• Journal of Welding and Joining
• /
• v.18 no.2
• /
• pp.112-118
• /
• 2000

Automobile manufacturers have employed resistance spot welding(RSW) to join steel sheets for structural rigidity of automobile body. Driven by the need to reduce weight and fuel consumption, car companies have been evaluating aluminum intensive vehicles(AIVs) as a way to reduce vehicle weight without downsizing. During the transition from all steel-construction vehicle body to aluminum intensive body, joining aluminum to steel sheets emerges as a serious contender in automobile body. This paper deals with application of transition material to RSW aluminum to steel. Placing transition material insert between the aluminum/steel interface was found very effective to overcome incompatibility between aluminum and steel. Use of transition insert allows for two separate weld nuggets to be formal in their respective aluminum/aluminum and steel/steel interfaces. This RSW process was monitored with the aid of dynamic resistance sampling. Typical patterns in sampled dynamic resistance curves indicated formation of sound nugget.

• Ceramist
• /
• v.21 no.4
• /
• pp.366-377
• /
• 2018

Solid oxide fuel cells (SOFCs) are promising eco-friendly energy conversion system due to their high efficiency, low pollutant emission and fuel flexibility. High operating temperatures, however, leads to the crucial drawbacks such as incompatibility between the components and high thermal stress. Proton-conducting ceramic fuel cells (PCFCs) with proton-conducting oxide (PCO) materials are new types of fuel cells that can solve the problems of conventional SOFCs. Many studies have been proceeded to improve the performance of electrolytes and electrodes, and triple conductive oxides (TCOs) have attracted significant attention as high performance PCFC electrodes.

• Elastomers and Composites
• /
• v.39 no.4
• /
• pp.294-300
• /
• 2004

Mechanical properties of the commingled waste plastics filled with ground rubber tire were studied. To improve adhesion at the interface, trans-octylene rubber(TOR) was added. With increasing the rubber level, first, due to their inherent incompatibility, the tensile and the compressive strength decreased but tensile strain and impact strength increased. Then, as TOR added, the samples showed still the same strain but the tensile, impact, and compressive strength as well increased markedly Variation of the properties by addition of TOR seemed to be attributed to the dual character of TOR.

• Molecules and Cells
• /
• v.45 no.1
• /
• pp.41-50
• /
• 2022

The recently developed correlative super-resolution fluorescence microscopy (SRM) and electron microscopy (EM) is a hybrid technique that simultaneously obtains the spatial locations of specific molecules with SRM and the context of the cellular ultrastructure by EM. Although the combination of SRM and EM remains challenging owing to the incompatibility of samples prepared for these techniques, the increasing research attention on these methods has led to drastic improvements in their performances and resulted in wide applications. Here, we review the development of correlative SRM and EM (sCLEM) with a focus on the correlation of EM with different SRM techniques. We discuss the limitations of the integration of these two microscopy techniques and how these challenges can be addressed to improve the quality of correlative images. Finally, we address possible future improvements and advances in the continued development and wide application of sCLEM approaches.

• Applied Microscopy
• /
• v.50
• /
• pp.12.1-12.11
• /
• 2020

Hot stage microscopy (HSM) is a thermal analysis technique that combines the best properties of thermal analysis and microscopy. HSM is rapidly gaining interest in pharmaceuticals as well as in other fields as a regular characterization technique. In pharmaceuticals HSM is used to support differential scanning calorimetry (DSC) and thermo-gravimetric analysis (TGA) observations and to detect small changes in the sample that may be missed by DSC and TGA during a thermal experiment. Study of various physical and chemical properties such sample morphology, crystalline nature, polymorphism, desolvation, miscibility, melting, solid state transitions and incompatibility between various pharmaceutical compounds can be carried out using HSM. HSM is also widely used to screen cocrystals, excipients and polymers for solid dispersions. With the advancements in research methodologies, it is now possible to use HSM in conjunction with other characterization techniques such as Fourier transform infrared spectroscopy (FTIR), DSC, Raman spectroscopy, scanning electron microscopy (SEM) which may have additional benefits over traditional characterization techniques for rapid and comprehensive solid state characterization.

• Journal of Chest Surgery
• /
• v.57 no.2
• /
• pp.217-219
• /
• 2024

Matching for the rhesus (Rh) blood group is currently not taken into account in the organ allocation system. However, in Rh-mismatched transplantation, the primary concern is the potential for RhD-negative recipients to develop sensitization and produce anti-D antibodies if they receive a transfusion of RhD-positive blood. It is estimated that over 80% of RhD-negative recipients may experience Rh allosensitization when exposed to RhD-positive blood, although this occurrence is less common in recipients of solid organs. In theory, RhD-negative recipients who receive organs from RhD-positive donors are at risk of alloimmunization and the production of anti-D antibodies, which could complicate future blood product transfusions. However, our understanding of the impact of donor-recipient Rh mismatch on transplant outcomes, particularly in heart transplantation, is limited. We report a case of successful Rh-mismatched heart transplantation, which was effectively managed through the use of preoperative RhD immunoglobulin and plasmapheresis.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.3
• /
• pp.98-106
• /
• 2011

This study was performed with the purpose of providing basic data for the improvement of zoning regulations of urban nature park by analyzing the present problem which occurred during last 6 years from the year of 2005 when the program was introduced for the first time. The study was processed first by the analysis of the cases of problems evoked by citizens, second the other problems was delineated by interviews of officials, at last the validity of all of the problems was verified by a group of professionals through delphi method. The results can be summarized as follows. 1. In relation to the designation and management of urban national park areas, designation criteria, designation process, maintenance, laws and regulations and 20 other items were found to be problematic. After Delphi method, 5 items were removed and 2 added. The results showed that there were 17 problematic items in total. 2. Regarding the problem of criteria for designation, which are, lack of priority(weights), lack of objectivity due to the difficulty to use quantitative evaluation method, incompatibility for contaminated land environmental impact assessment, incompatibility of land suitability assessment, lack of detailed field survey standards, lack of national park area standards, and 6 other items. 3. Regarding the problem of designation process, which are, the occurrence of civil appeals for designating a new national park, the needs of feasibility study on the urban national park areas constructed before urban national park guidelines came out, lack of a comprehensive review of the boundaries set when determining national park area management plan, poor temporal and financial conditions for an accurate field survey, and 4 other items. 4. Regarding the problem of maintenance management, which are, lack of management system in each space, lack of effectiveness of Urban Nature Park Area Management Plan among master plans for park and green areas, the occurrence of dual managers due to dual natures such as purpose area and city park, lack of professional manpower to manage park areas, and 4 other items. 5. Regarding the problems of regulation guidelines, which are, lack of separate urban park area management plan, incompatibility of the permitted facilities in the park to the park area standards, lack of feasibility study on urban park areas, and 3 other items.

• Korean Journal of Plant Resources
• /
• v.22 no.5
• /
• pp.467-472
• /
• 2009

This study was conducted to break down the self-incompatibility of Astragalus membranaceus Bunge by old-flower pollination, NaCl and $CO_2$ treatment. The old-flower pollination in green house produced fertilization during the 1st and 2nd day after flowering from early September to early October, but almost no fertilization in late August. The most successful pollination occurred in late September at the 1st day after flowering when pod setting was 33.3% and that of seed set was about 86.2%. The old-flower pollination in field showed pod setting for the control group from late August to early October, but no seed set except the days of mid-September and late September. The most successful pollination occurred in late September during the 2nd day of flowering when the percentage of pod setting was 39% and that of seed set was 94.9%. The wrapping in field set pods from late August to early October, but did not set seeds except in mid and end of September. The percentage of pods was 39% and percentage of seeds was 94.9% about flowering after first day in end of September. by field culture. The best result from NaCl treatment was achieved when 1% NaCl treatment in green house produced 21.3% of pod setting in early October and 66.7% of seed set in late September. In field, NaCl 5% treatment produced best result with 7.3% of pod setting and 90.9% of seed set in mid-September. No differences were observed between the $CO_2$ 700ppm treatment and the control group.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.169-179
• /
• 2007

This study was to compare the microshear bond strength $({\mu}SBS)$ of light- and chemically cured composites to enamel coupled with four 2-step self-etch adhesives and also to evaluate the incompatibility between 2-step self-etch adhesives and chemically cured composite resin. Crown segments of extracted human molars were cut mesiodistally, and a 1 mm thickness of specimen was made. They were assigned to four groups by adhesives used: SE group (Clearfil SE Bond) AdheSE group (AdheSE), Tyrian group (Tyrian SPE/One-Step Plus), and Contax group (Contax) Each adhesive was applied to a cut enamel surface as per the manufacturer's instruction. Light-cured (Filtek Z250) or chemically cured composite (Luxacore Smartmix Dual) was bonded to the enamel of each specimen using a Tygon tube. After storage in distilled water for 24 hours, the bonded specimens were subjected to ${\mu}SBS$ testing with a crosshead speed of 1 mm/minute. The mean ${\mu}SBS$ (n=20 for each group) was statistically compared using two-way ANOVA, Tukey HSD, and t test at 95% level. Also the interface of enamel and composite was evaluated under FE-SEM. The results of this study were as follows ; 1. The ${\mu}SBS$ of the SE Bond group to the enamel was significantly higher than that of the AdheSE group, the Tyrian group, and the Contax group in both the light-cured and the chemically cured composite resin (p < 0.05). 2. There was not a significant difference among the hdheSE group, the Tyrian group, and the Contax group in both the light-cured and the chemically cured composite resin. 3. The ${\mu}SBS$ of the light-cured composite resin was significantly higher than that of the chemically cured composite resin when same adhesive was applied to the enamel (p < 0.05). 4. The interface of enamel and all 2-step self-etch adhesives showed close adaptation, and so the incompatibility of the chemically cured composite resin did not show.

• Korean journal of applied entomology
• /
• v.55 no.2
• /
• pp.177-188
• /
• 2016

The alpha-proteobacterium Wolbachia is one of the most important intracellular symbionts of arthropods. This Gram-negative bacterium is involved in many biological processes and is currently considered as a potential tool for biological control. Wolbachia is a cytoplasmic bacterium, maternally transferred through generations, and to facilitate its success, it has evolved several strategies that manipulate its host reproductive system to increase the number of infected individuals in the host population. The variety of Wolbachia was first recognized using genes wsp, 16S rRNA, ftsZ, gltA and groEL as molecular markers while strain genotypes of Wolbachia are determined of Multilocus sequence typing (MLST) and sequence of amino acid in region, hyper variable regions (HVRs) in protein WSP. Possible uses of the bacteria and their predominant phenotypes in control programs for agricultural pests and human disease vectors have been considered. Phenotypes are known to induce cytoplasmic incompatibility (CI), parthenogenesis induction (PI), feminization (F) and male killing (MK). Finally, applications of the bacterium in control programs of agricultural and medical insect pests have been discussed.