• Structural Engineering and Mechanics
• /
• v.87 no.4
• /
• pp.297-304
• /
• 2023

Targeted introduction of explosion-resisting and energy-absorbing materials and optimization of explosion-resisting composite structural styles in underground engineering are the most important measures for modern engineering protection. They could also improve the survivability of underground engineering in wartime. In order to test explosion-resisting and energy-absorbing effects of high-performance equal-sized-aggregate (HPESA) concrete, the explosive loading tests were conducted on HPESA concrete composite plates by field simple explosion craters. Time-history curves of the explosion pressure at the interfaces were obtained under six conditions with different explosion ranges and different thicknesses of the HPESA concrete plate. Test results show that under the same explosion range, composite plate structures with different thicknesses of the HPESA concrete plate differ significantly in terms of the wave-absorbing ability. Under the three thicknesses in the tests, the wave-absorbing ability is enhanced with the growing thickness and the maximum pressure attenuation index reaches 83.4%. The energy attenuation coefficient of the HPESA concrete plate under different conditions was regressively fitted. The natural logarithm relations between the interlayer plate thickness and the energy attenuation coefficient under the two explosion ranges were attained.

• Spatial Information Research
• /
• v.10 no.1
• /
• pp.61-76
• /
• 2002

Mobile map services using PDA are prevailing because of the rapid developments of techniques of the internet and handhold devices recently. While the volume of spatial data is tremendous and the spatial operations are time-intensive, the PDA has small size memory and a low performance processor. Therefore, the spatial index for PDA should be small size and efficiently filter out the candidate objects of spatial operation as well. This paper proposes a spatial index far PDA called MHF(Multilevel Hashing File). The MHF has simple structure for storage efficiency and uses a hashing technique, which is direct search method, for search efficiency. This paper also designs a compression technique for MBR. which occupies almost 80% of index data in the two dimensional case. We call it HMBR. Although the HMBR technique reduces the MB\ulcorner size to almost a third, it shows good filtering efficiency because of no information loss by quantization in case of small objects that occupy a major portion. Our experimental tests show that the proposed MHF index using HMBR technique is appropriate for PDA in terms of the size of index, the Number of MBR comparisons, the filtering efficiency and the execution time of spatial operations.

• Journal of the Korean Home Economics Association
• /
• v.44 no.2 s.216
• /
• pp.103-112
• /
• 2006

This study followed the standardization study pool of K-BSID-II to examine the stability of K-BSID-II. One hundred and ninety five infants aged from 1-42 months tested twice with intervals of 5-16 month between tests. All participants had been full-term babies without any medical complications. There were no significant differences between the groups which were divided in terms of demographic variables such as mothers' education, infants' birth order and gender. The stability of K-BSID-II was significant and that of the mental scale was lower than that of the psycho-motor scale: There were high stabilities between raw scores in two sessions(r=.91 for the mental scale and r=.89 for the psycho-motor scale) but there were significant but low correlations between mental index scores(r=.18, p<.05) and psycho-motor index scores(r=.17, p<.05). The stability was increased with initial test age and mothers' education. It was recommended for testers and researchers to use both raw scores and index scores for better interpretations in future research.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.85-94
• /
• 2013

PURPOSES: The performance of tack coat, commonly used for layer interface bonding, is affected by application rate and curing time. In this study, bonding strength tests were performed according to the application rate and curing time of asphalt emulsion. Based on finding from this study, optimum application rates and curing times are proposed. METHODS: In order to investigate bonding characteristic of asphalt emulsion, tests were performed on both asphalt concrete pavement and portland concrete pavement. Also, asphalt emulsions were tested at the application rate of 0, 0.2, 0.4, 0.6, and $0.8{\ell}/m^2$ and at the curing time of 0, 0.5, 1, 2, and 24 hours. Pull-off test and shear bonding strength test, which commonly used for bonding strength measurement of asphalt emulsion, were adopted for this study. To assess field performance under different testing condition, asphalt emulsions were applied to in-service pavement. Throughout coefficient of determination analysis between material index properties from asphalt emulsion and mechanical response from bonding strength tests, performance correlativity was analyzed. RESULTS: Test results show that optimum application rate for asphalt overlay on asphalt concrete pavement (AOA) and asphalt overlay on concrete pavement (AOC) was $0.4{\sim}0.5{\ell}/m^2$ and $0.3{\sim}0.5{\ell}/m^2$, respectively. According to the curing time increment, tensile strength and shear strength of AOC were increased to 22~44% and 20~39%, respectively. AOA case also show strength increment in tensile strength (42%) and shear strength (9%). We tested the applicability of tack coat materials at the field sites, and our findings demonstrated that the bonding (for D and E) and rapid curing (for B, C, and D, E) performances were superior than others. Among material index properties, there was a high correlation between penetration ratio and bonding strength test result. CONCLUSIONS : Result show that interlayer bonding strength was affected by asphalt emulsion type, application rate and curing time. AOC required slightly higher application ($0.1{\ell}/m^2$) than AOA. Both AOA and AOC cases show higher strength at longer curing time. Up to 2hours of curing, rapid strength increments were observed, but strength increment ratio was decreased after 2hours of curing. From the observed correlation between penetration ratio and bonding strength, it is expected that penetration ratio can be used as one of important factors affecting bonding strength analysis.

• Korean Journal of Child Studies
• /
• v.34 no.1
• /
• pp.71-86
• /
• 2013

The purpose of this study was (1) to examine the level of learning disabilities reflected in the written expression and writing performance of at-risk children with ADHD, (2) to investigate the level of differences in writing learning disabilities and writing performance depending on ADHD subtypes, and (3) to explore the error types and contents in the written expression of at-risk children with ADHD. The participants in this study were 46 upper grade elementary school children. They were firstly screened by teacher nomination, and only participants with a K-ARS score of over 17 were then selected to be among the 46 children involved in this study. Two further tests were then carried out : K-LDES as an index of learning disabilities in written expression and BASA-writing as an index of writing performance. The results showed that the at-risk children with ADHD possibly had comorbid writing learning disabilities. They were significantly different in terms of the number of total syllables, errors and correct syllables that they produced, in comparison to normal children. But there were no differences as regards the level of learning disabilities in terms of written expression and writing performance based on ADHD subtypes. As regards the implications of these results for future research, we suggested that there is a need for the identification of comorbid writing learning disabilities in ADHD assessment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.109-110
• /
• 2018

Preloading Strut applied during installation of the wall jack, but additionally serves to minimize the displacement of soil pressure acting upon dissolution due to the difficulty. In this study, we developed an index of support for the release of stress to facilitate the dismantling of the strut uninstall. The refractive support the axial force acting on the strut are supportable, is refracted at minimum load, disassembly should be easy. In order to find the optimal shape and structural stability of the refractive support We have performed the numerical analysis and performance test to determine the final model. We carried out model tests and UTM test in order to understand the refractive performance and durability of the refractive support for optimal model. Results of the test UTM is refracted all shot 5 times within a target hit number, it was found that there is no problem of the refractive performance. Further, the results of model experiments, it was found that to ensure sufficient durability more than the performance target value of the pin joint support structure.

• Spatial Information Research
• /
• v.16 no.1
• /
• pp.113-127
• /
• 2008

This paper proposes an efficient spatial index, named $AR^*$-tree(Area $R^*$-tree) which is a variant of the $R^*$-tree, for mobile software. A MBR(Minimum Bounding Rectangle) structure of the $AR^*$-tree has additional min and max values of area axis as well as x and y axes. The value of area axis is used to determine the significance of a spatial data. If area of a spatial data is large, then it is significant when drawing a map. To reduce complexity of a map on a small screen of mobile device, only significant spatial data can be found by the $AR^*$-tree. The result of a series of tests indicates that the $AR^*$-tree provides a method for control of readability of a map and guarantees an efficient performance at the same time.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.5
• /
• pp.34-42
• /
• 1972

Current noise is an important indication of quality in deposited carbon film resistors. Imperfections in the resistive film create high current densities and consequently high current noise. The magnitude of current noise is depend upon many inherent properties of the resistor such as resistive material and others such as processing, fabrication and packing of resistive elements, etc. Performance tests have definitely established a correlation between current noise and electrical performance of carbon film resistors. To interprete the normal distribution of the current noise index for representative groups of resistors would serve as a powerful tool in judging the Quality control and product uniformity by the manufacturer.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.11a
• /
• pp.275-290
• /
• 2013

The main cause of building fire fatalities occur in the combustible material heat, smoke and toxic gases are. Building interior decoration, etc., especially as much of the harmful substances generated during combustion, and, used in domestic architecture wallpaper, ceiling, and other plastics, built-in foam insulation also analyzed recognition of fire hazards approach to test the conkalrorimiteo test, choedaeyeolbangchulryul through, chongbal heat, mass loss rate, generates carbon monoxide gas hazard ratio tests, analysis and evaluation rigid foam index testing the toxicity of hazardous material generated by performing a gas clean up and assess the material test results, the minimum order to provide data to quantify the risk of fire. Ensure fire safety of building materials, composite materials in order to test the various risk factors could be considered organic to the introduction of testing and evaluation is needed urgently.

• Journal of applied mathematics & informatics
• /
• v.26 no.5_6
• /
• pp.861-876
• /
• 2008

This paper concerns a new method called Fuzzy Supervised Method for error matrix, the method has developed based on Adoptive Neuro- Fuzzy Inference Systems(ANFIS). For the performance point of view initially the new method tested with trial data and then this paper applies the proposed method with real world problems. So that this paper generated 1000 random error matrices in programming language [R] and then it tests the new proposed method for the error matrices. The results of Fuzzy Supervised Method given in terms of Kappa Index and Congalton Accuracy Indexes, and performance of Fuzzy Supervised Method has evaluated by using Pearson's test.