• 생명과학회지
• /
• 제20권8호
• /
• pp.1159-1165
• /
• 2010

간접 열량측정법은 호흡 시의 산소 소모량이나 이산화탄소나 질소의 배출량을 측정해 에너지 소모량을 측정하고, 산화작용의 열 방출량(칼로리소비)을 산출하여 측정한다. 지난 20년 내에 간접 열량측정법에서 사용된 laboratory와 computerized 시스템은 현저하게 발전되었으며, 특히 매 호흡의 변인의 산출을 가능하게 해주는 호흡당 시스템의 사용이 증가되었다. 많은 이전의 연구에서 호흡당 시스템은 간접 열량측정도구로 타당도와 신뢰도가 높아 실험에 적합하다고 평가 하였다. 본 연구는 간접 열량측정법의 가장 적합한 호흡당 시스템을 분석하고자 한다. 하지만 다른 모든 호흡당 간접열량측정계의 타당도와 신뢰도의 효과를 검증한 연구가 많지 않다는 문제점이 있다. 그러므로, 앞으로 연구에서는 호흡당 간접열량측정계의 가장 타당도와 신뢰도가 높은 적합한 측정도구가 필요하다고 사료된다.

• 한국콘텐츠학회논문지
• /
• 제21권8호
• /
• pp.608-618
• /
• 2021

본 연구는 간호대학생을 대상으로 개발된 프로그램 학습성과 간접측정도구의 활용을 위해 타당도와 신뢰도를 검증한 연구이다. 대상자는 국내 5개 간호학과의 재학생 396명이었으며, 자료수집은 2019년 11월 22일부터 12월 10일까지 이루어졌다. 자료분석은 IBM Statistics SPSS 21.0과 AMOS 21.0 프로그램을 이용하여 문항분석, 탐색적 및 확인적 요인분석을 실시하였다. 문항분석 결과 79개 문항이 모두 요인분석 대상으로 선정되었다. 탐색적 요인 분석결과 다른 요인과 함께 부하하는 5개의 문항이 삭제되었고 최종 요인부하량의 범위는 .37부터 .86이었으며, 12개 요인에 대한 총 분산은 71.71%로 나타났다. 확인적 요인분석결과 삭제된 문항은 없었으며, 최종 척도는 74개 항목으로 구성되었다. 척도의 평균 점수는 3.78점, Cronbach' α는 .98이었다. 본 연구를 통해 간호교육 프로그램 학습성과 간접측정도구의 타당도와 신뢰성이 검증되었으므로 간호대학생을 위해 보다 표준화된 측정도구로 사용될 수 있을 것이다.

• 한국군사과학기술학회지
• /
• 제20권1호
• /
• pp.25-32
• /
• 2017

Most of weapon systems use aided navigation system which integrates inertial navigation and aiding sensors to compensate the INS errors increasing with the passage of time. Various aid sensors can be applied such as Global Navigation Satellite System (GNSS), radar, barometer, etc., but there might exist time delay caused by signal processing or transferring aid information. This time delay leads out-of-sequence measurements (OOSM) systems. Previously, optimal and suboptimal measurment update method for OOSM systems, where the time delay length are known, are proposed. However, previous algorithm does not guarantee the positive definite property of covariance matrix. In order to improve numerical stability for aided navigation using delayed-measurement, this paper proposes a new measurement covariance update algorithm be similar to Joseph-form in Kalman filter. Futhermore, we propose how to implement it in indirect feedback Kalman filter structure, which is commonly used in aided navigation systems, for time-delayed measurement systems. Simulation and vehicle test results show effectiveness of a proposed algorithm.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1054-1058
• /
• 1995

There have been many research works for the indirect cutting force measurement in machining process, which deal with the case of one-axis cutting process. In multi-axis cutting process, the main difficulties to estimate the cutting forces occur when the feed direction is reversed. This paper presents the indirect cutting force measurement method in contour NC milling processes by using current signals of servo motors. An artificial neural network (ANN) system are suggested. An artificial neural network(ANN) system is also implemented with a training set of experimental cutting data to measure cutting force indirectly. The input variables of the ANN system are the motor currents and the feedrates of x and y-axis servo motors, and output variable is the cutting force of each axis. A series of experimental works on the circular interpolated contour milling process with the path of a complete circle has been performed. It is concluded that by comparing the ANN system with a dynamometer measuring cutting force directil, the ANN system has a good performance.

• Geomechanics and Engineering
• /
• 제12권6호
• /
• pp.871-882
• /
• 2017

Indirect measure of the tensile strength of laboratory samples is an important topic in rock engineering. One of the most important tests, the Brazilian strength test is performed to obtain the tensile strength of rock, concrete and other quasi brittle materials. Because the measurements are provided indirectly and the inspected rock materials may have heterogeneous properties, uncertainty quantification is required for a reliable test evaluation. In addition to the conventional measurement evaluation uncertainty methods recommended by the Guide to the Expression of Uncertainty in Measurement (GUM), such as Taylor's and Monte Carlo Methods, a fuzzy set-based approach is also proposed and resulting uncertainties are discussed. The results showed that when a tensile strength measurement is measured by a laboratory test, its uncertainty can also be expressed by one of the methods presented.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.1043-1047
• /
• 2003

Most of the measurement and the evaluation of hand-transmitted vibration have been performed by using a small size single axis accelerometer between the handle and the hand palm or a three axis accelerometer attached on an adapter outside the hand(indirect measurement). It is most desirable for the correct evaluation of hand-transmitted vibration form the power tool handle to measure the acceleration between the handle surface and the hand palm in the three axis(direct measurement) as recommended in ISO 5349-1. In the study three axes acceleration measurement device was developed of which the thickness was less than 7mm so that it can be placed between the handle and the palm without any inconvenience during the measurement. To verify the performance of the developed device, measured acceleration by the two methods, direct and indirect, were compared in the study.

• 패션비즈니스
• /
• 제11권2호
• /
• pp.58-75
• /
• 2007

This study held human measurement for 200 male subjects in their twenties in full age living in Ningbo City, Zhejiang Province in China. Their lower body types were classified and grouped according to shapes and sizes. Consequently, representative body type reflecting shapes, sizes, and characteristics were chosen and presented with their measurement values to be used as the basic data for slacks pattern making and fitness evaluation. The following are the results of the analysis: 1. Homogeneity analysis was given to determine the correspondence relationships among index types, indirect types, and size types. Index Type 1 (H-Round), Indirect Type 2 (Adjacent Straight Legs & Slight Slant of Lateral Lower Body), and Size Type 1 (Medium-Thick) were correlated; Index Type 2 (A-Trapezoid), Indirect Type 1 (Bow Legs & Slight Slant of Lateral Lower Body), and Size Type 3 (Small-Slim) were corresponded; Index Type 3 (A-Balance), Indirect Type 3 (Balance Legs & Large Slant of Lateral Lower Body), and Size Type 2 (Tall-Normal) were mutually related. 2. Mahalanobis distance based on each shape factor (index or indirect) and size factor (absolute) was obtained, while an index-absolute representative body type group (47 people, 24.4%) and an indirect-absolute representative body type group (45 people, 23.7%) were chosen, each reflecting shapes, sizes, and characteristics. 3. The representative body type group of lower body shapes of Chinese males in their 20s had average measurement values, such as 169.15cm (stature), 73.32cm (waist circumference), 75.76cm (omphalion waist circumference), 91.08cm (hip circumference), 106.02cm (outside leg length), 53.96cm (thigh circumference), and 74.42cm (crotch length).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.238-241
• /
• 2006

For the effective reduction of structural vibration level it is important to obtain the exciting force components. But, sometimes direct force measurement is infeasible due to the geometric limitation of sensor placement. In this case, indirect force identification becomes useful tool for obtaining input force information. In this paper, indirect force technique was applied to air-jet weaving machine and shows some numerical results.

• 한국학교수학회논문집
• /
• 제21권1호
• /
• pp.19-37
• /
• 2018

본 연구에서는 우리나라의 2015 개정 초등학교 수학과 교육과정과 일본의 2017 개정 초등학교 수학과 교육과정 <측정 영역>의 7개 외연량 시간, 길이, 들이, 무게, 넓이, 각도, 부피의 지도 실정을 비교, 측정, 어림재기의 세 관점에서 비교 분석하고 있다. 이러한 비교 분석의 결과로부터 우리나라의 차기 초등학교 수학 교과서 및 차기 초등학교 수학과 교육과정 개발과 관련하여 다음과 같은 논의가 필요하다는 것을 제안할 수 있다. 첫째, 시간, 길이, 들이, 무게, 넓이, 각도, 부피 각각에 대해 비교(직관적 비교, 직접 비교. 간접 비교), 직접 측정(임의 단위에 의한 측정, 표준 단위에 의한 측정), 간접 측정, 어림재기의 취급 범위를 명확히 하는 것에 대한 논의가 필요하다. 둘째, 직관적 비교가 곤란한 경우에 직접 비교를 하게 하는 것에 대한 논의가 필요하다. 셋째, 무게의 간접 비교를 재고하는 것에 대한 논의가 필요하다. 넷째, 임의 단위에 의한 각도의 측정을 재고하는 것에 대한 논의가 필요하다. 다섯째, 넓이 $1cm^2$와 $1m^2$ 및 부피 $1cm^3$와 $1m^3$가 각각 어느 정도의 크기인지를 짐작할 수 있게 하는 B류 어림재기를 취급하는 것에 대한 논의가 필요하다.

• Design & Manufacturing
• /
• 제15권1호
• /
• pp.14-20
• /
• 2021

The objective of this study is to introduce the new possibility of sensing technology based on inductive displacement sensors to monitor the status of wheel position in the hot forging process. In order to validate effectiveness of proposed sensing technology, the indirect forging force measurement with displacement sensor was applied into a typical closed hot forging die-set used for the manufacturing of flange bolts. The locations to implement the displacement sensor were selected carefully by simulating forming process and static structural. From the measurement results of the forging force change during one hot forging cycle, it was found that the proposed monitoring system can provide useful information to understand the detailed behaviors of die-set in the closed hot forging process.