• 대한치과의사협회지
• /
• 제37권7호통권362호
• /
• pp.530-535
• /
• 1999

Detailed finishing of the occlusion is a clinical skill that has become difficult with the development of fixed appliances. Accuracy of bracket placement definitely improves with indirect technique, Several methods for the placement of orthodontic brackets on dental casts are currently used in the indirect bonding technique. These include attachment by means of bonding resins, adhesive tapes or sticky wax. This article presents the indirect procedures of our clinic, which use paste-paste chemically cured composites. Detailed laboratory and clinical procedure for dual tray method and other application of indirect bonding will be presented.

• 대한치과교정학회지
• /
• 제19권2호
• /
• pp.155-163
• /
• 1989

Indirect bonding is done by placing the brackets on a model in the laboratory and using a template or tray to transfer the laboratory positioning to the teeth. The advantages of this technique are 1. decreased chair time 2. less patient discomfort 3. accuracy of a attachment placement 4. good adaptation of attachment to tooth contour 5. occlusal relationship of brackets and opposing teeth can be checked The disadvantages of the technique are 1. complex laboratory procedure 2. sometimes difficult on very short clinical crowns 3. teeth with crowns, large buccal restoration will not bond 4. may not be fitted close, if poor adaptation 5. likely to be disturbed setting Several indirect bonding techniques have proved reliable in clinical practice. However, they differ in the way the brackets are attached temporarily to the model, the type of transfer tray or other mechanism used, the adhesive or sealant employed, whether segmented or full bonding used, and the way the transfer is removed so as not to exert excessive force on a still maturing bond.

• 대한치과교정학회지
• /
• 제41권6호
• /
• pp.447-453
• /
• 2011

Objective: We compared the shear bond strength (SBS) of lingual retainers bonded to bovine enamel with three different resins using direct and indirect methods. Methods: Both ends of pre-fabricated twisted ligature wires were bonded to bovine enamel surfaces using Light-Core, Tetric N-Flow, or Transbond XT. Phosphoric acid-etched enamel surfaces were primed with One-Step prior to bonding with Light-Core or Tetric N-Flow. Transbond XT primer was used prior to bonding with Transbond XT. After 24 hours in water at $37^{\circ}C$, we performed SBS tests on the samples. We also assigned adhesive remnant index (ARI) scores after debonding and predicted the clinical performance of materials and bonding techniques from Weibull analyses. Results: Direct bonding produced significantly higher SBS values than indirect bonding for all materials. The SBS for Light-Core was significantly higher than that for Tetric N-Flow, and there was no significant difference between the direct bonding SBS of Transbond XT and that of Light-Core. Weibull analysis indicated Light-Core performed better than other indirectly bonded resins. Conclusions: When the SBS of a wire retainer is of primary concern, direct bonding methods are superior to indirect bonding methods. Light-Core may perform better than Transbond XT or Tetric N-Flow when bonded indirectly.

• 대한치과의사협회지
• /
• 제52권1호
• /
• pp.17-26
• /
• 2014

Computerized 3D virtual dental models are currently available, and their use has started to improve treatment outcomes. The accuracy of digital models has been demonstrated by many studies and various intra-oral scanners are innovated for short scanning time and high precision. Recently, a digital model was combined with a high technology computer-driven system, which was developed for the application of a digital set-up and indirect bonding of lingual attachments. In this section, virtual treatment planning using a virtual set-up program is be introduced, and the clinical applications and accuracy of computer-generated indirect bonding are discussed.

• 대한치과교정학회지
• /
• 제48권4호
• /
• pp.245-252
• /
• 2018

Objective: We aimed to perform in-vitro evaluation to compare 1) shear bond strength (SBS), adhesive remnant index (ARI), and color change between self-etched and acid-etched primers; 2) the SBS, ARI and color change between direct and indirect bonding; and 3) the enamel roughness (ER) between 12-blade bur and aluminum oxide polisher debonding methods. Methods: Seventy bovine incisors were distributed in seven groups: control (no bonding), direct (DTBX), and 5 indirect bonding (ITBX, IZ350, ISONDHI, ISEP, and ITBXp). Transbond XT Primer was used in the DTBX, ITBX, and ITBXp groups, flow resin Z350 in the IZ350 group, Sondhi in the ISONDHI group, and SEP primer in the ISEP group. SBS, ARI, and ER were evaluated. The adhesive remnant was removed using a low-speed tungsten bur in all groups except the ITBXp, in which an aluminum oxide polisher was used. After coffee staining, color evaluations were performed using a spectrophotometer immediately after staining and prior to bonding. Results: ISONDHI and ISEP showed significantly lower SBS (p < 0.01). DTBX had a greater number of teeth with all the adhesive on the enamel (70%), compared with the indirect bonding groups (0-30%). The ER in the ITBX and ITBXp groups was found to be greater because of both clean-up techniques used. Conclusions: Direct and indirect bonding have similar results and all the primers used show satisfactory adhesion strength. Use of burs and polishers increases the ER, but polishers ensure greater integrity of the initial roughness. Resin tags do not change the color of the teeth.

• Journal of Periodontal and Implant Science
• /
• 제28권1호
• /
• pp.177-185
• /
• 1998

치주염환자에서는 치아의 회전이나 순측경사등으로 인한 상악 정중부 이개 등의 심미적, 기능적 문제들이 자주 수반되어 후속 적인 교정치료를 요하는 경우가 많다. 이러한 경우 보조적인 교정치료로도 치료가 가능한데, 안정된 후방구치에서는 교정력을 가하지 않고 고정 원으로써 작용하게 하고 해당 치아만을 이동시켜야만 한다. 그러나 성인교정에서는 제한점들이 많기 때문에 비교정전문의에게는 섣불리 교정치료를 하기가 어렵다. 더구나 정확히 브라켓을 장착하는 것이 중요한데 간단한 문제는 아니다. Silverman등이 indirect bonding technique을 소개하면서 이런 문제점들을 해결하는데 도움을 주게 되었다. 그후 여러 사람 들에서 다양한 방법들이 소개되었지만 기본적인 원리는 구강 외에서 이상적인 위치에 브라켓을 위치시키고 tray를 이용해서 구강내 치아면에 재현하는 방법이다. 이런 방법을 이용함으로써 molar uprighting, forced eruption, 악교정술시 surgical arch wire 장착, 설측교정술 등에도 쉽게 적용할 수 있다. 이러한 관점에서, 비교정전문의들도 보다 쉽고, 정확하게 브라켓을 위치시킬 수 있는 indirect bonding technique를 이용한다면 보조적인 교정치료 뿐만 아니라 포괄적인 교정치료도 가능하리라 사료된다.

• 대한치과교정학회지
• /
• 제26권6호
• /
• pp.717-721
• /
• 1996

With conventional orthodontics, it was difficult for the anchorage segments of the wire to be engaged passively in the brackets even with complicated bending. To overcome this limitation, a kind of indirect bonding, "passive bracketing", has been developed. The present article shows laboratory and clinical procedures of the passive bracketing

• 대한치과교정학회지
• /
• 제21권3호
• /
• pp.513-520
• /
• 1991

The purpose of this study was to compare the bracket placement and the shear bond strength of indirect-bonded brackets with those of direct-bonded ones. Forty eight extracted human teeth were collected and attached with brackets and tested on shear bond strength, using Instron. Fourteen patients from Wonkwang University Dental Hospital were selected for direct bonding of brackets and their teeth were measured on bracket angulation and bracket height. The obtained results were as follows: 1. The shear bond strengths of incisors were higher in direct-bonding,group, rather than in-direct-bonding group. But, the shear bond strength of premolars showed no significant differences between groups. 2. The bracket angulations of indirect-bonding group were preciser than those of direct-bonding group, especially in upper first premolars, lower lateral incisors, canines, premolars. 3. In bracket height, there were no significant differences between groups.

• 대한치과교정학회지
• /
• 제39권6호
• /
• pp.393-401
• /
• 2009

본 연구는 직접 또는 간접 부착법으로 부착한 교정용 브라켓을 열순환 처리 후에 전단 결합 강도(shear bond strength, SBS)와 치아-접착제-브라켓 복합체의 미세 누출을 비교하기 위하여 시행하였다. 50개의 치아우식증이 없는 사람 소구치를 구하여 동등한 2개의 군으로 나누었다. 직접 부착군에서는 광중합 접착제 및 primer (Transbond XT)를 사용하였고 간접 부착군에서는 광중합 접착제와(Transbond XT) 화학중합 primer (Sondhi Rapid Set)를 사용하였다. 중합 후에 치아는 24시간 동안 증류수에 보관하였고 이후 500회 열순환 처리를 하였다. 미세누출의 평가를 위해 각 군에서 10개의 치아에 nail varnish로 추가 봉연을 실시하고 0.5% basic fuchsin에 24시간 동안 염색한 후 입체현미경으로 검경하였다. 만능시험기를 이용하여 각 군의 치아 15개로 SBS를 계측하였고 adhesive remnant index (ARI)를 평가하였다. 결과 자료는 Mann-Whitney U test, Chi-square test, Fisher's exact test로 통계 분석하였다. 직접 부착군과 간접 부착군 사이에 SBS 및 미세누출의 통계적으로 유의한 차이는 보이지 않았으며 간접 부착군에서 통계적으로 유의하게 ARI 점수가 낮았다. 브라켓의 탈락은 법랑질-레진 계면에서 발생하였다. 이상의 결과로 보아 부착법의 차이는 미세누출의 양과 SBS에 유의한 영향을 미치지 않는다.

• Journal of Welding and Joining
• /
• 제29권4호
• /
• pp.93-99
• /
• 2011

This study was performed to compare the shear strength of the bondings between stainless steel crown/direct type composite resin and stainless steel crown/indirect type composite resin. Four groups of bonding conditions were prepared. Two groups of bonding conditions were made by the indirect type composite resin system and the other two groups were made by the direct type composite resin system. The shear strength tests were carried out using universal testing machine, Model 4465 of Instron Co.. It was indicated that the bond strength values of the indirect type composite resins were higher than those of the direct type composite resins. TE-SE group was superior to the TE-ONE in indirect type resin system. These results were thought to be the high degree of the polymerization accompanied with temperature and pressure of the resin of indirect type resin. It was also found that indirect composite resin contains less amount of porosity in resin.