• Advances in Computational Design
• /
• 제6권1호
• /
• pp.31-42
• /
• 2021

This research aims to demonstrate the optimal geometrical design of splayed multiple cross-sectional pin fin heat sinks (SMCSPFHS), which are a type of side-inlet-side-outlet heat sink (SISOHS). The optimiser strength Pareto evolutionary algorithm2 (SPEA2)is employed to explore a set of Pareto optimalsolutions. Objective functions are the fan pumping power and junction temperature. Function evaluations can be accomplished using computational fluid dynamics(CFD) analysis. Design variablesinclude pin cross-sectional areas, the number of fins, fin pitch, thickness of heatsink base, inlet air speed, fin heights, and fin orientations with respect to the base. Design constraints are defined in such a way as to make a heat sink usable and easy to manufacture. The optimum results obtained from SPEA2 are compared with the straight pin fin design results obtained from hybrid population-based incremental learning and differential evolution (PBIL-DE), SPEA2, and an unrestricted population size evolutionary multiobjective optimisation algorithm (UPSEMOA). The results indicate that the splayed pin-fin design using SPEA2 issuperiorto those reported in the literature.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.455-465
• /
• 2021

The Molten Salt Reactor (MSR), one of the six advanced reactor types of the 4th generation nuclear energy systems, has many impressive features including economic advantages, inherent safety and nuclear non-proliferation. This paper introduces a system analysis code named TREND, which is developed and used for the steady and transient simulation of MSRs. The TREND code calculates the distributions of pressure, velocity and temperature of single-phase flows by solving the conservation equations of mass, momentum and energy, along with a fluid state equation. Heat structures coupled with the fluid dynamics model is sufficient to meet the demands of modeling MSR system-level thermal-hydraulics. The core power is based on the point reactor neutron kinetics model calculated by the typical Runge-Kutta method. An incremental PID controller is inserted to adjust the operation behaviors. The verification and validation of the TREND code have been carried out in two aspects: detailed code-to-code comparison with established thermal-hydraulic system codes such as RELAP5, and validation with the experimental data from MSRE and the CIET facility (the University of California, Berkeley's Compact Integral Effects Test facility).The results indicate that TREND can be used in analyzing the transient behaviors of MSRs and will be improved by validating with more experimental results with the support of SINAP.

• Advances in aircraft and spacecraft science
• /
• 제9권3호
• /
• pp.263-278
• /
• 2022

The time-varying structural reliability of an aeroelastic launch vehicle subjected to stochastic parameters is investigated. The launch vehicle structure is under the combined action of several stochastic loads that include aerodynamics, thrust as well as internal combustion pressure. The launch vehicle's main body structural flexibility is modeled via the normal mode shapes of a free-free Euler beam, where the aerodynamic loadings on the vehicle are due to force on each incremental section of the vehicle. The rigid and elastic coupled nonlinear equations of motion are derived following the Lagrangian approach that results in a complete aeroelastic simulation for the prediction of the instantaneous launch vehicle rigid-body motion as well as the body elastic deformations. Reliability analysis has been performed based on two distinct limit state functions, defined as the maximum launch vehicle tip elastic deformation and also the maximum allowable stress occurring along the launch vehicle total length. In this fashion, the time-dependent reliability problem can be converted into an equivalent time-invariant reliability problem. Subsequently, the first-order reliability method, as well as the Monte Carlo simulation schemes, are employed to determine and verify the aeroelastic launch vehicle dynamic failure probability for a given flight time.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.19-29
• /
• 2006

Drying is the least developed of all unit operations of paper and board manufacture. While groundbreaking developments were Introduced during the several past decades in forming, pressing and calendering, no radical changes occurred in drying. The cylinder-drying technology is now more than 200 years old and, while it was subject to many incremental improvements, many of its inherent problems persist. We believe that conventional drying is now approaching the end of its life and the industry is ready for a major breakthrough in drying. Indeed several innovative technologies already exist at various stages of development or commercialization. In general, the novel drying technologies are striving to increase the drying rate, improve the product quality and boost the energy efficiency of drying. A novel, drying method, $Papridry^{TM}$, which combines conductive and convective heat transfer to obtain very high drying rates, is at an advanced stage of development at Paprican. The results obtained when drying printing paper ana board on a self-standing pilot $Papridry^{TM}$ machine and on the pilot paper machine equipped with a tandem of two $Papridry^{TM}$ units demonstrate both, the high drying rate and improved product quality achieved by using this drying method. A mathematical model of this operation has been developed and the software compiled with this model was used to calculate the effect of installing a $Papridry^{TM}$ unit into an existing dryer section. The model also allows to calculate the z-direction distribution of moisture and temperature at various points of the dryer section.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 1998년도 학술대회지 vol.1
• /
• pp.149-161
• /
• 1998

본고에서는 CALS/EC 개발전략의 일환으로 소프트웨어 프로세스 수명주기 중 국제표준인 ISO/IEC 12207과 현재 미 국가 표준으로 채택된 IEEE/EIA 12207에 관하여 고찰해보고, ISO/IEC 12207의 모체라 할 수 있는 미국방성의 소프트웨어 개발 프로세스인 MIL-STD-498과 비교분석 하였다. 또한 현재 국내 국방분야에서 적용하고 있는 소프트웨어 수명주기 프로세스에 조명해보았다. MIL-STD-498을 근간으로 한 국방분야의 소프트웨어 수명주기 프로세스는 그 내용이 아직도 반복개발의 개념이나 프로젝트 특성에 따른 프로세스의 관리 등 새로운 개발 철학들을 수용하고 있지 못한 실정이다. 본 연구에서는 현 국방분야의 소프트웨어 수명주기 프로세스의 개선안으로 프로세스를 재정립한 후, 점진적 개발접근방법, 진화적 개발접근 방법의 수용과 프로세스의 특성에 따라 프로세스들을 선택. 적용할 수 있는 MIL-STD-498을 기반으로 한 테일러링 방법을 제시하였다.

• 중소기업융합학회논문지
• /
• 제6권1호
• /
• pp.7-15
• /
• 2016

현대 사회에서 자동차, 철도, 항공우주, 원자력, 국방 등의 다양한 분야에서 대부분의 장치들이 소프트웨어를 내장하고, 제어용 소프트웨어 시스템이 탑재됨에 따라 소프트웨어의 안전성에 대한 중요도가 높아지고 있다. 다양한 산업 분야에서 소프트웨어가 사용되면서 소프트웨어에 의한 사고의 위협도 높아지기 때문에 소프트웨어 오동작에 의한 안전성 위협이 큰 이슈로 떠오르게 되었다. 소프트웨어의 사고는 사용자의 오조작에 의해서 발생할 수 도 있지만 가장 근본적으로는 설계 과정에서의 안전성에 대한 검증이 제대로 이루어지지 않아서 발생하게 된다. 따라서 본 논문에서는 소프트웨어 개발 프로세스에서 소프트웨어 안전성 분석 및 관리 활동이 어떻게 이루어져야 하는 가를 제시한다. 특별히 프로토타입이나 점진적 개발 프로세스에서의 안전성 분석 및 관리 활동의 적용 방안에 대하여 제시한다.

• Wind and Structures
• /
• 제31권2호
• /
• pp.103-142
• /
• 2020

One of the next frontiers in structural wind engineering is the design of tall buildings using performance-based approaches. Currently, tall buildings are being designed using provisions in the building codes and standards to meet an acceptable level of public safety and serviceability. However, recent studies in wind and earthquake engineering have highlighted the conceptual and practical limitations of the code-oriented design methods. Performance-based wind design (PBWD) is the logical extension of the current wind design approaches to overcome these limitations. Towards the development of PBWD, in this paper, we systematically review the advances made in this field, highlight the research gaps, and provide a basis for future research. Initially, the anatomy of the Wind Loading Chain is presented, in which emphasis was given to the early works of Alan G. Davenport. Next, the current state of practice to design tall buildings for wind load is presented, and its limitations are highlighted. Following this, we critically review the state of development of PBWD. Our review on PBWD covers the existing design frameworks and studies conducted on the nonlinear response of structures under wind loads. Thereafter, to provide a basis for future research, the nonlinear response of simple yielding systems under long-duration turbulent wind loads is studied in two phases. The first phase investigates the issue of damage accumulation in conventional structural systems characterized by elastic-plastic, bilinear, pinching, degrading, and deteriorating hysteretic models. The second phase introduces methods to develop new performance objectives for PBWD based on joint peak and residual deformation demands. In this context, the utility of multi-variate demand modeling using copulas and kernel density estimation techniques is presented. This paper also presents joined fragility curves based on the results of incremental dynamic analysis. Subsequently, the efficiency of tuned mass dampers and self-centering systems in controlling the accumulation of damage in wind-excited structural systems are investigated. The role and the need for explicit modeling of uncertainties in PBWD are also discussed with a case study example. Lastly, two unified PBWD frameworks are proposed by adapting and revisiting the Wind Loading Chain. This paper concludes with a summary and a proposal for future research.

• Asia Marketing Journal
• /
• 제15권2호
• /
• pp.29-47
• /
• 2013

Distribution channel decisions involve long-term commitments with other firms that are very difficult to change or replace. In particular, marketing channel decisions in emerging markets are much more complicated due to unfamiliar conditions and problems such as lack of market data and distribution systems. Therefore, when a company considers changing or introducing a marketing channel in an area, it is much more difficult to judge its effectiveness in an emerging market than in a developed market. In this study, we investigate the development process of a new direct marketing channel of Hongfu Fertilizer Company (hereafter Hongfu), a medium-sized Chinese fertilizer manufacturer, and propose an approach to test the feasibility of this new marketing channel in the Chinese rural market. We measure the effectiveness of Hongfu's new marketing channel from two perspectives: i) from customers' perspective through direct responses of farmers, which showed that a new channel can increase the convenience and lower the purchasing costs for the farmers, and ii) from the company's perspective, by calculating the incremental profit of the company using the expansion factor (T/Q) method, which suggested that the execution of Hongfu's strategy to expand a new marketing channel will result in an increase in profits. The results of this study contribute to the development of a methodology to test the feasibility of a new direct marketing channel in the emerging markets such as the Chinese rural market. Traditional and indirect distribution channels in emerging markets are generally not very efficient and difficult to change. Especially, in emerging markets, like the Chinese rural market, the methods of testing channel feasibility must be different from that of developed markets. Considering market situations, market experiments can be more effective then systematic market surveys in testing channel feasibility in emerging markets. This study implies that managers must learn to cope with a transition from the traditional marketing channels in emerging markets. With the development in farmers' understanding of marketing concept, the transition from traditional marketing channel is unavoidable for all firms. Farmers in China are generally very conservative, however, their buying behaviors are changing. Therefore, fertilizer companies should try to adjust in accordance with farmers' demand characteristics that the efforts to meet the economic needs of farmers with new marketing channels as well as trust building are critical in the near future.

• 치위생과학회지
• /
• 제16권6호
• /
• pp.442-448
• /
• 2016

본 연구는 구강보건교육에 대한 경험, 계속구강건강관리 프로그램 필요성과 참여 의향을 알아보기 위해 2016년 6월 1일부터 8월 3일까지 대전광역시에서 거주하며 치과에서 1회 이상 진료를 받은 경험이 있는 만 19세 이상 성인 중 303명을 편의추출하여 설문조사하였다. 그 결과, 3회 이상 이를 닦는 대상자는 72.6%였으며 구강보조용품을 사용하는 대상자는 55.8%였고 칫솔질 시간이 2분 이상인 대상자는 55.8%였다. 치면착색제 경험은 1일 칫솔질 횟수에 영향을 미쳤으며 치면착색제 경험, 칫솔질 교육, 구강보조용품 사용 교육, 치주질환 예방 교육은 구강보조용품 사용과 1회 칫솔질 시간에 영향을 미쳤다. 계속구강건강관리 프로그램이 필요하다고 생각하는 대상자는 93.1%였으며 계속구강건강관리 프로그램 참여의향은 68.0%였다. 계속구강건강관리 프로그램 1회 참여비용은 1만원 이상 2만원 미만이 70.3%로 가장 많았으며 관리주기는 6개월이 42.6%로 가장 많았다. 계속구강건강관리 프로그램 요구도는 구강세균검사 74.3%, 칫솔질 교육 71.6%, 구취검사 69.3%, 구강보조용품 교육 46.9%, 치면세균막검사 42.9%, 타액검사 37.6% 순이었다. 계속구강건강관리 프로그램 필요성 인지에 영향을 미치는 요인은 고졸 이하에 비해 대졸 이상 4.514배, 구강보조용품을 사용하지 않은 군에 비해 사용하는 군이 2.878배, 칫솔질 시간이 2분 미만군에 비해 2분 이상군이 3.138배 필요성 인지가 높았다. 계속구강건강관리 프로그램 참여 의향에 영향을 미치는 요인은 치주질환 예방 교육 경험이 없는 군에 비해 예방교육 경험이 있는 군이 1.915배 높았으며 구강보조용품 사용을 하지 않는 군에 비해 사용하는 군이 2.065배 높았다. 따라서, 치과에 내원하는 환자에게 지속적으로 구강보건교육을 하는 것이 계속구강건강관리 프로그램에 참여율을 높일 수 있다고 생각되었다. 또한, 구강세균검사나 구취검사 등이 성인 계속구강건강관리 프로그램에 포함되는 것이 추천되며 계속구강건강관리 프로그램이 본인이 부담할 수 있는 적정 비용 수준으로 보험 급여화될 수 있도록 제안해야 한다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권3호
• /
• pp.1865-1877
• /
• 2013

Vertical variations of polycyclic aromatic hydrocarbon (PAH) concentrations in $PM_{10}$ were investigated in order to assess the factors controlling their behavior in the urban atmosphere of Bangkok City, Thailand. Air samples were collected every three hours for three days at three different levels at Bai-Yok Suit Hotel (site-1 and site-2) and Bai-Yok Sky Hotel (site-3) in February $18^{th}-21^{st}$, 2008. The B[a]P concentration showed a value 0.54 fold, lower than the United Kingdom Expert Panel on Air Quality Standard (UK-EPAQS; i.e. 250 pg $m^{-3}$) at the top level. In contrast, the B[a]P concentrations exhibited, at the ground and middle level, values 1.50 and 1.43 times higher than the UK-EPAQS standard respectively. PAHs displayed a diurnal variation with maximums at night time because of the traffic rush hour coupled with lower nocturnal mixing layer, and the decreased wind speed, which consequently stabilized nocturnal boundary layer and thus enhanced the PAH contents around midnight. By applying Nielsen's technique, the estimated traffic contributions at Site-3 were higher than those of Site-1: about 10% and 22% for Method 1 and Method 2 respectively. These results reflect the more complicated emission sources of PAHs at ground level in comparison with those of higher altitudes. The average values of incremental individual lifetime cancer risk (ILCR) for all sampling sites fell within the range of $10^{-7}-10^{-6}$, being close to the acceptable risk level ($10^{-6}$) but much lower than the priority risk level ($10^{-4}$).