• 한국도로학회논문집
• /
• 제16권4호
• /
• pp.45-50
• /
• 2014

PURPOSES : The objective of this study is to analyze the performance of anti-stripping agent depending on its type and content to reduce pothole, an increasing pavement distress due to abnormal climate intensity. METHODS : In the past years, U.S and many countries in Europe use hydrated lime and liquid anti-stripping agent in asphalt mixtures. Hydrated lime or liquid anti-stripping agent is substituted for filler and binder, respectively, to improve the anti-stripping property of asphalt mixtures. To investigate this, indirect tensile strength test was performed and TSR values were compared for different content of hydrated lime and types of liquid anti-stripping agent in asphalt mixture. RESULTS : Test results indicate that hydrated lime remarkably increased the asphalt mixture performance on anti-stripping denoted by the increased in TSR values from 55% to 100%. Liquid anti-stripping agent also increased the value of TSR but not significant. In addition, depending on the types of aggregate, TSR values and effect of liquid anti-stripping were different. CONCLUSIONS : Using anti-stripping agents improve the anti-stripping property of asphalt mixture especially hydrated lime; however, more experiments should be conducted to improve the reliability about the effect of liquid anti-stripping agent.

• 한국농공학회논문집
• /
• 제61권3호
• /
• pp.31-41
• /
• 2019

More than 90% of roadway in the world are paved as asphalt concrete pavement due to its excellent properties compared with other paving materials; excellent riding quality, flexibility, anti-icing property and easy maintenance-ability. In this study, to make best use of the softer property of the asphalt mixture, the flexible sand asphalt mixture (FSAM) was developed for pedestrian ways. The mix design was conducted to prepare FSAM using PG64-22 asphalt, screenings (sand) less than 5mm, crumb rubber, hydrated lime and limestone powder without coarse aggregate. The deformation strength ($S_D$), indirect tensile strength (ITS) and tensile strength ratio (TSR) tests were conducted to make sure durability of FSAM performance. The impact energy absorption and flexibility were measured by drop-boll test and the resilient modulus ($M_R$) test. The impact energy absorption of FSAM was compared with normal asphalt pavement, concrete pavement, stone and concrete block for pedestrian way. As a result of drop-boll test, FSAM showed higher impact energy absorption compared with other paving materials with the range of 18% to 43%. Impact energy absorption of FSAM increased with increasing test temperature from 5 to $40^{\circ}C$. The results of $M_R$ test at $5^{\circ}C$ showed that the flexibility of FSPA was increased further, because the $M_R$ value of the sand asphalt was measured to be 38% lower than normal dense-graded asphalt mixture (WC-1). Therefore, it was concluded that the FSAM could provide a high impact absorbing characteristics, which would improve walking quality of the pedestrian ways.

• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.189-197
• /
• 2003

건설공사에서 발생되는 건설잔토는 처리 및 운반에 소요되는 비용이 고가이기 때문에 현장에서 재활용하기 위한 공법의 개발이 오래 전부터 요구되어 왔다. 본 연구는 현장에서 발생하는 토사를 아스팔트에 혼합하여 제조된 아스팔트 안정처리토의 역학적 특성을 평가하기 위한 실내시험 연구이다. 아스팔트와 토사의 혼합은 폼드(foamed)장치라고 불리는 장치를 사용하여 아스팔트에 거품을 발생시켜 토사와 혼합하는 방법을 사용하였다. 아스팔트가 토사와 혼합되었을 때 성능 향상을 조사하기 위해서 마샬안정도, 간접인장강도, 회복탄성계수, 크리프 시험 및 비압밀 비배수 삼축압축시험을 실시하였으며 조건을 달리하여 제작한 시료(일반토사, 시멘트 2% 보강 토사)와 결과를 비교 분석하였다. 시험 결과 아스팔트의 혼입은 안정도, 회복탄성계수, 수분저항성이 향상되는 것으로 나타났으며 시멘트의 첨가는 이러한 역학적 성능을 더욱 크게 향상시키는 것으로 나타났다. 아스팔트 안정토는 토사의 혼합 함수비, 습윤상태는 시험 결과에 영향을 미치는 것이 확인되었는데 배합 설계시 혼합함수비, 세립분의 량을 조절함으로써 아스팔트 안정토의 역학적 특성을 향상시킬 수 있는 것으로 발견되었다.

• 대한토목학회논문집
• /
• 제39권4호
• /
• pp.523-530
• /
• 2019

포트홀 발생 및 관련 교통사고 건수는 매년 꾸준히 증가하는 추세이며 이에 따른 인명피해, 차량파손에 따른 비용손실 등 도로 이용자의 직 간접적인 피해를 증가시키고 있다. 일반적으로 아스팔트 혼합물은 생산과정부터 시공 후 공용에 따라 지속적으로 노화가 진행된다. 포장 노화는 균열과 수분침투로 박리를 야기하고 반복적인 윤하중에 의해 포장구조를 약화시켜 포트홀을 유발하게 된다. 본 연구에서는 노화가 아스팔트 콘크리트 포장에 미치는 영향을 검토하기 위해 노화정도에 따른 부착성능 평가와 수분민감성 평가를 수행하였다. 연구결과 노화에 따라 아스팔트 바인더의 점성이 증가해 부착강도가 2~3배 이상 증가하였다. 또한 가속 노화시킨 아스팔트 혼합물의 경우 간접인장강도의 증가뿐만 아니라 TSR 값도 4.2~8.9 % 증가하는 것으로 나타났다. 이에 따라 골재에 아스팔트 바인더가 피복된 상태에서 노화가 진행될 경우 아스팔트 바인더와 골재의 부착력이 증가하여 박리 저항성이 향상되는 것으로 분석되었다.

• Geomechanics and Engineering
• /
• 제21권4호
• /
• pp.391-399
• /
• 2020

Brittleness is one of the most important properties of rock which has a major impact not only on the failure process of intact rock but also on the response of rock mass to tunneling and mining projects. Due to the lack of a universally accepted definition of rock brittleness, a wide range of methods, including direct and indirect methods, have been developed for its measurement. Measuring rock brittleness by direct methods requires special equipment which may lead to financial inconveniences and is usually unavailable in most of rock mechanic laboratories. Accordingly, this study aimed to develop a new strength-based index for predicting rock brittleness based on the obtained base form. To this end, an innovative algorithm was developed in Matlab environment. The utilized algorithm finds the optimal index based on the open access dataset including the results of punch penetration test (PPT), uniaxial compressive and Brazilian tensile strength. Validation of proposed index was checked by the coefficient of determination (R²), the root mean square error (RMSE), and also the variance for account (VAF). The results indicated that among the different brittleness indices, the suggested equation is the most accurate one, since it has the optimal R², RMSE and VAF as 0.912, 3.47 and 89.8%, respectively. It could finally be concluded that, using the proposed brittleness index, rock brittleness can be reliably predicted with a high level of accuracy.

• 한국농공학회지
• /
• 제44권5호
• /
• pp.88-95
• /
• 2002

This study is a fundamental research for recycling waste vinyl (WV) in asphalt mixture for improving roadway pavement. Mix design was conducted by WV content and optimum asphalt content (OAC) was determined for dense-graded surface course mixture. Marshall stability test, indirect tensile strength (ITS) test and wheel tracking test were carried out to measure the characteristics of WV-added asphalt concretes. From the results of this study, recycling WV in asphalt mixture is possible. However, as WV content increased, melted WV clustering appeared in asphalt mixture. It could be considered that adding too much WV in asphalt mixture is not proper. The proper content of LDPE and HDPE WV was appeared to be 12% and 8%, respectively.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.127-135
• /
• 2017

PURPOSES: The objective of this study is to evaluate the effect of anti-stripping on asphalt mixtures constituting anti-stripping agents. METHODS : Based on the literature review, asphalt mixture added with anti-stripping agents was prepared, and these asphalt mixtures were evaluated for anti-stripping properties for each anti-stripping agent through various lab tests, namely, tensile strength ratio (TSR), dynamic immersion test, uniaxial compression test, and indirect tensile strength test (IDT). The liquid anti-stripping agents used in the lab test were premixed with each asphalt binder (PG 64-22, PG 76-22) before being mixed with the aggregate. RESULTS :The result of the TSR test revealed that the effect of anti-stripping was highest when hydrated lime and liquid anti-stripping agent W were added. The correlation coefficient $R^2$ between the TSR result and cohesion ratio is 0.99, which indicates that the sensitivity of the TSR to moisture damage is reliable from the mechanical point of view. The covering ratio of the asphalt binder to the liquid anti-stripping agent W was determined to be higher than that to the other liquid anti-stripping agents. CONCLUSIONS :It is considered that the improved moisture resistance of asphalt mixture as a result of the use of anti-stripping agents can reduce the incidence of various pavement damages such as portholes caused by stripping, and the performance life of the asphalt road pavement can be prolonged.

• The Journal of Advanced Prosthodontics
• /
• 제8권4호
• /
• pp.275-284
• /
• 2016

PURPOSE. The aim of this study was to evaluate the influence of different surface treatment methods on the microtensile bond strength of resin cement to resin nanoceramic (RNC). MATERIALS AND METHODS. RNC onlays (Lava Ultimate) (n=30) were treated using air abrasion with and without a universal adhesive, or HF etching followed by a universal adhesive with and without a silane coupling agent, or tribological silica coating with and without a universal adhesive, and divided into 6 groups. Onlays were luted with resin cement to dentin surfaces. A microtensile bond strength test was performed and evaluated by one-way ANOVA and Tukey HSD test (${\alpha}$=.05). A nanoscratch test, field emission scanning electron microscopy, and energy dispersive X-ray spectroscopy were used for micromorphologic analysis (${\alpha}$=.05). The roughness and elemental proportion were evaluated by Kruskal-Wallis test and Mann-Whitney U test. RESULTS. Tribological silica coating showed the highest roughness, followed by air abrasion and HF etching. After HF etching, the RNC surface presented a decrease in oxygen, silicon, and zirconium ratio with increasing carbon ratio. Air abrasion with universal adhesive showed the highest bond strength followed by tribological silica coating with universal adhesive. HF etching with universal adhesive showed the lowest bond strength. CONCLUSION. An improved understanding of the effect of surface treatment of RNC could enhance the durability of resin bonding when used for indirect restorations. When using RNC for restoration, effective and systemic surface roughening methods and an appropriate adhesive are required.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.41-52
• /
• 2008

본 연구는 박리방지 첨가제를 혼입한 아스팔트 혼합물의 수분민감성에 대한 특성 평가 방안을 제시하고자, 기존의 수침 시험을 개선한 3가지 종류($H_c$, $V_s$, F-T)의 수침 방법을 통하여 생석회, 소석회, 1종의 액상 박리방지 첨가제를 혼입한 각 아스팔트 혼합물에 대한 수분민감성의 거동 특성을 분석하였다. 실험방법은 AASHTO TP-9에 규정된 간접인장시험(Indirect Tensile Test, IDT)을 통한 크리프시험 (Creep Test), 회복탄성계수시험(Resilient Modulus Test) 및 강도시험(Strength Test)을 수행하였다. 분석방법으로는 미국 플로리다 대학의 Roque에 의해 제안된 에너지비(Energy Ratio, ER) 개념을 사용하여 박리방지제의 사용에 따른 효과 및 수분민감도 특성을 평가하였다(Roque, 2004). 시험결과, 수분처리 방법 에 따른 아스팔트 흔합물의 물성 변화뿐만 아니라 박리 방지 첨가제에 따른 물성 변화가 현저하게 나타났다. 또한 누적 수분 손상에 의해 발생되는 균열에 대한 저항성이 각 첨가제 및 수분처리 방법에 따라 변화됨을 나타내었다. 이를 토대로 Energy Ratio를 분석한 결과 약 $10{\sim}30%$ 정도의 균열 저항성 변화가 나타났다.

• 한국도로학회논문집
• /
• 제11권4호
• /
• pp.25-31
• /
• 2009

SMA 혼합물은 소성변형 저항성이 매우 큰 혼합물로 알려져있다. 하지만 실내 시험에서는 이를 측정할 수 있는 시험법이 아직 미흡한 실정이다. 따라서 본 연구의 목적은 소성변형에 대하여 높은 저항성을 가지는 SMA 혼합물의 변형강도치와 반복주행시험과의 상관성 분석을 통하여 SMA에 변형강도의 적용성을 고찰하는 것이다. 이를 위해 SMA 혼합물의 배합설계를 거쳐 최적 아스팔트함량의 혼합물에 대하여 변형강도 시험과 반복주행 시험을 수행하였다. 연구결과, 변형강도는 SMA 혼합물의 소성변형 특성을 보이기에는 매우 낮은 수준을 나타냈다. 따라서 김테스트에 의한 변형강도는 간접인장강도나 마샬 안정도와 마찬가지로 SMA 혼합물의 소성변형 저항성을 제대로 반영되지 못하는 것을 확인하였다. 또한 반복주행시험의 결과인 동적안정도나 최종침하깊이도 역시 SMA 혼합물의 소성변형 저항성을 평가하는데 문제가 있는 것으로 나타났다.