• 치위생과학회지
• /
• 제15권4호
• /
• pp.407-412
• /
• 2015

본 연구에서는 심미성 향상을 위한 3종의 GS 복합 레진의 굽힘 특성 평가를 위해 ISO 4049 규격에 따라 실험을 설계하여 3점 FS 실험을 통하여 FS와 FM, WOF를 측정하고 분석하여 각각의 기계적 특성간의 상호 상관성 및 신뢰도를 평가하고, GS 복합레진의 기계적 거동 평가 및 재료 선택에 유용한 정보를 얻고자 하였다. 그 결과, 3종의 GS 복합레진의 FS와 FM은 TP에서 가장 높았으며, TF의 FS는 ISO 권장 강도인 80 MPa에 미치지 못했다. 파절될 때 흡수한 에너지를 나타내는 WOF는 T에서 가장 높았으며, TP에서 가장 낮았다. GS 복합 레진의 FS, FM은 재료별 유의한 차이를 보였으나(p<0.05), WOF는 유의한 차이가 없었다(p>0.05). GS 복합 레진의 와이블 계수는 TP에서 가장 높았으며(m=14.22) 신뢰도가 높았고, CL에서 가장 낮은 값(m=6.09)으로 낮은 신뢰도를 보였다. 복합 레진은 각각의 굽힘 특성 간 매우 높은 상관성을 보였으며($r^2>0.97$), FS와 WOF, FM과와 WOF는 높은 음의 상관성을 보였다. 따라서 굽힘 특성 간의 기계적 거동 평가에 중요한 요인으로 상호 상관성이 입증되었으며, 향후 재료 선택에 있어서 임상 적용 시 중요한 지표로 사용될 수 있을 것으로 생각된다.

• Restorative Dentistry and Endodontics
• /
• 제29권6호
• /
• pp.532-540
• /
• 2004

The aim of this study was to measure the cusp deflection during composite restoration for MOD cavity in premolar and to examine the influence of cavity dimension, C-factor and restoration method on the cusp deflection. Thirty extracted maxillary premolar were prepared to four different sizes of MOD cavity and divided into six groups. The width and depth of the cavity were as follows. Group 1; $1.5{\;}{\times}{\;}1{\;}mm$, Group 2; $1.5{\;}{\times}{\;}2{\;}mm$, Group 3; $3{\;}{\times}{\;}1{\;}mm$, and Group 4-6; $3{\;}{\times}{\;}2{\;}mm$ respectively. Group 1-4 were restored using bulk filling method with Z-250 composite. However, Group 5 was restored incrementally, and Group 6 was restored with an indirect resin inlay. The cusp deflection was recorded at the buccal and lingual cusp tips using LVDT probe for 10,000 seconds. The measured cusp deflections were compared between groups, and the relationship between the cube of the length of cavity wall/the cube of the thickness of cavity wall ($L^3/T^3$). C-factor and cusp deflection or % flexure ($100{\;}{\times}$ cuspal deflection / cavity width) was analyzed. The cusp deflection of Group 1-4 were $12.1{\;}\mu\textrm{m},{\;}17.2{\;}\mu\textrm{m},{\;}16.2{\;}\mu\textrm{m}{\;}and{\;}26.4{\;}\mu\textrm{m}$ respectively. The C-factor was related to the % flexure rather than the cusp deflection. There was a strong positive correlationship between the $L^3/T^3$ and the cusp deflection. The cusp deflection of Group 5 and 6 were $17.4{\;}\mu\textrm{m}{\;}and{\;}17.9{\;}\mu\textrm{m}$ respectively, which are much lower value than that of Group 4.

• 대한치과보철학회지
• /
• 제38권3호
• /
• pp.366-374
• /
• 2000

FRC/ceromer system provides the clinician with a durable, flexible, and esthetic alternative to conventional porcelain fused to metal crowns. FRC is the matrix which is silica-coated and embedded in a resin matrix. The ceromer material which is a second generation indirect composite resin contains silanized, microhybrid inorganic fillers embedded in a light-curing organic matrix. FRC/ceromer restoration has a several advantages: better shock absorption, less wear of occluding teeth, translucency, color stability, bonding ability to dental hard tissues, and resiliency. It has versatility of use including inlay, onlay, single crown, and esthetic veneers. With adhesive technique, it can be used for single tooth replacement in forms of inlay adhesion bridge. In single tooth missing case, conventional PFM bridge has been used for esthetic restoration. However, this restoration has several disadvantages such as high cost, potential framework distortion during fabrication, and difficulty in repairing fractures. Inlay adhesion bridge with FRC/ceromer would be a good alternative treatment plan. This article describes a cases restored with Targis/Vectris inlay adhesion bridge. Tooth preparation guide, fabrication procedure, and cementation procedure of this system will be dealt. The strength/weakness of this restoration will be mentioned, also. If it has been used appropriately in carefully selected case, it can satisfy not only dentist's demand of sparing dental hard tissue but also patient's desire of seeking a esthetic restorations with a natural appearance.

• 대한치과보철학회지
• /
• 제46권6호
• /
• pp.577-585
• /
• 2008

STATEMENT OF PROBLEM: The discoloration of anterior teeth restoration is one of the material problems demanding retreatment. OBJECTIVES: To evaluate the color stability and affecting factors on esthetic restorative materials when subjected to accelerated aging. MATERIAL AND METHODS: This study was conducted using porcelain disks (IPS Empress 2-glazed, IPS Empress 2-polished), direct restorative resin disks (SYNERGY Duo) and indirect restorative resin disks (Sinfony, TESCERA ATL). Accelerated aging was done by precipitating the specimens in 38.C distilled water and irradiating with xenon light, and the total irradiation was 397.98 KJ/mm. Color and microhardness change of the specimens were measured before accelerated aging and after 100 hours, 200 hours and 300 hours of accelerated aging, and Surface of the specimens were examined with SEM before and after 300 hours of accelerated aging. RESULTS: 1. After 300 hours' accelerated aging, a ${\Delta}E$ value was 3.3 or lower in IPS Empress 2-glazed, IPS Empress 2-polished and Sinfony. 2. After 300 hours' accelerated aging, gloss was lost and surface changes including microcracks were observed in TESCERA ATL and SYNERGY Duo, and color changes of them ranged between 3.58 and 6.40 ${\Delta}E$ units. 3. During 300 hours' accelerated aging, the microhardness of surface was increased by 3.21 - 19.64% in all kinds of composites resin. CONCLUSION: After 300 hours' accelerated aging, SEM images IPS Empress 2-glazed, IPS Empress 2-polished and Sinfony showed little morphological change and their color changes were considered to be clinically acceptable. And there was significant correlation between microhardness changes and color changes of composites (P < .05).

• Restorative Dentistry and Endodontics
• /
• 제44권3호
• /
• pp.27.1-27.12
• /
• 2019

This case report describes a technique in which endodontic treatment and permanent indirect restoration were completed in the same clinical appointment with the aid of a computer-aided design/computer-aided manufacturing (CAD/CAM) system. Two patients were diagnosed with irreversible pulpitis of the mandibular first molar. After access preparation, root canals were located, irrigation was performed until bleeding ceased, and the coronal tooth structure was prepared for indirect restoration. Then, utilizing an interim 3-mm build-up of the endodontic access cavity, a hemi-arch digital scan was performed with an intraoral scanner. Subsequent to digital scanning, restoration design was performed simultaneously with the endodontic procedure. The root canals were shaped using the Race system under irrigation with 2.5% sodium hypochlorite followed by root canal filling. The pulp chamber was subsequently filled with a 3-mm-thick composite resin restoration mimicking the interim build-up previously utilized to facilitate block milling in the CAD/CAM system. Clinical try-in of the permanent onlay restoration was followed by acid etching, application of a 5th generation adhesive, and cementation of the indirect restoration. Once the restoration was cemented, rubber dam isolation was removed, followed by occlusal adjustment and polishing. After 2 years of follow-up, the restorations were esthetically and functionally satisfactory, without complications.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 춘계학술대회
• /
• pp.235-237
• /
• 2001

;Dentistry has benefited from tremendous advances in technology with the introduction of new techniques and materials, and patients are aware that esthetic approaches in dentistry can change one's appearance. Increasingly. tooth-colored restorative materials have been used for restoration of posterior teeth. Tooth-colored restoration for posterior teeth can be divided into three categories: 1) the direct techniques that can be made in a single appointment and are an intraoral procedure utilizing composites: 2) the semidirect techniques that require both an intraoral and an extraoral procedure and are luted chairside utilizing composites: and 3) the indirect techniques that require several appointments and the expertise of a dental technician working with either composites or ceramics. But, resin restoration has inherent drawbacks of microleakage. polymerization shrinkage, thermal cycling problems. and wear in stress-bearing areas. On the other hand, Ceramic restorations have many advantages over resin restorations. Ceramic inlays are reported to have less leakage than resin restoration and to fit better. although marginal fidelity depends on technique and is laboratory dependent. Adhesion of luting resin is more reliable and durable to etched ceramic material than to treated resin composite. In view of color matching, periodontal health. resistance to abrasion, ceramic restoration is superior to resin restorationl. Materials which have been used for the fabrication of ceramic restorations are various. Conventional powder slurry ceramics are also available. Castable ceramics are produced by centrifugal casting of heat-treated glass ceramics. and machinable ceramics are feldspathic porcelains or cast glass ceramics which are milled using a CAD/CAM apparatus to produce inlays (for example, Cered. They may also be copy milled using the Celay apparatus. Pressable ceramics are produced from feldspathic porcelain which is supplied in ingot form and heated and moulded under pressure to produce a restoration. Infiltrated ceramics are another class of material which are available for use as ceramic inlays. An example is $In-Ceram^{\circledR}$(Vident. California, USA) which consists of a porous aluminum oxide or spinell core infiltrated with glass and subsequently veneered with feldspathic porcelain. In the 1980s. the development of compatible refractory materials made fabrication easier. and the development of adhesive resin cements greatly improved clinical success rates. This case report presents esthetic ceramic inlays for posterior teeth.teeth.

• Restorative Dentistry and Endodontics
• /
• 제21권2호
• /
• pp.619-627
• /
• 1996

There are increasing use of composite resin in the posterior teeth and the new indirect inlay technique was introduced for compensating much troubles faced in direct technique. Many researchers insisted that overall properties of restorative materials were enhanced by an additional curing but this technique still has a problems about using cement material. Resin inlay obtains retention force from friction and another adhesion to tooth structure. A shape of cavity preparation was noted but studies about cement thickness and bond strength with cavity divergency are rare. The purpose of this study is to assess the effect of cavity divergency on cement thickness and bond strength of resin inlay. Cavities, which divergency was $6^{\circ}$, $16^{\circ}$, and $26^{\circ}$ in each group, were prepared and their divergency was verified by Adobe Photoshop program through the image capture with stereo microscope and FlexCam. Inlays were fixed into the cavities with a resin cement, Superbond and were handled under chemical (in 75% ethanol for 24 hrs.) and thermal stress (500 cycles from $5^{\circ}$ to $55^{\circ}C$). MXT 70 (x400) was used for measuring the cement thickness and bond strength was evaluated with a universal testing machine. Following results were obtained : 1. The cement thickness in Mean (S.D.) were; 35.58 (10.31)${\mu}m$ in $6^{\circ}$ group, 35.97 (10.49)${\mu}m$ in $16^{\circ}$ group, and 41.43 (9.33)${\mu}m$ in $26^{\circ}$ group. But there was no significant difference between groups. 2. The bond strength in Mean (S.D.) were ; 33.18 (5.53)kg in $6^{\circ}$ group, 23.47 (13.40)kg in $16^{\circ}$ group, and 19.75 (10.48)kg in $26^{\circ}$ group. $6^{\circ}$ group showed significantly higher value compared to $16^{\circ}$ and $26^{\circ}$ groups (p<0.05). Although the results of this study indicate $6^{\circ}$ divergency will be good for resin inlay, cavity preparation with this type will have lots of difficulties in manufacturing, try-in, and cementation procedures, such as deformation. So it is concluded that $16^{\circ}$ divergent cavity preparation is recommended in resin inlay technique.

• Restorative Dentistry and Endodontics
• /
• 제33권4호
• /
• pp.389-396
• /
• 2008

본 연구는 레진 시멘트의 색 안정성을 평가하여, 레진 시멘트의 변색에 의한 심미 수복물의 실패의 가능성을 평가하고자 시행하였다. 4종의 이원중합형 레진 시멘트인 Panavia-F (PA, KURARAY), Duolink (DL; BISCO), Variolink II (VL; Ivoclar Vivadent), 및 RelyX Unicem (UC: 3M ESPE)과 1종의 자가중합형 레진 시멘트인 Resiment Ready-Mix (with fluoride) CE (RM: j.1.Blosser)를 사용하였으며, 대조군으로 복합레진 Gradia Direct (CD ; GC)과 복합 레진 인레이용 Tecera Dentin A3 (TE ; Bisco)를 사용했다. 각 재료 당 직경 6.5 mm, 두께 4.5 mm의 디스크형 시편 10개를 제작하였다. 중합 후 시편은 분광색채계측기인 Spectrolino (GretagMacbeth)를 이용해 CIE $L^*a^*b^*$값을 측정하고 가속시험을 위해 빛이 차단된 refrigerated bath circulator에서 60$^{\circ}C$ 증류수에 30일간 보관 후에 색 측정을 시행하고, 시험 전 후의 색차를 계산하였다. 가속 시험 후 $L^*$ 값은 감소하는 양상을 보였고, $a^*$ 값은 증가하는 양상을 보였지만 유의한 차이는 없었다. 반면 $b^*$ 값은 유의하게 증가하였다 (p < 0.05). TE가 15일과 30일 모두에서 가장 적은 색변화 (p < 0.05)를 보인 반면 GD는 15일 가속 실험 후 큰 색변화를 보였다. 30일 가속 실험 후 PA, VL, RM, DL 그리고 UC 순으로 ${\Delta}E^*$값이 커졌으며 (p < 0.05), 30일 후 모든 레진시멘트 들은 육안으로 변색을 인지 할 수 있는 3 이상의 ${\Delta}E^*$ 값을 보였다.

• Restorative Dentistry and Endodontics
• /
• 제30권3호
• /
• pp.158-169
• /
• 2005

본 연구는 간접 복합 레진 인레이 수복 시 기저재로 사용되는 광중합형 글래스아이오노머와 인레이 접착에 사용되는 레진 시멘트간의 접착 전까지의 시간 경과에 따른 전단 결합강도를 측정하고, 상아질과 글래스아이오노머, 글래스아이오노머와 레진 시멘트간 접착계면에 대해 SEM 관찰하였다. 2종의 광중합형 글래스아이오노머 시멘트 Fuji II LC (GC Co, Tokyo, Japan)와 Vitrebond$^{TM}$ (3M, Paul, Minnesota, U.S.A)의 시편을 제작하였다 5 mmx7 mm의 실리콘 주형에 Artglass$^{(R)}$ (Heraeus Kultzer, Germany)를 이용하여 레진 인레이를 제작하였다. 글래스아이오노머 베이스를 각 각 1시간, 24시간, 1주 및 2주 동안 37$^{\circ}C$ 증류수에 보관한 후 Variolink$^{(R)}$ II (Ivoclar Vivadent, Liechtenstein)를 적용하여 인레이를 접착하였다. 만능 물성시험기(Model 4302, Instron, U.S.A)를 이용하여 결합 면에 1 mm/min의 속도로 1000 kg 하중을 가하여 전단 결합강도를 측정하였고, one-way ANOVA를 이용하여 통계 분석하였다. SEM 관찰을 위해 발거된 제 3대구치에 2급 와동을 형성하였고, 기저재로 광중합형 글래스아이오노머 시멘트를 적용하였다. 인레이를 접착한 시편을 수직 절단하여 상아질, 글래스아이오노머, 및 복합레진 인레이 간의 계면을 SEM (JSM-5400$^{(R)}$ Jeol, Tokyo, Japan) 관찰하였다. 시간 경과에 따른 글래스아이오노머와 복합 레진 인레이 사이의 전단 결합강도는 통계학적으로 유의한 차이가 없었으며, 기저재 재료에 따른 전단 결합강도의 유의한 차이도 없었으며 대부분 시편에서 글라스아이오노머 내부에서 응집 파괴 (Cohesive failure)가 발생하였다. SEM 관찰 시 글래스아이오노머와 상아질 사이에 약 30-20 $\mu$rn 정도의 간극 (gap)이 형성되었으며 , 글래스아이오노머와 복합 레진 인레이 계면에서는 1시간 후 접착한 시편을 제외하고 간극은 발견되지 않았다.

• 대한심미치과학회지
• /
• 제17권1호
• /
• pp.23-30
• /
• 2008

Application of CAD/CAM is changing the way partial or full veneer all ceramic restoration is made. CAD/CAM systems, which were used mainly in other industries, have been developed and introduced for the dental purposes recently. It produced a flood of information on the CAD/CAM systems. It also influenced the development of restorative materials and all ceramic is substituting the traditional restorative materials of gold, composite resin and metal. Price increase of gold and other raw materials made the all ceramic more appealing. The introduction of a CEREC 3D system was innovative in several ways. Image of the prepared tooth is captured by camera and impression taking is unnecessary. Restoration can be delivered to the patient on one appointment and it will satisfy the demand of busy patients. One-day treatment with direct CAD/CAM system saves time compared to indirect CAD/CAM system. More superior restoration can be produced if lab work such as the adaptability check and shade selection is cooperated with lab technician. Short working time and comparably superior shade compatibility of color block was close to ideal. In the future, restorations with better quality can be fabricated in less time to busy patients thanks to the development of CAD/CAM system and dental materials.