarified in the previeous literature. some of the factors implicated include a periosteal reaction or new bone formation, as seen at the onset of bone union after a fracture in a child, a reaction to the mechanical loading on the graft and a reaction to the circulatory changes resulting from the grafting procedure.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.787-801
• /
• 2006

Focused in the characteristic of R&D on Geoscience and Mineral Resources as basic research area, we survey on methods of public works' economic impact analysis including cost-benefit analysis and resent technology evaluation methods and suggest apply-methods to conduct economic impact analysis on R&D of geoscience and mineral resources. To conduct economic impact analysis on the basic research area, it need to identification research's out-come not just output. In this perspective, we propose a method, Input-Output-Outcome Roadmapping to identify the outcome of R&D and show the relation of input, output, and outcome of R&D. Furthermore, noticing the different effects of R&D from public works, we directly evaluate the use-value of the academic theory or geological maps through Contingent Valuation Method(CVM) and others developed as evaluation methods on environmental goods. In indirect application methods, it can evaluate the partial of the pubic works' benefit with assuming R&D factors if R&D is a part of public works. If not, we evaluate the R&D's value as reductions of costs or additions of benefit with finding related public works.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.1
• /
• pp.131-138
• /
• 2006

Recently, data gathering and algorithm developing are in progress for the GIS application using point feature. Several researches prove that verification of the spatial clustering and evaluation of inter-dependencies between event and control are possible. On the other hand, most of the point features as GIS data are gathered by indirect method, such as address geo-coding, rather than by direct method, such as field surveying. Futhermore, lots of statistics by administrative district based on the point features have no coordinates information of the points. In this study, calculating the K-index in GIS environment, to evaluate the effect of aggregation of raw data on K-index, K-indices estimated from raw data (parcel unit), topographically aggregated data (block unit), administratively aggregated data (administrative district unit) are compared and evaluated. As a result, point feature, highly clustered in local area, is largely distorted when aggregated administratively. But, the K-indices of topographically aggregated data is very similar to the K-indices of raw data.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.4
• /
• pp.2533-2540
• /
• 2013

Background: Although screening is necessary where gastric cancer is particularly common in Asia, the performance outcomes of mass screening programs have remained unclear. This study was conducted to evaluate cost-effectiveness outcomes of the national cancer screening program (NCSP) for gastric cancer in South Korea. Materials and Methods: People aged 40 years or over during 2002-2003 (baseline) were the target population. Screening recipients and patients diagnosed with gastric cancers were identified using the NCSP and Korea Central Cancer Registry databases. Clinical outcomes were measured in terms of mortality and life-years saved (LYS) of gastric cancer patients during 7 years based on merged data from the Korean National Health Insurance Corporation and National Statistical Office. We considered direct, indirect, and productivity-loss costs associated with screening attendance. Incremental cost-effectiveness ratio (ICER) estimates were produced according to screening method, sex, and age group compared to non-screening. Results: The age-adjusted ICER for survival was 260,201,000-371,011,000 Korean Won (KW; 1USD=1,088 KW) for the upper-gastrointestinal (UGI) tract over non-screening. Endoscopy ICERs were lower (119,099,000-178,700,000 KW/survival) than UGI. To increase 1 life-year, additional costs of approximately 14,466,000-15,014,000 KW and 8,817,000-9,755,000 KW were required for UGI and endoscopy, respectively. Endoscopy was the most cost-effective strategy for males and females. With regard to sensitivity analyses varying based on the upper age limit, endoscopy NCSP was dominant for both males and females. For males, an upper limit of age 75 or 80 years could be considered. ICER estimates for LYS indicate that the gastric cancer screening program in Korea is cost-effective. Conclusion: Endoscopy should be recommended as a first-line method in Korea because it is beneficial among the Korean population.