• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.4
• /
• pp.199-203
• /
• 2017

$ZrO_2/PSS$ thin film with a high refractive index was fabricated on a glass substrate by a layer-by-layer self-assembly method. The surface morphology and thickness of the fabricated $ZrO_2/PSS$ thin films were measured as a function of the number of $(ZrO_2/PSS)n$. As the number of $(ZrO_2/PSS)n$ increased from n = 5 to n = 20, RMS roughness decreased from 29.01 nm to 8.368 nm. The $ZrO_2$ thin films exhibited high transmittance of 85% or more; and the 15-bilayer thin film exhibited the highest transmittance among the samples. The transmittance of the fabricated $(ZrO_2/PSS)_{15}$ thin film was ca. 90.8% in the visible range. The refractive index of the glass substrate coated by a $(ZrO_2/PSS)_{15}$ thin film with a thickness of 160 nm increased from ca. 1.52 to 1.74 at the 632 nm wavelength.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.448-454
• /
• 2012

A poly(amic acid) (PAA) was prepared by reaction of 4,4'-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) and 2,2-bis[4-(4-aminophenoxy)phenyl]hexafluropropane (BAPP) in N,N-dimethylacetamide (DMAc). The cast films of the synthesized PAA were thermally treated at different temperatures to create polyimide (PI) films. The heat treatment temperature varied between 80 and $230^{\circ}C$ to investigate the imidization index in relation with the solvent evaporation rates. The progress of PAA imidization was examined using a thermogravimetric analyzer (TGA) and a Fourier transform infrared spectroscope (FTIR) at various time and temperature. The experimental results showed that the imidization index was fast at the initial stage in the presence of solvent, DMAc, reaching the final imidization. When the imidization temperature is high over $200^{\circ}C$, the imidization index decreased because the solvent was evaporated too fast.

• Journal of Korean Medicine Rehabilitation
• /
• v.20 no.2
• /
• pp.129-143
• /
• 2010

Objectives : This study examined search on how the obesity indices, that are largely used in clinics such as waist circumference(WC), body mass index(BMI) and waist-hip ratio(WHR), are related to the visceral fat that was measured from abdominal computed tomography(CT) and the ratio of visceral fat/subcutaneous fat. Then, two groups ware compared in order to find out which characteristics of ordinary adults relationship with the abdominal obesity. Two groups are divided as follows; ones who are obese based on the measurement of WC and the others who are obese based on the level of BMI. Methods : A group of 63 test subjects that were gathered in the oriental medical hospital of Kyung-Won university is divided into two groups; ones (n=51, general obesity; group A) who have $BMI{\geq}25$ and $WC{\geq}85$, and the others (n=12, abdominal obesity; group B) who have BMI<25 and $WC{\geq}85$. Then, each group's obesity indices, abdominal CT, lipid level, glucose, adiponectin, leptin and C-reactive protein(CRP) are compared. In addition, subjects are again divided into two to examine the characteristics; ones (n=14, visceral obesity; group C) with visceral obesity based on the ratio between visceral fat and subcutaneous fat measured through abdominal CT, and the others (n=38, non-visceral obesity; group D) who are obese but not viscerally obese. Results & Conclusions : As a measurement that applies abdominal visceral fat and subcutaneous fat, BMI and WC can be considered as an appropriate obesity index while WHR cannot appropriately apply the abdominal fat amount. Moreover, the study indicates that abdominal obesity group based on the ratio of visceral fat/subcutaneous fat has more significant difference than the abdominal obesity group based on the WC in case of blood lipid index.

• Journal of Sensor Science and Technology
• /
• v.29 no.3
• /
• pp.172-179
• /
• 2020

We studied an integrated-optic biosensor configuration that operates at a wavelength of 0.63 ㎛ based on the evanescent-wave and two horizontal mode power coupling of Si₃N₄ rib-optical waveguides formed on a Si/SiO₂/Si₃N₄/SiO₂ multilayer thin films. The sensor consists of a single-mode input waveguide, followed by a two-mode section which acts as the sensing region, and a Y-branch output for separating the two output waveguides. The coupling between the two propagating modes in the sensing region produces a periodically repeated optical power exchanges along the propagation. A light power was steered from one output channel to the other due to the change in the cladding layer (bio-material) refractive index, which affected the effective refractive index (phase-shift) of two modes through evanescent-wave. Waveguide analyses based on the rib optical waveguide dimensions were performed using various numerical computational software. Sensitivity values of 12~23 and 65~165 au/RIU, respectively for the width and length of 4 ㎛, and 3841.46 and 26250 ㎛ of the two-mode region corresponding to the refractive index range 1.36~1.43 and 1.398~1.41, respectively, were obtained.

• Korean Journal of Community Nutrition
• /
• v.29 no.1
• /
• pp.34-50
• /
• 2024

Objectives: Transformation through a sustainable food system to provide healthy diets is essential for enhancing both human and planetary health. This study aimed to explain about sustainable diets and illustrate appropriate measurement of adherence to sustainable diets using a pre-existing index. Methods: For literature review, we used PubMed and Google Scholar databases by combining the search terms "development," "validation," "sustainable diet," "sustainable diet index," "planetary healthy diet," "EAT-Lancet diet," and "EAT-Lancet reference diet." For data presentation, we used data from National Health and Nutrition Examination Survey, 2017-2018, among adults aged 20 years and older (n = 3,920). Sustainable Diet Index-US (SDI-US), comprising four sub-indices corresponding to four dimensions of sustainable diets (nutritional quality, environmental impacts, affordability, and sociocultural practices), was calculated using data from 24-hour dietary recall interview, food expenditures, and food choices. A higher SDI-US score indicated greater adherence to sustainable diets (range: 4-20). This study also presented SDI-US scores according to the sociodemographic status. All analyses accounted for a complex survey design. Results: Of 148 papers, 16 were reviewed. Adherence to sustainable diets fell into 3 categories: EAT-Lancet reference diet-based (n = 8), Food and Agriculture Organization (FAO) definition-based (n = 4), and no specific guidelines but including the sustainability concept (n = 4). Importantly, FAO definition emphasizes on equal importance of four dimensions of diet (nutrition and health, economic, social and cultural, and environmental). The mean SDI-US score was 13 out of 20 points, and was higher in older, female, and highly educated adults than in their counterparts. Conclusions: This study highlighted that sustainable diets should be assessed using a multidimensional approach because of their complex nature. Currently, SDI can be a good option for operationalizing multidimensional sustainable diets. It is necessary to develop a Korean version of SDI through additional data collection, including environmental impact of food, food price, food budget, and use of ready-made products.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.1
• /
• pp.146-158
• /
• 1996

The WKB method has been widely used in evaluating of the propagation characteristics of planar waveguides with graded-index profiles. This method, however, yields large errors when a turning point is near or at the discontinuity in the presence of the index discontinuity or index slope discontinuity. Especially, in the case of a truncated-index profile, this phenomenon appears more clearly in the low-order modes and near the cutoff regions. The MWKB method is introduced to reduce these inherent errors of the conventional WKB method. The MWKB method is based on both the linearization of the index profile from an index discontinuity and the introduction of a virtual turning point. It is noticed that the b-v curves obtained by the MWKB method agree well with those of the finite-difference method, and that the phase shift at a turning point depends on both the index profile and its propagation constant. (author). refs., figs.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.5
• /
• pp.41-49
• /
• 2012

In this study, laboratory test, in-situ vane shear test and piezocone penetration test in the study area were conducted to investigate the engineering characteristics of soft soils at Cheongra District, Songdo District in Incheon City, the west coast of Gyeonggi province, and Sihwa District in Ansan city. The correlations among compression index, and in-situ vane shear test, and cone resistance were obtained. The variations of liquid limit, plasticity index, water content and compression index with respect to depth exhibit strong similarity. This means that they have strong correlations, which can be used to evaluate the local characteristics of the study area. Thus, the correlations between compression index and physical properties were analysed to investigate the engineering characteristics of soft soil in the study area. The relationships between the measured piezocone factor by empirical methods, and undrained shear strength obtained by triaxial compression test or in-situ vane shear test were compared. It shows the significant correlation and piezocone factors, $N_{kT}$are suggested for the study area.

• Environmental Engineering Research
• /
• v.22 no.1
• /
• pp.31-39
• /
• 2017

The primary purpose of this research is to understand those elements that define heavy metals contamination and to propose a novel assessment method based on principal component analysis (PCA) in the Yangping River region of Lingbao City, China. This paper makes detailed calculations regarding such factors the single-factor assessment ($P_i$) and Nemerow's multi-factor index ($P_N$) of heavy metals found in the surface water of the Yangping River. The maximum values of $P_i$ (Cd) and $P_i$ (Pb) were determined to be 892.000 and 113.800 respectively. The maximum value of $P_N$ was calculated to be 639.836. The results of Pearson's correlation analysis, hierarchical cluster analysis, and PCA indicated heavy metal groupings as follows: Cu, Pb, Zn and As, Hg, Cd. The PCA-based pollution index ($P_{an}$) of samplings was subsequently calculated. The relative coefficient square was valued at 0.996 between $P_{an}$ and $P_N$, which indicated that $P_{an}$ is able to serve as a new heavy metal pollution index; not only this index able to eliminate the influence of the maximum value of $P_i$, but further, this index contains the principal component elements needed to evaluate heavy metal pollution levels.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.4
• /
• pp.317-325
• /
• 2021

In order to monitor the occurrence of chigger mites, collectors were installed at four places: rice field, field, waterway, and grass field. Totally, 207 chigger mites belonging to 7 species were collected. Starting with 2 mites in the 5 weeks of September, a maximum of 49 mites were collected during 3 weeks of November. Totally, 81, 52, 47 and 27 mites were collected from grass field, waterways, rice field, and field, respectively. Analysis of sampling and collecting chigger mites determined that the most encountered species was Neotrombicula kwangneun (73, 35.3%), followed by Leptotrombidium palpale (46, 22.2%), N. tamiyai (41, 19.8%) and N. asakawai (27, 13.0%). The grab results of 44 wild rodents revealed Apodemus agrarius (35, 79.5%), Crocidura spp. (5, 11.4%), Craseomys regulus (2, 4.5%), and A. peninsulae (2, 4.5%; which had not been detected previously). A total of 6,628 chigger mites were collected from rodents, and the chigger index was determined to be 150.6. Chigger index was found to be highest at 234.2 in October, followed by 223.3 in November, 75.6 in April, and 66.2 in May. PCR from all chigger mite samples tested negative for the Tsutsugamushi pathogen.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.535-541
• /
• 2005

It has been suggested that the endoscopic color of intramucosal gastric carcinoma is correlated with mucosal vascularity within the carcinomatous tissue. The development of electronic endoscopy has made it possible to quantitatively measure the mucosal hemoglobin volume, using a hemoglobin index. The aim of this study was to make a software program to calculate the hemoglobin index (IHb) and then investigate whether the mucosal IHb determined from the electronic endoscopic data is a useful marker for evaluating the color of intramucosal gastric carcinoma, in particular with regard to its value for discriminating between the histologic type. The mean values of IHb for the carcinoma (IHb-C) and the mean values of IHb for the surrounding non-cancerous mucosa ( IHb-N) were calculated in 75 intestinal-type and 34 diffuse-type gastric carcinomas. Then, we analyzed the ratio of the IHb-C to IHb-N. The mean IHb-C/IHb-N ratio in the intestinal-type carcinoma group was higher than that in the diffuse-type carcinoma group ($1.28{\pm}0.19$ vs. $0.81{\pm}0.18$, respectively, p<0.001). When the cut-off point of the C/N ratio was set at 1.00, the accuracy rate, the sensitivity, the specificity, and the positive and negative predictive values of a C/N ratio below 1.00 for the differential diagnosis of diffuse-type carcinoma from intestinal-type carcinoma were $94.5\%$, $94.1\%$, $94.7\%$, $88.9\%$ and $97.3\%$, respectively. IHb is useful for quantitative measurement of the endoscopic color in intramucosal gastric carcinoma and the IHb-C/IHb-N ratio would be helpful in distinguishing diffuse-type carcinoma from intestinal -type carcinoma.