• 한국융합학회논문지
• /
• 제9권10호
• /
• pp.423-432
• /
• 2018

본 연구는 볼링 선수의 상해 경험과 유형에 따라 상 하지 근력과 좌우 비대칭 차이를 살펴보고자 하였다. 본 연구 대상자는 상지 상해 경험 집단(upper body injury group, [UG], n=16)과 하지 상해 경험 집단(low body injury group, [LG], n=8), 상해 미경험 집단(non injury group, [NG], n=15)으로 선정하였다. 볼링 선수의 상 하지 근력은 Manual Muscle Tester 01165 (Lafayette Instrument Company, USA)로 등척성 최대 근력(Isometric strength)을 측정하였으며, 비대칭 지수(symmetry index, [SI])를 산출하였다. 그 결과는 다음과 같다. 하지 근력의 좌우 비대칭 지수는 엉덩관절의 신전과 외측회전 최대근력에서 상해 무경험 집단이 하지 상해 경험 집단에 비하여 통계적으로 크게 나타났다(p<.05). 위 결과를 통하여 하지 근력의 좌우 대칭이 하지 상해와 밀접한 관련이 있다고 판단되며, 상해 예방을 위해 하지 근력의 좌우 대칭 훈련이 필요할 것으로 판단된다.

• 반도체디스플레이기술학회지
• /
• 제13권3호
• /
• pp.27-33
• /
• 2014

To develop high efficiency crystalline solar cells, the $SiN_x$ film for surface passivation and anti-reflection coating is very important and it is generally deposited by PECVD. In this paper, the $SiN_x$ film deposited by Hot-Wire chemical vapor deposition(HWCVD) that has no plasma damage was studied. First, to optimize the $SiN_x$ film deposition process, $SiH_4$ gas rate and substrate temperature were varied and then refractive index and thickness were measured. When $SiH_4$ gas rate was 22sccm and substrate temperature was $100^{\circ}C$, refractive index was 1.94 and higher than that of other process conditions. Second, the lifetime was measured by varying the annealing temperature and time. The annealing process was made from 5 to 30 minutes at $300{\sim}500^{\circ}C$. When the annealing temperature was $100^{\circ}C$ and time was 10minute, the lifetime was the highest. The lifetime of annealed samples was also measured after the firing process at $975^{\circ}C$. Although the lifetime of all samples was decreased by firing process, the lifetime of annealed samples before the firing process was higher than that of fired samples only. Finally, the characteristics of solar cells with HWCVD $SiN_x$ film were measured.

• Journal of applied mathematics & informatics
• /
• 제38권1_2호
• /
• pp.189-200
• /
• 2020

Let G be a simple connected graph with n vertices and m edges. Denote by d₁ ≥ d₂ ≥ ⋯ ≥ d_n > 0 and d(e₁) ≥ d(e₂) ≥ ⋯ ≥ d(e_m) sequences of vertex and edge degrees, respectively. If vertices v_i and v_j are adjacent, we write i ~ j. The general sum-connectivity index is defined as 𝒳_α(G) = ∑_i~j(d_i + d_j)^α, where α is an arbitrary real number. Firstly, we determine a relation between 𝒳_α(G) and 𝒳_α-1(G). Then we use it to obtain some new bounds for 𝒳_α(G).

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2002년도 학술대회지
• /
• pp.478-481
• /
• 2002

현재 국내 건설프로젝트에 EVMS가 도입되어 비용과 공정을 효과적으로 통합하여 관리하고 있으나 EVMS는 선진 외국의 건설환경에 적합한 방법으로서 이 EVMS를 국내에 적용하는 데에는 다소 어려운 점이 발견되고 있다. 본 논문에서는 EVMS에서 최종공사비(EAC)를 예측하는데 사용되고 있는 지수중의 하나인 합성지수(CI)의 가중치 n, m에 대한 통계적 분석을 통하여 신뢰구간상에 나타나는 합성지수(CI)를 검정하여 최종공사비(EAC)를 예측하는데 효과적으로 사용하고자 한다.

• 한국축산시설환경학회지
• /
• 제4권2호
• /
• pp.183-191
• /
• 1998

This study was carried out to elucidate the correlation between Germination Index(G.I.) and CO2 emission for evaluation of the maturity of compost products. 13 compost samples was used for this experiment. The G.I. test was carried out on the basis of T-N 200ppm. As a result of this research, we found that CO2 emission method was good simple indicator for evaluation of maturity of compost materials, in spite of G.I. The obtain results are summarized as follows ; 1. The correlation value between the G.I. and the CO2 emission was R2 = 0.776. 2. The correlation value between EC(Electric Conductivity) and G.I. was R2 =0.7. 3. The equation calculated from G.I. and CO2 emission was G.I. = -16.7(InCO2) - 6.87. 4. From these results, we found the possibility of estimation for the value of G.I.(T-N 200ppm) from CO2 emission volume under specific condition.

• Journal of the Korean Statistical Society
• /
• 제33권3호
• /
• pp.339-351
• /
• 2004

In this paper we generalize and improve the refined Pickands estimator of Drees (1995) for the extreme value index. The finite-sample performance of the refined Pickands estimator is not good particularly when the sample size n is small. For each fixed k = 1,2,..., a new estimator is defined by a convex combination of k different generalized Pickands estimators and its asymptotic normality is established. Optimal weights defining the estimator are also determined to minimize the asymptotic variance of the estimator. Finally, letting k depend upon n, we see that the resulting estimator has a better finite-sample behavior as well as a better asymptotic efficiency than the refined Pickands estimator.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권8호
• /
• pp.2984-3004
• /
• 2015

Designing a new reversible data hiding technique with a high embedding rate and a low compression rate for vector quantization (VQ) compressed images is encouraged. This paper proposes a novel lossless data hiding scheme for VQ-compressed images based on the joint neighboring coding technique. The proposed method uses the difference values between a current VQ index and its left and upper neighboring VQ indexes to embed n secret bits into one VQ index, where n = 1, 2, 3, or 4. The experimental results show that the proposed scheme achieves the embedding rates of 1, 2, 3, and 4 bits per index (bpi) with the corresponding average compression rates of 0.420, 0.483, 0.545, and 0.608 bit per pixel (bpp) for a 256 sized codebook. These results confirm that our scheme performs better than other selected reversible data hiding schemes.

• 한국세라믹학회지
• /
• 제24권2호
• /
• pp.170-178
• /
• 1987

Changes of the properties of PECVD-SiN film with the variation of deposition process parameters were investigated and optimum process parameters were determined. The refractive index of the film increased with increasing substrate temperature and pressure, and decreasing rf-power, NH3/SiH4 gas ratio and total gas flow. BHF etch rate and deposition rate show a decreasing tendency with increasing refractive index. The step coverage of the film was not affected much by deposition rate and pressure, but improved apparently with increasing rf-power and NH3/SiH4 gas ratio. Also the optimum process parameters were determined by considering the characteristic properties as well as thickness uniformity of films. The refractive index of the film deposited under this condition was 2.06.

• 한국지반환경공학회 논문집
• /
• 제10권3호
• /
• pp.37-45
• /
• 2009

대구지역에 분포하는 고유이방성 셰일(shale)의 점재하지수 및 일축․압축강도 특성을 평가하기 위한 일련의 실험실 시험을 수행하였다. 또한 시험시편의 크기효과 및 형태효과를 조사하기 위하여 축방향 및 직경방향으로 점재하지수를 측정하였다. 일반적으로 직경방향의 점재하지수는 길이/직경(L/D)비가 대략 1.0 이상일때 일정한 값을 보이고 축방향 점재하 시험 결과 L/D비의 증가에 따라 평균 점재하지수가 약간 감소하는 경향을 보였으며 L/D비가 1.0 이상이면 corner파괴가 발생하였다. 최소의 점재하지수는 층리면이 연직과 이루는 각 ($\beta$)이 $15^{\circ}{\sim}30^{\circ}$에서 나타났고 ${\beta}=30^{\circ}$에서 최소의 일축압축강도가 얻어졌다. $\beta$ 값의 범위가 $0^{\circ}{\sim}90^{\circ}$인 시편의 점재하지수와 일축압축강도를 측정하여 이들의 상호관계를 회귀분석하였다. 층리면을 $0^{\circ}$에서 $90^{\circ}$까지 변화시키면서 측정한 점재하지수는 일축압축강도와 선형적인 관계인 ${\sigma}_c=25.0 I_{s(50)}$로 나타났다. 한편, 층리각($\beta$)를 90${^{\circ}}$로 고정시킨 상태에서의 이들의 상관성은 ${\sigma}_c=14.4 I_{s(50)}$로 나타났는데, 이는 ISRM(1985)에서 추천하는 층리가 없는 무결암 시료에 대한 일반적인 상관성, ${\sigma}_c=22 I_{s(50)}$과는 많은 차이가 있음을 확인하였다. 일축압축강도의 이방성 모형은 기존의 Ramamurthy(1993)이론에 지수 'n'을 도입하여 n= 3을 적용 했을때 측정결과와 잘 부합되는 결과를 얻었다.

• Korean Journal of Mathematics
• /
• 제5권2호
• /
• pp.119-125
• /
• 1997

We show that there exists an isomorphism between the basic construction $(M_f)_1$ for $N_f{\subset}M_f$ and the reduction $(M_1)_f$ of the basic construction $M_1$ for $N{\subset}M$, where $f$ is a nontrivial projection in N. For a nontrivial projection $f{\in}N^{\prime}{\cap}M$ we give the basic construction $(M_f)_1$ for $N_f{\subset}M_f$ and compare it with $(M_1)_f$.