Browse > Article
http://dx.doi.org/10.12989/was.2020.31.2.103

Performance-based wind design of tall buildings: concepts, frameworks, and opportunities  

Bezabeh, Matiyas A. (Department of Civil and Environmental Engineering, Western University)
Bitsuamlak, Girma T. (Department of Civil and Environmental Engineering, Western University)
Tesfamariam, Solomon (School of Engineering, University of British Columbia)
Publication Information
Wind and Structures / v.31, no.2, 2020 , pp. 103-142 More about this Journal
Abstract
One of the next frontiers in structural wind engineering is the design of tall buildings using performance-based approaches. Currently, tall buildings are being designed using provisions in the building codes and standards to meet an acceptable level of public safety and serviceability. However, recent studies in wind and earthquake engineering have highlighted the conceptual and practical limitations of the code-oriented design methods. Performance-based wind design (PBWD) is the logical extension of the current wind design approaches to overcome these limitations. Towards the development of PBWD, in this paper, we systematically review the advances made in this field, highlight the research gaps, and provide a basis for future research. Initially, the anatomy of the Wind Loading Chain is presented, in which emphasis was given to the early works of Alan G. Davenport. Next, the current state of practice to design tall buildings for wind load is presented, and its limitations are highlighted. Following this, we critically review the state of development of PBWD. Our review on PBWD covers the existing design frameworks and studies conducted on the nonlinear response of structures under wind loads. Thereafter, to provide a basis for future research, the nonlinear response of simple yielding systems under long-duration turbulent wind loads is studied in two phases. The first phase investigates the issue of damage accumulation in conventional structural systems characterized by elastic-plastic, bilinear, pinching, degrading, and deteriorating hysteretic models. The second phase introduces methods to develop new performance objectives for PBWD based on joint peak and residual deformation demands. In this context, the utility of multi-variate demand modeling using copulas and kernel density estimation techniques is presented. This paper also presents joined fragility curves based on the results of incremental dynamic analysis. Subsequently, the efficiency of tuned mass dampers and self-centering systems in controlling the accumulation of damage in wind-excited structural systems are investigated. The role and the need for explicit modeling of uncertainties in PBWD are also discussed with a case study example. Lastly, two unified PBWD frameworks are proposed by adapting and revisiting the Wind Loading Chain. This paper concludes with a summary and a proposal for future research.
Keywords
performance-based wind design; wind loading chain; damage accumulation; joined fragility curves; copulas; kernel density estimation; incremental dynamic analysis; tuned mass dampers; self-centering systems;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 Priestley, M.N. and Tao, J.R. (1993), "Seismic response of precast prestressed concrete frames with partially debonded tendons", PCI J., 38(1), 58-69.   DOI
2 Saatcioglu, M. and Ozcebe, G. (1989), "Response of reinforced concrete columns to simulated seismic loading", ACI Struct. J., 86(1), 3-12.
3 Saiidi, M.S. and Wang, H. (2006), "Exploratory study of seismic response of concrete columns with shape memory alloys reinforcement", ACI Struct. J., 103(3), 436.
4 Deaves, D.M. (1981), "Computations of wind flow over changes in surface roughness", J. Wind Eng. Ind. Aerod., 7(1), 65-94. https://doi.org/10.1016/0167-6105(81)90068-4.   DOI
5 Deaves, D.M. and Harris, R.I. (1978), A Mathematical Model of the Structure of Strong Winds, Report No. 76, Construction Industry Research and Information Association, London, U.K.
6 DesRoches, R., McCormick, J. and Delemont, M. (2004), "Cyclic properties of superelastic shape memory alloy wires and bars", J. Struct. Eng., 130(1), 38-46. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:1(38).   DOI
7 Dickof, C., Stiemer, S.F., Bezabeh, M.A. and Tesfamariam, S. (2014), "CLT-steel hybrid system: ductility and overstrength values based on static pushover analysis", J. Perform. Construct. Facilit., 28(6), A4014012. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000614.
8 Diniz, S.M. and Simiu, E. (2005), "Probabilistic descriptions of wind effects and wind-load factors for database-assisted design", J. Struct. Eng., 131(3), 507-516. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:3(507).   DOI
9 Dolce, M. and Cardone, D. (2006), "Theoretical and experimental studies for the application of shape memory alloys in civil engineering", J. Eng. Mater. Technol., 128, 302-311. https://doi.org/10.1115/1.2203106.   DOI
10 Dolce, M., Cardone, D. and Marnetto, R. (2000), "Implementation and testing of passive control devices based on shape memory alloys", Earthq. Eng. Struct. Dyn., 29(7), 945-968. https://doi.org/10.1002/1096-9845(200007)29:7%3C945::AID-EQE958%3E3.0.CO;2-%23.   DOI
11 duPlessis, D.P. and Daniels, J.H. (1971), "Performance design of tall buildings for wind", Report No.376.1; Lehigh University, Bethlehem, U.S.A.
12 Eatherton, M.R. and Hajjar, J.F. (2011), "Residual drifts of self-centering systems including effects of ambient building resistance", Earthq. Spectra, 27(3), 719-744.   DOI
13 Samali, B. and Kwok, K.C.S. (1995), "Use of viscoelastic dampers in reducing wind-and earthquake-induced motion of building structures", Eng. Struct., 17(9), 639-654. https://doi.org/10.1016/0141-0296(95)00034-5.   DOI
14 Schneider, J., Shen, Y., Stiemer, S.F. and Tesfamariam, S. (2015), "Assessment and comparison of experimental and numerical model studies of cross-laminated timber mechanical connections under cyclic loading", Construct. Build. Mater., 77, 197-212. https://doi.org/10.1016/j.conbuildmat.2014.12.029.   DOI
15 SEAOC Vision 2000 Committee (1995), Performance-based Seismic Engineering, Structural Engineers Association of California, Sacramento, California, U.S.A.
16 Seo, C.Y. and Sause, R. (2005), "Ductility demands on self-centering systems under earthquake loading", ACI Struct. J., 102(2), 275.
17 Shampine, L.F. and Reichelt, M.W. (1997), "The matlab ode suite", SIAM J. Sci. Comput., 18(1), 1-22. https://doi.org/10.1137/S1064827594276424.   DOI
18 Shen, Y.L., Schneider, J., Tesfamariam, S., Stiemer, S.F. and Mu, Z.G. (2013), "Hysteresis behavior of bracket connection in cross-laminated-timber shear walls", Construct. Build. Mater., 48, 980-991. https://doi.org/10.1016/j.conbuildmat.2013.07.050.   DOI
19 Ellingwood, B. (1998), "Reliability-based performance concept for building construction", Proceedings of the Structural Engineers World Congress, San Francisco, California, U.S.A.
20 Elezaby, F.Y. (2017), "A performance based design approach for tall buildings under wind loading", Masters thesis, Western University, Canada.
21 Ellingwood, B., Galambos, T.V., MacGregor, J.G. and Cornell, C.A. (1980), Development of a Probability-based Load Criterion for American National Standard A58: Building Code Requirements for Minimum Design Loads in Buildings and Other Structures, U.S. Department of Commerce, National Bureau of Standards, U.S.A.
22 Ellingwood, B.R. and Tekie, P.B. (1999), "Wind load statistics for probability-based structural design", J. Struct. Eng., 125(4), 453-463. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:4(453).   DOI
23 Ellingwood, B.R. and Wen, Y.K. (2005), "Risk-benefit-based design decisions for low-probability/high consequence earthquake events in Mid-America", Progr. Struct. Eng. Mater., 7(2), 56-70. https://doi.org/10.1002/pse.191.   DOI
24 Elshaer, A. and Bitsuamlak, G. (2018), "Multiobjective aerodynamic optimization of tall building openings for wind-induced load reduction", J. Struct. Eng., 144(10), 04018198. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002199.   DOI
25 FEMA 274 (1997b), NEHRP guidelines for the seismic rehabilitation of buildings, Federal Emergency Management Agency; Washington, D.C., U.S.A.
26 Fajfar, P. (1999), "Capacity spectrum method based on inelastic demand spectra", Earthq. Eng. Struct. Dyn., 28(9), 979-993. https://doi.org/10.1002/(SICI)10969845(199909)28:9%3C979::AID-EQE850%3E3.0.CO;2-1.   DOI
27 Fardis, M.N. (2018), "Capacity design: early history", Earthq. Eng. Struct. Dyn., 47(14), 2887-2896. https://doi.org/10.1002/eqe.3110.   DOI
28 FEMA 273 (1997a), NEHRP guidelines for the seismic rehabilitation of buildings, Federal Emergency Management Agency; Washington, D.C., U.S.A.
29 FEMA 356 (2000), Pre-standard and commentary for seismic rehabilitation of buildings, Federal Emergency Management Agency; Washington, D.C., U.S.A.
30 Gani, F. and Legeron, F. (2012), "Relationship between specified ductility and strength demand reduction for single degree-of-freedom systems under extreme wind events", J. Wind Eng. Ind. Aerod., 109, 31-45. https://doi.org/10.1016/j.jweia.2012.06.006.   DOI
31 Georgiou, P.N., Vickery, B.J. and Surry, D. (1988), "The effect of non-linear structural behavior on wind-induced plastic damage of low-rise buildings", J. Wind Eng. Ind. Aerod., 29(1), 235-244. https://doi.org/10.1016/0167-6105(88)90161-4.   DOI
32 Ghobarah, A. (2001), "Performance-based design in earthquake engineering: state of development", Eng. Struct., 23(8), 878-884. https://doi.org/10.1016/S0141-0296(01)00036-0.   DOI
33 Glogau, O.A. (1976), "Code philosophy", Bull. New Zealand National Soc. Earthq. Eng., 9(1), 43-55.   DOI
34 Tesfamariam, S., Sanchez-Silva, M. and Rajeev, P. (2013), "Effect of topology irregularities and construction quality on life-cycle cost of reinforced concrete buildings", J. Earthq. Eng., 17(4), 590-610. https://doi.org/10.1080/13632469.2012.762955.   DOI
35 Tieleman, H.W. (2003), "Wind tunnel simulation of wind loading on low-rise structures: a review", J. Wind Eng. Ind. Aerod., 91(12-15), 1627-1649. https://doi.org/10.1016/j.jweia.2003.09.021.   DOI
36 Tominaga, Y., Mochida, A., Yoshie, R., Kataoka, H., Nozu, T., Yoshikawa, M. and Shirasawa, T. (2008), "AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings", J. Wind Eng. Ind. Aerod., 96(10-11), 1749-1761. https://doi.org/10.1016/j.jweia.2008.02.058.   DOI
37 Toranzo-Dianderas, L.A., Restrepo, J.I., Carr, A.J. and Mander, J.B. (2004), "Rocking confined masonry walls with hysteretic energy dissipators and shake-table validation", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada.
38 Herning, G., Garlock, M.M., Ricles, J., Sause, R. and Li, J. (2009), "An overview of self-centering steel moment frames", Structures Congress 2009: Don't Mess with Structural Engineers: Expanding Our Role, Austin, Texas, U.S.A.
39 Haukaas, T. (2008), "Unified reliability and design optimization for earthquake engineering", Probab. Eng. Mech., 23(4), 471-481. https://doi.org/10.1016/j.probengmech.2007.10.008.   DOI
40 Haukaas, T. and Bohl, A. (2009), "Comparison of approaches for performance-based earthquake engineering", Workshop on Performance-based Engineering, Villa Orlandi, Anacapri, Italy.
41 Hollings, J.P. (1969), "Reinforced concrete seismic design", Bull. New Zealand Soc. Earthq. Eng., 2(3), 217-250.   DOI
42 Holmes, J.D. (2015), Wind Loading of Structures, CRC Press, Boka Raton, U.S.A.
43 Hong, H.P. (2004), "Accumulation of wind induced damage on bilinear SDOF systems", Wind Struct., 7(3), 145-158. https://doi.org/10.12989/was.2004.7.3.145.   DOI
44 Hong, H.P. (2016), "Modeling of nonstationary winds and its applications", J. Eng. Mech., 142(4), 04016004. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001047.   DOI
45 Housner, G.W., Bergman, L.A., Caughey, T.K., Chassiakos, A.G., Claus, R.O., Masri, S.F. and Yao, J.T. (1997), "Structural control: past, present, and future", J. Eng. Mech., 123(9), 897-971. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:9(897).   DOI
46 Vickery, B.J., Isyumov, N. and Davenport, A.G. (1983), "The role of damping, mass and stiffness in the reduction of wind effects on structures", J. Wind Eng. Ind. Aerod., 11(1-3), 285-294.   DOI
47 von Karman, T. (1948), "Progress in the statistical theory of turbulence", Proceedings of the National Academy of Sciences of the United States of America, 34(11), 530.   DOI
48 Karacabeyli, E. and Lum, C. (2014), Technical Guide for the Design and Construction of Tall Wood Buildings in Canada, Pointe-Claire, Quebec City, Canada.
49 Judd, J.P. (2018), "Windstorm resilience of a 10-story steel frame office building", ASCE-ASME J. Risk Uncertain. Eng. Syst., Part A: Civil Eng., 4(3), 04018020.   DOI
50 Kaimal, J. (1973), "Turbulence spectra, length scales and structure parameters in the stable surface layer", Bound. Lay. Meteorol., 4(1-4), 289-309. https://doi.org/10.1007/BF02265239.   DOI
51 Kareem, A. (1982), "A crosswind response of buildings", J. Struct. Div., 108(4), 869-887. https://doi.org/10.1016/0141-0296(82)90031-1.   DOI
52 Kareem, A. (1990), "Reduction of wind induced motion utilizing a tuned sloshing damper", J. Wind Eng. Ind. Aerod., 36, 725-737.   DOI
53 Kareem, A. and Gurley, K. (1996), "Damping in structures: its evaluation and treatment of uncertainty", J. Wind Eng. Ind. Aerod., 59(2), 131-157.   DOI
54 Kareem, A. and Sun, W.J. (1990), "Dynamic response of structures with uncertain damping", Eng. Struct., 12(1), 2-8. https://doi.org/10.1016/0141-0296(90)90032-N.   DOI
55 Kareem, A., Bernardini, E. and Spence, S.M. (2013), "Control of the wind induced response of structures", Advan. Struct. Wind Eng., Springer, Tokyo, Japan. https://doi.org/10.1007/978-4-431-54337-4_14.
56 ATC (1996), Seismic evaluation and retrofit of existing concrete buildings, No. ATC-40, Applied Technology Council, Redwood City, U.S.A.
57 Aschheim, M. (2002), "Seismic design based on the yield displacement", Earthq. spectra, 18(4), 581-600. https://doi.org/10.1193%2F1.1516754.   DOI
58 Aschheim, M., Hernandez-Montes, E. and Vamvatsikos, D. (2019), Design of Reinforced Concrete Buildings for Seismic Performance: Practical Deterministic and Probabilistic Approaches, CRC Press.
59 ATC (1978), Tentative provisions for the development of seismic regulations for buildings, No. ATC 3-06, Applied Technology Council, Palo Alto, U.S.A.
60 Baker, J.W. (2015), "Efficient analytical fragility function fitting using dynamic structural analysis", Earthq. Spectra, 31(1), 579-599.   DOI
61 Banik, S.S., Hong, H.P. and Kopp, G.A. (2010), "Assessment of capacity curves for transmission line towers under wind loading", Wind and Structures, 13(1), 1-20.   DOI
62 Barbato, M., Petrini, F., Unnikrishnan, V.U. and Ciampoli, M. (2013), "Performance-based hurricane engineering (PBHE) framework", Struct. Safety, 45, 24-35. https://doi.org/10.1016/j.strusafe.2013.07.002.   DOI
63 Bernardini, E., Spence, S.M., Kwon, D.K. and Kareem, A. (2014), "Performance-based design of high-rise buildings for occupant comfort", J. Struct. Eng., 141(10), 04014244. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001223.   DOI
64 Bertero, R.D. and Bertero, V.V. (2002), "Performance-based seismic engineering: the need for a reliable conceptual comprehensive approach", Earthq. Eng. Struct. Dyn., 31(3), 627-652. https://doi.org/10.1002/eqe.146.   DOI
65 Kim, H.J. and Christopoulos, C. (2008), "Friction damped posttensioned self-centering steel moment-resisting frames", J. Struct. Eng., 134(11), 1768-1779. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:11(1768).   DOI
66 Kareem, A., Kijewski, T. and Tamura, Y. (1999), "Mitigation of motions of tall buildings with specific examples of recent applications", Wind Struct., 2(3), 201-251.   DOI
67 Katsanos, E.I. and Vamvatsikos, D. (2017), "Yield frequency spectra and seismic design of code-compatible RC structures: an illustrative example", Earthq. Eng. Struct. Dyn., 46(11), 1727-1745. https://doi.org/10.1002/eqe.2877.   DOI
68 Kawashima, K. (1997), "The 1996 Japanese seismic design specifications of highway bridges and the performance based design", Proceedings of Seismic Design Methodologies for the Next Generation of Codes, Bled, Slovania, June.
69 Krawinkler, H. and Miranda, E. (2004), "Performance-based earthquake engineering", Earthq. Eng.: From Engineering Seismol. Perform. Based Eng., 9, 1-9.
70 Kurama, Y.C. (2002), "Hybrid post-tensioned precast concrete walls for use in seismic regions", PCI J., 47(5), 36-59. https://doi.org/10.15554/pcij.09012002.36.59.   DOI
71 Kwok, K. and Melbourne, W.H. (1981), "Wind-induced lock-in excitation of tall structures", J. Struct. Div., 107(1), 57-72.   DOI
72 Kwok, K.C.S. (1982), "Cross-wind response of tall buildings", Eng. Struct., 4(4), 256-262. https://doi.org/10.1016/0141-0296(82)90031-1.   DOI
73 Kwon, D.K., Kareem, A., Stansel, R. and Ellingwood, B.R. (2015), "Wind load factors for dynamically sensitive structures with uncertainties", Eng. Struct., 103, 53-62. https://doi.org/10.1016/j.engstruct.2015.08.031.   DOI
74 Singer, I.A. and Raynor, G.S. (1959), "A study of the wind profile in the lowest 400 ft. of the atmosphere", No. BNL-697-T-239, Brookhaven National Lab Upton NY.
75 Mahmoud, H. and Chulahwat, A. (2016), "Multi-hazard multi-objective optimization of building systems with isolated floors under seismic and wind demands", In Gardoni, P. and LaFave, J.M., Multi-hazard Approaches to Civil Infrastructure Engineering, Springer, Berlin, Germany.
76 Miranda, E. (2001), "Estimation of inelastic deformation demands of SDOF systems", J. Struct. Eng., 127(9), 1005-1012. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:9(1005).   DOI
77 Mitrani-Reiser, J., Haselton, C., Goulet, C., Porter, K., Beck, J. and Deierlein, G. (2006), "Evaluation of the seismic performance of a code-conforming reinforced-concrete frame building-part II: loss estimation", The 8th National Conference on Earthquake Engineering (100th Anniversary Earthquake Conference), San Francisco, U.S.A.
78 Moehle, J.P. (1996), "Displacement-based seismic design criteria", Proceedings of the 11th World Conference on Earthquake Engineering, Acapulco, Mexico.
79 Shinozuka, M. and Jan, C.M. (1972), "Digital simulation of random processes and its applications", J. Sound Vib., 25(1), 111-128. https://doi.org/10.1016/0022-460X(72)90600-1.   DOI
80 Simiu, E. and Scanlan, R.H. (1996), Wind Effects on Structures: Fundamentals and Application to Design, John Willey & Sons Inc.
81 Smith, M.A. and Caracoglia, L. (2011), "A Monte Carlo based method for the dynamic fragility analysis of tall buildings under turbulent wind loading", Eng. Struct., 33(2), 410-420. https://doi.org/10.1016/j.engstruct.2010.10.024.   DOI
82 Elshaer, A., Bitsuamlak, G. and El Damatty, A. (2017), "Enhancing wind performance of tall buildings using corner aerodynamic optimization", Eng. Struct., 136, 133-148. https://doi.org/10.1016/j.engstruct.2017.01.019.   DOI
83 Erochko, J., Christopoulos, C., Tremblay, R. and Choi, H. (2010), "Residual drift response of SMRFs and BRB frames in steel buildings designed according to ASCE 7-05", J. Struct. Eng., 137(5), 589-599. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000296.   DOI
84 ESDU 74031 (1974), Characteristics of atmospheric turbulence near the ground, Engineering Sciences Data Unit, U.K.
85 Solari, G. (2017), "Gust buffeting of slender structures and structural elements: simplified formulas for design calculations and code provisions", J. Struct. Eng., 144(2), 04017185. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001949.   DOI
86 Solari, G. and Tubino, F. (2007), "Dynamic approach to the wind loading of structures: alongwind, crosswind and torsional response", Wind Effects Buildings Design Wind Sensitive Struct., 493, 137-166. https://doi.org/10.1007/978-3-211-73076-8_5.   DOI
87 Spence, S.M. and Kareem, A. (2014), "Performance-based design and optimization of uncertain wind-excited dynamic building systems", Eng. Struct., 78, 133-144. https://doi.org/10.1016/j.engstruct.2014.07.026   DOI
88 Spence, S.M.J., Chuang, W.C., Tabbuso, P., Bernardini, E., Kareem, A., Palizzolo, L. and Pirrotta, A. (2016), "Performance-based engineering of wind-excited structures: a general methodology", Geotechnical and Structural Engineering Congress 2016, Phoenix, Arizona, U.S.A.
89 FEMA P695 (2009), Quantification of building seismic performance factors, Applied Technology Council, Redwood City, U.S.A.
90 FEMA P-58-2 (2012), Seismic performance assessment of buildings, Volume 2 - Implementation, Applied Technology Council for the Federal Emergency Management Agency, Washington, D.C., U.S.A.
91 Feng, C. and Chen, X. (2017), "Crosswind response of tall buildings with nonlinear aerodynamic damping and hysteretic restoring force character", J. Wind Eng. Ind. Aerod., 167, 62-74. https://doi.org/10.1016/j.jweia.2017.04.012.   DOI
92 Feng, C. and Chen, X. (2018), "Inelastic responses of wind-excited tall buildings: Improved estimation and understanding by statistical linearization approaches", Eng. Struct., 159, 141-154. https://doi.org/10.1016/j.engstruct.2017.12.041.   DOI
93 Filiatrault, A., Restrepo, J. and Christopoulos, C. (2004), "Development of self-centering earthquake resisting systems", The 13th World Conference on Earthquake Engineering, Vancouver, Canada.
94 Tait, M.J., Isyumov, N. and Damatty, A.A. (2006), "Tuned Liquid Dampers to Mitigate Wind-Induced Motions of Buildings", Structures Congress 2006: Structural Engineering and Public Safety, St. Louis, Missouri, U.S.A.
95 Takeda, T., Sozen, M.A. and Nielsen, N.N. (1970), "Reinforced concrete response to simulated earthquakes", J. Struct. Div., 96(12), 2557-2573.   DOI
96 Tamura, T., Nozawa, K. and Kondo, K. (2008), "AIJ guide for numerical prediction of wind loads on buildings", J. Wind Eng. Ind. Aerod., 96(10-11), 1974-1984. https://doi.org/10.1016/j.jweia.2008.02.020.   DOI
97 Tamura, Y. (1998), "Application of damping devices to suppress wind-induced responses of buildings", J. Wind Eng. Ind. Aerod., 74, 49-72. https://doi.org/10.1016/S0167-6105(98)00006-3.   DOI
98 Tschanz, T. and Davenport, A.G. (1983), "The base balance technique for the determination of dynamic wind loads", J. Wind Eng. Ind. Aerod., 13(1-3), 429-439. https://doi.org/10.1016/0167-6105(83)90162-9.   DOI
99 Tremblay, R. (2002), "Inelastic seismic response of steel bracing members", J. Steel Res., 58(5), 665-701. https://doi.org/10.1016/S0143-974X(01)00104-3.   DOI
100 Tremblay, R., Lacerte, M. and Christopoulos, C. (2008), "Seismic response of multistory buildings with self-centering energy dissipative steel braces", J. Struct. Eng., 134(1), 108-120. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(108).   DOI
101 Tse, K.T., Hitchcock, P.A., Kwok, K.C., Thepmongkorn, S. and Chan, C.M. (2009), "Economic perspectives of aerodynamic treatments of square tall buildings", J. Wind Eng. Ind. Aerod., 97(9-10), 455-467. https://doi.org/10.1016/j.jweia.2009.07.005.   DOI
102 Wen, Y.K. (2001), "Reliability and performance-based design", Struct. Safety, 23(4), 407-428.   DOI
103 Warsido, W.P. (2013), "Reducing uncertainties in estimation of wind effects on tall buildings using aerodynamic wind tunnel tests", Ph.D. Dissertation, Florida International University, U.S.A.
104 Warsido, W.P. and Bitsuamlak, G.T. (2015), "Synthesis of wind tunnel and climatological data for estimating design wind effects: a copula based approach", Struct. Safety, 57, 8-17. https://doi.org/10.1016/j.strusafe.2015.07.004.   DOI
105 Wen, Y.K. (1976), "Method for random vibration of hysteretic systems", J. Eng. Mech. Div., 102(2), 249-263.   DOI
106 Wen, Y.K. and Kang, Y.J. (2001a), "Minimum building life-cycle cost design criteria. I: methodology", J. Struct. Eng., 127(3), 330-337. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:3(330).   DOI
107 Wen, Y.K. and Kang, Y.J. (2001b), "Minimum building life-cycle cost design criteria. II: applications", J. Struct. Eng., 127(3), 338-346. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:3(338).   DOI
108 Wiebe, L. and Christopoulos, C. (2014), "Performance-based seismic design of controlled rocking steel braced frames. II: design of capacity-protected elements", J. Struct. Eng., 141(9), 04014227. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001202.   DOI
109 Wood, D.H. (1982), "Internal boundary layer growth following a step change in surface roughness", Bound. Lay. Meteorol., 22(2), 241-244. https://doi.org/10.1007/BF00118257.   DOI
110 Stanton, J.F., Stone, W.C. and Cheok, G.S. (1997), "A hybrid reinforced precast frames for seismic regions", PCI J., 42(2), 20-32.   DOI
111 Stathopoulos, T. (1984), "Wind loads on low-rise buildings: a review of the state of the art", Eng. Struct., 6(2), 119-135. https://doi.org/10.1016/0141-0296(84)90005-1.   DOI
112 Stathopoulos, T. (1997), "Computational wind engineering: past achievements and future challenges", J. Wind Eng. Ind. Aerod., 67, 509-532. https://doi.org/10.1016/S0167-6105(97)00097-4.   DOI
113 Tabbuso, P., Spence, S.M., Palizzolo, L., Pirrotta, A. and Kareem, A. (2016), "An efficient framework for the elasto-plastic reliability assessment of uncertain wind excited systems", Struct. Safety, 58, 69-78. https://doi.org/10.1016/j.strusafe.2015.09.001.   DOI
114 Tesfamariam, S. and Goda, K. (2015), "Seismic performance evaluation framework considering maximum and residual inter-story drift ratios: application to non-code conforming reinforced concrete buildings in Victoria, Canada", Front. Built Environ., 1, 18. https://doi.org/10.3389/fbuil.2015.00018.
115 Tamura, Y., Kawai, H., Uematsu, Y., Marukawa, H., Fujii, K. and Taniike, Y. (1996), "Wind load and wind-induced response estimations in the Recommendations for Loads on Buildings, AIJ 1993", Eng. Struct., 18(6), 399-411. https://doi.org/10.1016/0141-0296(95)00121-2.   DOI
116 Tamura, Y., Yamada, M. and Yokota, H. (1994), "Estimation of structural damping of buildings", Structures Congress XII, ASCE, Atlanta, Georgia, U.S.A.
117 Tamura, Y., Yasui, H. and Marukawa, H. (2001), "Non-elastic responses of tall steel buildings subjected to across-wind forces", Wind Struct. 4(2), 147-162. https://doi.org/10.12989/was.2001.4.2.147.   DOI
118 Tesfamariam, S., Loeppky, J.L. and Bezabeh, M.A. (2017), "Gaussian process model for maximum and residual drifts of timber-steel hybrid building", Struct. Infrastruct. Eng., 13(5), 554-566. https://doi.org/10.1080/15732479.2016.1175482.   DOI
119 Goda, K. and Tesfamariam, S. (2015), "Multi-variate seismic demand modelling using copulas: Application to non-ductile reinforced concrete frame in Victoria, Canada", Struct. Safety, 56, 39-51. https://doi.org/10.1016/j.strusafe.2015.05.004.   DOI
120 Goda, K. and Hong, H.P. (2010), "Effectiveness of tuned mass dampers for reducing wind-induced plastic deformation", The 9th UK Conference on Wind Engineering, Bristol, U.K.
121 Gomes, L. and Vickery, B.J. (1977), "On the prediction of extreme wind speeds from the parent distribution", J. Wind Eng. Ind. Aerod., 2(1), 21-36. https://doi.org/10.1016/0167-6105(77)90003-4.   DOI
122 Griffis, L., Patel, V., Muthukumar, S. and Baldava, S. (2013), "A framework for performance-based wind engineering", ATC & SEI Conference on Advances in Hurricane Engineering: Learning from Our Past, Miami, U.S.A.
123 Gunay, S. and Mosalam, K.M. (2013), "PEER performance-based earthquake engineering methodology, revisited", J. Earthq. Eng., 17(6), 829-858. https://doi.org/10.1080/13632469.2013.787377.   DOI
124 Ibarra, L.F., Medina, R.A. and Krawinkler, H. (2005), "Hysteretic models that incorporate strength and stiffness deterioration", Earthq. Eng. Struct. Dyn., 34(12), 1489-1511. https://doi.org/10.1002/eqe.495.   DOI
125 ICBO (1976), Uniform Building Code, International Conference of Building Officials; Whittier, California.
126 Foliente, G.C. (1995), "Hysteresis modeling of wood joints and structural systems", J. Struct. Eng., 121(6), 1013-1022. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:6(1013).   DOI
127 Franchin, P., Petrini, F. and Mollaioli, F. (2018), "Improved risk-targeted performance-based seismic design of reinforced concrete frame structures", Earthq. Eng. Struct. Dyn., 47(1), 49-67. https://doi.org/10.1002/eqe.2936.   DOI
128 Fujino, Y. and Abe, M. (1993), "Design formulas for tuned mass dampers based on a perturbation technique", Earthq. Eng. Struct. Dyn., 22(10), 833-854. https://doi.org/10.1002/eqe.4290221002.   DOI
129 Griffis, L.G. (1993), "Serviceability limit states under wind loads", Eng. J.Amer. Institute Steel Const., 30 (1), 1-16.
130 Gumbel, E.J. (1954), "Statistical theory of extreme values and some practical applications", NBS Appl. Mathem. Series, 33.
131 Hamburger, R.O. (1996), "Implementing performance-based seismic design in structural engineering practice", Proceedings of the 11th World Conference on Earthquake Engineering, Acapulco, Mexico.
132 Harris, R. (1968), "On the spectrum and auto-correlation function of gustiness in high winds", No. 5273, Electrical Research Association.
133 Hart, G.C. and Jain, A. (2011), "Nonlinear response of tall buildings subjected to wind loads", Struct. Des. Tall Spec. Build., 20(S1), S63-S65.
134 Tsijuta O., Hayabe, Y., Ohkuma T. and Wada A. (1996), "A study on wind-induced response characteristics and prediction for inelastic structure: part 1. a case of across-wind vibration", J. Struct. Construct. Eng., (Transactions of AIJ), 61(481), 9-16.
135 Uma, S.R., Pampanin, S. and Christopoulos, C. (2010), "Development of probabilistic framework for performance-based seismic assessment of structures considering residual deformations", J. Earthq. Eng., 14(7), 1092-1111. https://doi.org/10.1080/13632460903556509.   DOI
136 Vamvatsikos, D. and Aschheim, M.A. (2016), "Performance-based seismic design via yield frequency spectra", Earthq. Eng. Struct. Dyn., 45(11), 1759-1778. https://doi.org/10.1002/eqe.2727.   DOI
137 ISO (International Organization for Standardization). (2009), Wind Actions on Ctructures, ISO 4354, Geneva, Switzerland.
138 Ierimonti, L., Venanzi, I., Caracoglia, L. and Materazzi, A.L. (2019), "Life-cycle cost-based wind design of tall buildings", Conference of the Italian Association for Wind Engineering, Naples, Italy.
139 Irwin, P. (2008), "Bluff body aerodynamics in wind engineering", J. Wind Eng. Ind. Aerod., 96(6-7), 701-712. https://doi.org/10.1016/j.jweia.2007.06.008.   DOI
140 ISO (International Organization for Standardization). (2007), Bases for Design of Structures--serviceability of Buildings and Walkways Against Vibrations, ISO 10137, Geneva, Switzerland.
141 Isyumov, N. (2012), "Alan G. Davenport's mark on wind engineering", J. Wind Eng. Ind. Aerod., 104, 12-24. https://doi.org/10.1016/j.jweia.2012.02.007.   DOI
142 Isyumov, N., Case, P.C., Ho, T.C.E. and Soegiarso, R. (2001), "Wind tunnel model studies to predict the action of wind on the projected 558 m Jakarta Tower", Wind Struct., 4(4), 299-314. https://doi.org/10.12989/was.2001.4.4.299.   DOI
143 ITIC (2016), Cost of Hourly Downtime Soars: 81% of Enterprises Say it Exceeds $ 300K on Average, http://itic-corp.com/blog/2016/08/cost-of-hourly-downtime-soars-81-of-enterprises-say-it-exceeds-300k-on-average.
144 Jensen, M. (1958), "The model-law for phenomena in natural wind", Ingenioren, 2(2), 121-128.
145 Wyatt, T.A. and May, H. (1971), "The ultimate load behaviour of structures under wind loading", Proceedings of the 3rd International Conference on Wind Effects on Buildings and Structures, Tokyo, Japan.
146 Ganey, R., Berman, J., Akbas, T., Loftus, S., Daniel Dolan, J., Sause, R., Ricles, J., Pei, S., van de Lindt, J. and Blomgren, H.E. (2017), "Experimental investigation of self-centering cross-laminated timber walls", J. Struct. Eng., 143(10), 04017135. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001877.   DOI
147 Cermak, J.E. (2003), "Wind-tunnel development and trends in applications to civil engineering", J. Wind Eng. Ind. Aerod., 91(3), 355-370. https://doi.org/10.1016/S0167-6105(02)00396-3.   DOI
148 Chancellor, N., Eatherton, M., Roke, D. and Akbas, T. (2014), "Self-centering seismic lateral force resisting systems: high performance structures for the city of tomorrow", Build., 4(3), 520-548. https://doi.org/10.3390/buildings4030520.   DOI
149 Chen, D. and Davenport, A.G. (2000), "Vulnerability of tall buildings in typhoons", Advan. Struct. Dyn., 2, 1455-1462.
150 Gairola, A. and Bitsuamlak, G. (2019), "Numerical tornado modeling for common interpretation of experimental simulators", J. Wind Eng. Ind. Aerod., 186, 32-48. https://doi.org/10.1016/j.jweia.2018.12.013.   DOI
151 Vickery, B.J. (1966), "On the assessment of wind effects on elastic structures", CE Trans., Inst. Aust., 183-192.
152 van de Lindt, J.W. and Dao, T.N. (2009), "Performance-based wind engineering for wood-frame buildings", J. Struct. Eng., 135(2), 169-177. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:2(169).   DOI
153 van de Lindt, J.W. and Potts, A. (2008), "Shake table testing of a superelastic shape memory alloy response modification device in a wood shear wall", J. Struct. Eng., 134(8), 1343-1352. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:8(1343).   DOI
154 Van der Hoven, I. (1957), "Power spectrum of horizontal wind speed in the frequency range from 0.0007 to 900 cycles per hour", J. Meteorol. 14(2), 160-164. https://doi.org/10.1175/15200469(1957)014%3C0160:PSOHWS%3E2.0.CO;2.   DOI
155 Vickery, B.J. (1970), "Wind action on simple yielding structures", J. Eng. Mech. Div., 96(2), 107-120.   DOI
156 Vickery, B.J. and Steckley, A. (1993), "Aerodynamic damping and vortex excitation on an oscillating prism in turbulent shear flow", J. Wind Eng. Ind. Aerod., 49(1-3), 121-140. https://doi.org/10.1016/0167-6105(93)90009-D.   DOI
157 Yoshie, K., Kitamura, H. and Ohkuma, T. (2005), "A prediction method for response of an elasto-plastic structure to fluctuating wind force based on energy balance", CTBUH New York Conference, U.S.A.
158 Yang, S.C., Liu, T.J. and Hong, H.P. (2017), "Reliability of tower and tower-line systems under spatiotemporally varying wind or earthquake loads", J. Struct. Eng., 143(10), 04017137. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001835.   DOI
159 Yang, T.Y., Moehle, J., Stojadinovic, B. and Der Kiureghian, A. (2009), "Seismic performance evaluation of facilities: methodology and implementation", J. Struct. Eng., 135(10), 1146-1154. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:10(1146).   DOI
160 Yeo, G.L. and Cornell, C.A. (2005), Stochastic Characterization and Decision Bases Under Time-dependent Aftershock Risk in Performance-based Earthquake Engineering, Pacific Earthquake Engineering Research Center, Berkeley, U.S.A.
161 Zeynalian, M., Ronagh, H.R. and Dux, P. (2012), "Analytical description of pinching, degrading, and sliding in a bilinear hysteretic system", J. Eng. Mech., 138(11), 1381-1387. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000442.   DOI
162 Zizmond, J. and Dolsek, M. (2017), "The formulation of risk-targeted behaviour factor and its application to reinforced concrete buildings", Proceedings of the 16th world conference on earthquake engineering, Santiago, Chile.
163 Irwin, P., Denoon, R. and Scott, D. (2013), Wind Tunnel Testing of High-Rise Buildings, CTBUH Technical Guides, Routledge.
164 Wen, Y.K. (1990), Structural Load Modeling and Combination for Performance and Safety Evaluation, Elsevier Science Ltd.
165 Bezabeh, M.A., Bitsuamlak, G.T., Popovski, M. and Tesfamariam, S. (2018a), "Probabilistic serviceability-performance assessment of tall mass-timber buildings subjected to stochastic wind loads: part I-structural design and wind tunnel testing", J. Wind Eng. Ind. Aerod., 181, 85-103. https://doi.org/10.1016/j.jweia.2018.08.012.   DOI
166 Lind, N.C. and Davenport, A.G. (1972), "Towards practical application of structural reliability theory", Probab. Des. RC Build., 31, 63-110.
167 Bezabeh, M.A., Bitsuamlak G. and Tesfamariam, S. (2019a), "The first step towards the performance-based design of wind-excited buildings: A critical examination of ductility demand, hysteretic energy, and control of damage accumulation", 15th International Conference on Wind Engineering (ICWE-15), Beijing, China.
168 Bezabeh, M.A., Bitsuamlak G. and Tesfamariam, S. (2019b), "Controlling hurricane-induced structural damage by tuned mass dampers and self-centering structural systems", 15th International Conference on Wind Engineering (ICWE-15), Beijing, China.
169 Bezabeh, M.A., Bitsuamlak G. and Tesfamariam, S. (2019c), "Performance-based wind design of tall buildings with explicit consideration of damage accumulation", 10th World Congress (CTBUH 2019), Chicago, USA.
170 Bezabeh, M.A., Bitsuamlak G. and Tesfamariam, S. (2019d), "Should we consider the plastic capacity of structural systems in the design of wind-excited buildings? A critical examination of damage accumulation, ductility demand, and hysteretic energy", CSCE Annual Conference - Laval (Greater Montreal), Canada.
171 Bezabeh, M.A., Bitsuamlak, G.T., Popovski, M. and Tesfamariam, S. (2018b), "Probabilistic serviceability-performance assessment of tall mass-timber buildings subjected to stochastic wind loads: part II-structural reliability analysis", J. Wind Eng. Ind. Aerod., 181, 112-125. https://doi.org/10.1016/j.jweia.2018.08.012.   DOI
172 Christopoulos, C. and Pampanin, S. (2004), "Towards performance-based design of MDOF structures with explicit consideration of residual deformations", SET J. Earthq. Technol., 41(1), 53-73
173 Chen, X. and Kareem, A. (2005), "Coupled dynamic analysis and equivalent static wind loads on buildings with three-dimensional modes", J. Struct. Eng., 131(7), 1071-1082. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:7(1071).   DOI
174 Chopra, A.K. (2000), Dynamics of Structures, Prentice Hall, New Jersey, U.S.A.
175 Christidis, A.A., Dimitroudi, E.G., Hatzigeorgiou, G.D. and Beskos, D.E. (2013) "Maximum seismic displacements evaluation of steel frames from their post-earthquake residual deformation", Bull. Earthq. Eng., 11(6), 2233-2248. https://doi.org/10.1007/s10518-013-9490-z.   DOI
176 Christopoulos, C., Filiatrault, A. and Folz, B. (2002), "Seismic response of self-centring hysteretic SDOF systems", Earthq. Eng. Struct. Dyn., 31(5), 1131-1150. https://doi.org/10.1002/eqe.152.   DOI
177 Christopoulos, C., Pampanin, S. and Nigel Priestley, M.J. (2003), "Performance-based seismic response of frame structures including residual deformations part I: single-degree of freedom systems", J. Earthq. Eng., 7(01), 97-118.
178 Mohammadi, A. (2016), "Wind performance based design for high-rise buildings", Ph.D. Dissertation, Florida International University, U.S.A.
179 Mohammadi, A., Azizinamini, A., Griffis, L. and Irwin, P. (2019), "Performance assessment of an existing 47-story high-rise building under extreme wind loads", J. Struct. Eng., 145(1), 04018232. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002239.   DOI
180 Mooneghi, M.A., Irwin, P. and Chowdhury, A.G. (2015), "Exploratory studies on a bilinear aeroelastic model for tall buildings", Proceedings of the 14th International Conference on Wind Engineering, Proto Alegre, Brazil.
181 Ma, F., Zhang, H., Bockstedte, A., Foliente, G.C. and Paevere, P. (2004), "Parameter analysis of the differential model of hysteresis", J. Appl. Mech., 71(3), 342-349. https://doi.org/10.1115/1.1668082.   DOI
182 Hart, G.C. and Jain, A. (2014), "Performance-based wind evaluation and strengthening of existing tall concrete buildings in the Los Angeles region: dampers, nonlinear time history analysis and structural reliability", Struct. Des. Tall Spec. Build., 23(16), 1256-1274. https://doi.org/10.1002/tal.1139.   DOI
183 Hatzigeorgiou, G.D., Papagiannopoulos, G.A. and Beskos, D.E. (2011), "Evaluation of maximum seismic displacements of SDOF systems from their residual deformation", Eng. Struct., 33(12), 3422-3431. https://doi.org/10.1016/j.engstruct.2011.07.006.   DOI
184 Bezabeh, M.A., Tesfamariam, S., Popovski, M., Goda, K. and Stiemer, S.F. (2017), "Seismic base shear modification factors for timber-steel hybrid structure: collapse risk assessment approach", J. Struct. Eng., 143(10), 04017136. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001869.   DOI
185 Lowes, L.N., Mitra, N. and Altoontash, A. (2004), "A beam-column joint model for simulating the earthquake response of reinforced concrete frames", PEER Report No. 2003/10, Pacific Earthquake Engineering Research Center, University of California, Berkeley.
186 Luco, N. and Cornell, C.A. (1998), "Effects of random connection fractures on the demands and reliability for a 3-story pre-Northridge SMRF structure", Proceedings of the 6th US National Conference on Earthquake Engineering, 244, 1-12.
187 Ma, S.M., Bertero, V.V. and Popov, E.P. (1976), "Cyclic shear behavior of R/C plastic hinges", ASCE/EMD Specialty Conference: Dynamic Response of Structures, Los Angeles, CA, USA, March.
188 Ma, X., Krawinkler, H. and Deierlein, G. (2011), Seismic Design, Simulation and Shake Table Testing of Self-Centering Braced Frame with Controlled Rocking and Energy Dissipating Fuses, Stanford University, Stanford, U.S.A.
189 MacRae, G.A. and Kawashima, K. (1997), "Post-earthquake residual displacements of bilinear oscillators", Earthq. Eng. Struct. Dyn., 26(7), 701-716. https://doi.org/10.1002/(SICI)1096-9845(199707)26:7%3C701::AID-EQE671%3E3.0.CO;2-I   DOI
190 MacRae, G.A. and Priestley, M.J.N. (1994), "Precast post-tensioned ungrouted concrete beam-column subassemblage tests", Vol. 94, No. 10, Dept. of Applied Mechanics & Engineering Sciences, University of California, San Diego.
191 Blume, J.A., Newmark, N.M. and Corning, L.H. (1961), Design of Multistory Reinforced Concrete Buildings for Earthquake Motions, Chicago: Portland Cement Association, U.S.A.
192 Bezabeh, M.A., Tesfamariam, S., Stiemer, S.F., Popovski, M. and Karacabeyli, E. (2016), "Direct displacement-based design of a novel hybrid structure: steel moment-resisting frames with cross-laminated timber infill walls", Earthq. Spectra, 32(3), 1565-1585. https://doi.org/10.1193%2F101514EQS159M.   DOI
193 Bitsuamlak, G.T., Stathopoulos, T. and Bedard, C. (2004), "Numerical evaluation of wind flow over complex terrain", J. Aerosp. Eng., 17(4), 135-145. https://doi.org/10.1061/(ASCE)0893-1321(2004)17:4(135).   DOI
194 Blocken, B. (2014), "50 years of computational wind engineering: past, present and future", J. Wind Eng. Ind. Aerod., 129, 69-102. https://doi.org/10.1016/j.jweia.2014.03.008.   DOI
195 Boggs, D.W. and Peterka, J.A. (1989), "Aerodynamic model tests of tall buildings", J. Eng. Mech., 115(3), 618-635. https://doi.org/10.1061/(ASCE)0733-9399(1989)115:3(618).   DOI
196 Botev, Z.I., Grotowski, J.F. and Kroese, D.P. (2010), "Kernel density estimation via diffusion", Annal. Statistics, 38(5), 2916-2957.   DOI
197 Bouye, E., Durrleman, V., Nikeghbali, A., Riboulet, G. and Roncalli, T. (2000), "Copulas for finance - a reading guide and some applications", SSRN 1032533. https://dx.doi.org/10.2139/ssrn.1032533.
198 Nakaki, S.D., Santon, J.F. and Sritharan, S. (1999), "An overview of the PRESS five-story precast test building", PCI J., 44(2), 26-39. http://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=1779093
199 Murakami, S., Mochida, A. and Sakamoto, S. (1997), "CFD analysis of wind-structure interaction for oscillating square cylinders", J. Wind Eng. Ind. Aerod., 72, 33-46. https://doi.org/10.1016/S0167-6105(97)00245-6.   DOI
200 Nakai, M., Hirakawa, K., Yamanaka, M., Okuda, H. and Konishi, A. (2013), "Performance-based wind-resistant design for high-rise structures in Japan", Int. J. High-Rise Build., 2(3), 271-283. https://doi.org/10.21022/IJHRB.2013.2.3.271.
201 Nakashima, M. (1994), "Variation of ductility capacity of steel beam-columns", J. Struct. Eng., 120(7), 1941-1960. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:7(1941).   DOI
202 Nassar, A.A. and Krawinkler, H. (1991), Seismic demands for SDOF and MDOF systems, Report No.95, John A. Blume Earthquake Engineering Center, Stanford University.
203 NBCC (1985), National building code of Canada, National Research Council of Canada; Ottawa, Canada.
204 NBCC (2015), National building code of Canada, National Research Council of Canada; Ottawa, Canada.
205 Alam, M.S., Nehdi, M. and Youssef, M.A. (2009), "Seismic performance of concrete frame structures reinforced with superelastic shape memory alloys", Smart Struct. Syst., 5(5), 565-585.   DOI
206 Abdi, D.S. and Bitsuamlak, G.T. (2014), "Wind flow simulations on idealized and real complex terrain using various turbulence models", Advan. Eng. Softw., 75, 30-41. https://doi.org/10.1016/j.advengsoft.2014.05.002.   DOI
207 AIJ (Architectural Institute of Japan) (2004), Recommendations for Wind Loads on Buildings, AIJ, Tokyo, Japan.
208 Aiken, I.D., Nims, D.K., Whittaker A.S. and Kelly, J.M. (1993), "Testing of passive energy dissipation systems" Earthq. Spectra, 9(3), 335-370. https://doi.org/10.1193%2F1.1585720.   DOI
209 ASCE 41-06 (2006), Seismic rehabilitation of existing buildings, ASCE, Reston, VA, U.S.A.
210 ASCE/SEI (ASCE/Structural Engineering Institute) (2019), Pre-standard for Performance-Based Wind Design, American Society of Civil Engineers, Reston, VA, U.S.A.
211 ASCE/SEI 7-16 (2016), Minimum design loads for buildings and other structures, ASCE/Structural Engineering Institute, Reston, VA, USA.
212 Johansson, M., Linderholt, A., Bolmsvik, A., Jarnero, K., Olsson, J. and Reynolds, T. (2015), Building higher with light-weight timber structures-the effect of wind induced vibrations. In 44th International Congress and Exposition on Noise Control Engineering, The Institute of Noise Control Engineering of the U.S.A., August.
213 Judd, J. and Charney, F. (2015), "Inelastic behavior and collapse risk for buildings subjected to wind loads", Structures Congress 2015, Portland, Oregon, U.S.A.
214 McCormick, J., Aburano, H., Ikenaga, M. and Nakashima, M. (2008), "Permissible residual deformation levels for building structures considering both safety and human elements", Proceedings of the 14th World Conference on Earthquake Engineerin, Beijing, China.
215 Caracoglia, L. (2018), "Unified stochastic dynamic and damage cost model for the structural analysis of tall buildings in thunderstorm-like winds", ASCE-ASME J. Uncertain. Eng. Syst, Part A: Civil Eng., 4(4), 04018043. https://doi.org/10.1061/AJRUA6.0000999.   DOI
216 Cermak, J.E. (1975), "Applications of fluid mechanics to wind engineering-a Freeman Scholar lecture", J. Fluids Eng., 97(1), 9-38.   DOI
217 Cermak, J.E. (1977), "Wind-tunnel testing of structures", J. Eng. Mech. Div., 103(6), 1125-1140.   DOI
218 Melbourne, W.H. (1997), "Predicting the cross-wind response of masts and structural members", J. Wind Eng. Ind. Aerod., 69, 91-103. https://doi.org/10.1016/S0167-6105(97)00163-3.   DOI
219 Merrick, R. and Bitsuamlak, G. (2009), "Shape effects on the wind-induced response of high-rise buildings", J. Wind Eng., 6(2), 1-18.
220 Miller, C.A. and Davenport, A.G. (1998), "Guidelines for the calculation of wind speed-ups in complex terrain", J. Wind Eng. Ind. Aerod., 74, 189-197.   DOI
221 Miller, D.J., Fahnestock, L.A. and Eatherton, M.R. (2012), "Development and experimental validation of a nickel-titanium shape memory alloy self-centering buckling-restrained brace", Eng. Struct., 40, 288-298. https://doi.org/10.1016/j.engstruct.2012.02.037.   DOI
222 Minciarelli, F., Gioffre, M., Grigoriu, M. and Simiu, E. (2001), "Estimates of extreme wind effects and wind load factors: influence of knowledge uncertainties", Probab. Eng. Mech., 16(4), 331-340. https://doi.org/10.1016/S0266-8920(01)00024-8.   DOI
223 Ciampoli, M., Petrini, F. and Augusti, G. (2011), "Performance-based wind engineering: towards a general procedure", Struct. Safety, 33(6), 367-378. https://doi.org/10.1016/j.strusafe.2011.07.001.   DOI
224 Christopoulos, C., Tremblay, R., Kim, H.J. and Lacerte, M. (2008), "Self-centering energy dissipative bracing system for the seismic resistance of structures: development and validation", J. Struct. Eng., 134(1), 96-107. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(96).   DOI
225 Chryssanthopoulos, M.K., Dymiotis, C. and Kappos, A.J. (2000), "Probabilistic evaluation of behaviour factors in EC8-designed R/C frames", Eng. Struct., 22(8), 1028-1041. https://doi.org/10.1016/S0141-0296(99)00026-7.   DOI
226 Chuang, W.C. and Spence, S.M. (2017), "A performance-based design framework for the integrated collapse and non-collapse assessment of wind excited buildings," Eng. Struct., 150, 746-758. https://doi.org/10.1016/j.engstruct.2017.07.030.   DOI
227 Chuang, W.C. and Spence, S.M. (2019), "An efficient framework for the inelastic performance assessment of structural systems subject to stochastic wind loads", Eng. Struct., 179, 92-105. https://doi.org/10.1016/j.engstruct.2018.10.039.   DOI
228 Ciampoli, M. and Petrini, F. (2012), "Performance-based Aeolian risk assessment and reduction for tall buildings", Probab. Eng. Mech., 28, 75-84. https://doi.org/10.1016/j.probengmech.2011.08.013.   DOI
229 CNR-DT 207/2008 (2010), Guide for the Assessment of Wind Actions and Effects on Structures, National Research Council, Rome, Italy.
230 Connolly, T., Loss, C., Iqbal, A. and Tannert, T. (2018), "Feasibility study of mass-timber cores for the UBC tall wood building", Build., 8(8), 98. https://doi.org/10.3390/buildings8080098.   DOI
231 Cornell, C.A. and Krawinkler, H. (2000), "Progress and challenges in seismic performance assessment", PEER Center News, 3(2), 1-3.
232 NBS (National Bureau of Standards) (1977), "Performance criteria resource document for innovative construction", Report No. NBSIR 77-1316, Office of Housing & Building Technology, Washington, D.C.
233 NEHRP (National Earthquake Hazards Reduction Program) (1988), NEHRP Recommended Provisions for the Development of Seismic Regulations for New Buildings, Building Seismic Safety Council, U.S.A.
234 Padgett, J.E., Dennemann, K. and Ghosh, J. (2010), "Risk-based seismic life-cycle cost-benefit (LCC-B) analysis for bridge retrofit assessment", Struct. Safety, 32(3), 165-173. https://doi.org/10.1016/j.strusafe.2009.10.003.   DOI
235 Nims, D.K., Ritcher, P.J. and Bachman, R.E. (1993), "The use of the energy dissipating restraint for seismic hazard mitigation", Earthq. Spectra, 9(3), 467-489. https://doi.org/10.1193%2F1.1585725.   DOI
236 Ocel, J., DesRoches, R., Leon, R.T., Hess, W.G., Krumme, R., Hayes, J.R. and Sweeney, S. (2004), "Steel beam-column connections using shape memory alloys", J. Struct. Eng., 130(5), 732-740. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:5(732).   DOI
237 Ouyang, Z. and Spence, S.M. (2019), "A performance-based damage estimation framework for the building envelope of wind-excited engineered structures", Journal of Wind Engineering and Industrial Aerodynamics, 186, 139-154.   DOI
238 Pagnini, L.C. and Solari, G. (1998), "Serviceability criteria for wind-induced acceleration and damping uncertainties", J. Wind Eng. Ind. Aerod., 74, 1067-1078. https://doi.org/10.1016/S0167-6105(98)00098-1.   DOI
239 Pampanin, S., Christopoulos, C. and Nigel Priestley, M.J. (2003), "Performance-based seismic response of frame structures including residual deformations part II: multi-degree of freedom systems", J. Earthq. Eng., 7(1), 119-147.   DOI
240 Panofsky, H.A. and McCormick, R.A. (1960), "The spectrum of vertical velocity near the surface", Quart. J. Royal Meteorol. Soc., 86(370), 495-503. https://doi.org/10.1002/qj.49708637006.   DOI
241 Cui, W. and Caracoglia, L. (2020), "Performance-based wind engineering of tall buildings examining life-cycle downtime and multisource wind damage", J. Struct. Eng., 146(1), 04019179. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002479.   DOI
242 Costa, A., Romao, X. and Oliveira, C.S. (2010), "A methodology for the probabilistic assessment of behaviour factors", Bull. Earthq. Eng., 8(1), 47. https://doi.org/10.1007/s10518-009-9126-5.   DOI
243 Cui, W. and Caracoglia, L. (2015), "Simulation and analysis of intervention costs due to wind-induced damage on tall buildings", Eng. Struct., 87, 183-197. https://doi.org/10.1016/j.engstruct.2015.01.001.   DOI
244 Cui, W. and Caracoglia, L. (2018), "A unified framework for performance-based wind engineering of tall buildings in hurricane-prone regions based on lifetime intervention-cost estimation", Struct. Safety, 73, 75-86. https://doi.org/10.1016/j.strusafe.2018.02.003.   DOI
245 Dagnew, A.K. and Bitsuamlak, G.T. (2013), "Computational evaluation of wind loads on buildings: a review", Wind Struct., 16(6), 629-660. http://dx.doi.org/10.12989/was.2013.16.6.629.   DOI
246 Dagnew, A.K. and Bitsuamlak, G.T. (2014), "Computational evaluation of wind loads on a standard tall building using LES", Wind Struct., 18(5), 567-598. http://dx.doi.org/10.12989/was.2014.18.5.567.   DOI
247 Davenport A.G. (1970), "Wind loading on tall buildings", Symposium on Wind Effects on High Rise Buildings, Evanston, U.S.A.
248 Davenport, A.G. (1961), "The spectrum of horizontal gustiness near the ground in high winds", Quart. J. Royal Meteorol. Soc., 87(372), 194-211. https://doi.org/10.1002/qj.49708737208.   DOI
249 Davenport, A.G. (1963), "The relationship of wind structure to wind loading, paper 2", Proceedings of the Symposium on Wind Effects on Buildings and Structures, NPL, U.K.
250 Paulay, T. (1977), "Seismic design of ductile moment resisting reinforced concrete frames, columns: evaluation of actions", Bull. New Zealand National Soc. Earthq. Eng., 10, 85-94.   DOI
251 Paulay, T. and Priestley, M.N. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley & Sons Inc., New York, U.S.A.
252 Paulotto, C., Ciampoli, M. and Augusti, G. (2004), "Some proposals for a first step towards a Performance Based Wind Engineering", Proceedings of IFED-International Forum in Engineering Decision Making, Zurich, Switzerland.
253 PEER (2017), Guidelines for Performance-Based Seismic Design of Tall Buildings, (Ver. 2.03), Pacific Earthquake Engineering Research Center Headquarters at the University of California, Berkeley, U.S.A.
254 Petrini, F., Ciampoli, M. and Augusti, G. (2009), "A probabilistic framework for performance-based wind engineering", Proceedings of Fifth European and African Conference on Wind Engineering, Florence, Italy.
255 Piccardo, G. and Solari, G. (2000), "3D wind-excited response of slender structures: closed-form solution", J. Struct. Eng., 126(8), 936-943. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:8(936).   DOI
256 Pollino, M. and Bruneau, M. (2010), "Seismic testing of a bridge steel truss pier designed for controlled rocking", J. Struct. Eng., 136(12), 1523-1532. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000261.   DOI
257 Porter, K. (2015), "A beginner's guide to fragility, vulnerability, and risk", Encyclopedia Earthq. Eng., 235-260.
258 Pozos-Estrada, A., Hong, H.P. and Galsworthy, J.K. (2011), "Reliability of structures with tuned mass dampers under wind-induced motion: A serviceability consideration", Wind Struct., 14(2), 113-131. https://doi.org/10.12989/was.2011.14.2.113.   DOI
259 Davenport, A.G. (1965), "The relationship of wind structure to wind loading", Proceedings of the Conference on Wind Effects on Buildings & Structures, Teddington, U.K.
260 Davenport, A.G. (1964), "Note on the distribution of the largest value of a random function with application to gust loading", Proc. Institu. Civil Eng., 28(2), 187-196. https://doi.org/10.1680/iicep.1964.10112.   DOI
261 Davenport, A.G. (1967), "Gust loading factors", J. Struct. Div., 93(3), 11-34.   DOI
262 Davenport, A.G. (1968), "The dependence of wind loads on meteorological parameter", Wind Effects Build. Struct., 19-82.
263 Davenport, A.G. (1971), "On the statistical prediction of structural performance in the wind environment", ASCE National Struct. Meeting, Baltimore, U.S.A.
264 Davenport, A.G. (1972), "Structural Safety and reliability under wind action", International Conference on Structural Safety and Reliability, Washington, D.C., U.S.A, April.
265 Davenport, A.G. (1975), "Tall buildings - An anatomy of wind risks", Construction in South Africa, December.
266 Davenport, A.G. (1977), "The prediction of risk under wind loading", Proceedings of the 2nd International Conference on Structural Safety and Reliability, Munich, Germany.
267 Davenport, A.G. (1983), "The relationship of reliability to wind loading", J. Wind Eng. Ind. Aerod., 13(1-3), 3-27. https://doi.org/10.1016/0167-6105(83)90125-3.   DOI
268 Priestley, M.N., Sritharan, S., Conley, J.R. and Pampanin, S. (1999), "Preliminary results and conclusions from the PRESSS five-story precast concrete test building", PCI Journal, 44(6), 42-67.   DOI
269 Davenport, A.G. and Hill-Carroll, P. (1986), "Damping in tall buildings: its variability and treatment in design", Building Motion in Wind, Seattle, U.S.A, April.
270 Davenport, A.G. and Isyumov, N. (1967), "The application of the boundary layer wind tunnel to the prediction of wind loading", In Proceedings of the International Research Seminar: Wind Effects on Buildings and Structures, Ottawa, Canada. September.
271 Ramirez, C.M. and Miranda, E. (2012), "Significance of residual drifts in building earthquake loss estimation", Earthq. Eng. Struct. Dyn., 41(11), 1477-1493. https://doi.org/10.1002/eqe.2217.   DOI
272 Restrepo, J.I. (2002), "New generation of earthquake resisting systems", Proceedings of the First fib Congress, Osaka, Japan.
273 Reynolds, T., Harris, R. and Chan, W.S. (2011), "Dynamic response of tall timber buildings to wind load", The 35th Annual Symposium of IABSE/52nd Annual Symposium of IASS/6th International Conference on Space Structures, London, U.K.
274 Rice, S.O. (1944), "Mathematical analysis of random noise", Bell Syst. Tech. J., 23(3), 282-332. https://doi.org/10.1002/j.1538-7305.1944.tb00874.x.   DOI
275 Robertson, L.E. and Naka, T. (Eds.) (1980), Tall Building Criteria and Loading, ASCE Publications.
276 Roshko, A. (1993), "Perspectives on bluff body aerodynamics", J. Wind Eng. Ind. Aerod., 49(1-3), 79-100. https://doi.org/10.1016/0167-6105(93)90007-B.   DOI
277 Ruiz-Garcia, J. and Miranda, E. (2006), "Residual displacement ratios for assessment of existing structures", Earthq. Eng. Struct. Dyn., 35(3), 315-336. https://doi.org/10.1002/eqe.523.   DOI