• Journal of the Korean Society for Advanced Composite Structures
• /
• v.3 no.4
• /
• pp.17-26
• /
• 2012

This study presents a governing equations of bending behavior of anisotropic sandwich plates with multi-layered laminated composite faces. Based on zig-zag models for through thickness deformations, the shear deformation of composite faces is included. All edges of plate are assumed to be simply supported. Results of the bending analysis under lateral loads are presented for the influence of various lay up sequences of antisymmetric angle-ply laminated faces. The accuracy of the approach is ascertained by comparing solutions from the sandwich plates theory with composite faces to the laminated plates theory. Since the present analysis considers the bending stiffness of the core and also the transverse shear deformations of the laminated faces, the proposed method showed higher than that calculated according to the general laminated plates theory. The information presented might be useful to design sandwich plates structure with polymer matrix composite faces.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.59.2-59.2
• /
• 2011

We introduce an ongoing project for monitoring total flux density at 22 and 43GHz, linearly polarized flux, and polarization angle at 22GHz of Gamma-ray bright AGN (Active Galactic Nuclei) with KVN (Korean VLBI Network) 21-m radio telescopes. The project started in May, 2011 with an effective monitoring cycle of 4 days, observing four main objects (3C 454.3, BL Lac, 3C 273, and 3C 279). More objects were included in the source list when they had flared in Gamma-ray. In this paper, we report the current status of the project and preliminary results for the monitoring observations.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.11
• /
• pp.3098-3107
• /
• 1994

The central burst defects, so-called chevroning, in wire drawing are analyzed by the rigid-plastic finite element method. The occurrence of central burst defects in wire drawing is estimated by the distribution of the hydrostatic pressure around the central part of the workpiece. It has been possible to obtain numerical boundaries which, in reduction in area vs. semicone angle plane, divide the safe and the danger zones, depending on friction factors and material properties. Based on the results of the analysis, it is suggested that the previous criterion derived from the upper bound analysis should be modified for better prediction of the defects. The back tension and the billet with a spherical hole on the central axis are also included in the analysis of the defects.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.12 no.1
• /
• pp.23-30
• /
• 1975

Because of the simplicity in analysis and design of steel structure, the connections of members are assumed either as perfectly hinged or rigidly fixed. However, a more economical design would result if the effect of restraint in connections were included in analyzing frame structure. From this point of view, stiffness matrices for member with bracketed connections are presented in the form of the stiffness matrices for member with variable moment of inertia, modified by a correction matrix, whose elements are functions of fixity factors of the connections. To obtain fixity factors, the displacements and stress distribution of bracketed connections are investigated by using of the degital computer program, which have been developed to make computing time shorten and the round off errors smaller. The relationship of moments and slip angle in bracketed connections are presented in the form of curves, which can be used in establishing a stiffness matrices for member with bracketed connections.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.04a
• /
• pp.489-496
• /
• 2002

The lateral buckling of a laminated composite beam is studied. A general analytical model applicable to the lateral buckling of a composite beam subjected to various types of loadings is derived. This model is based on the classical lamination theory, and accounts for the material coupling for arbitrary laminate stacking sequence configuration and various boundary conditions. The effects of the location of applied loading on the buckling capacity are also included in the analysis. A displace-based one-dimensional finite element model is developed to predict critical loads and corresponding buckling modes for a thin-walled composite beam with arbitrary boundary conditions. Numerical results are obtained for thin-walled composites under central point load, uniformly distributed load, and pure bending with angle-ply and laminates. The effects of fiber orientation location of applied load, and types of loads on the critical buckling loads are parametrically studied.

• Steel and Composite Structures
• /
• v.3 no.3
• /
• pp.213-229
• /
• 2003

A high precision shear deformable triangular element has been proposed for free vibration analysis of composite trapezoidal plates. The element has twelve nodes at the three sides and four nodes inside the element. Initially the element has fifty-five degrees of freedom, which has been reduced to forty-eight by eliminating the degrees of freedom of the internal nodes through static condensation. Plates having different side ratios (b/a), boundary conditions, thickness ratios (h/a=0.01, 0.1 and 0.2), number of layers and fibre angle orientations have been analyzed by the proposed shear locking free element. Trapezoidal laminate with concentrated mass at the centre has also been analyzed. An efficient mass lumping scheme has been recommended, where the effect of rotary inertia has been included. For validation of the present element and formulation few results of isotropic trapezoidal plate and square composite laminate have been compared with those obtained from open literatures. The numerical results for composite trapezoidal laminate have been given as new results.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.241-246
• /
• 2002

극자외선 노광공정(EUVL: Extreme Ultraviolet Lithography)은 반도체 공정에서 0.1$\mu\textrm{m}$ 이하의 해상도를 실현하기 위해 연구되고 있는 유력한 차세대 노장공정(NGL: Next Generation Lithography)이다. [1] 본 연구에서는 극자외선 노광공정에서 사용되는 반사형 다층박막 미러를 제조하기 위해서 직접 제작한 전산모사 도구를 이용하여 130~135$\AA$의 파장 영역에서 고반사도를 가지는 효율적인 다층박막의 구조인자를 예측하였으며, 그러한 구조인자를 실현하기 위해서 상온(~300K)에서 마그네트론 스퍼터링을 이용하여 다층박막을 증착하였다. 증착조건 중에서, 공정압력에 따른 다층박막 계면 성장의 질적 의존성이 나타났으며, 결과적으로는 낮은 공정압력에서 더좋은 계면특성을 가지는 다층박막이 형성되었다. 다층박막의 구성물질로 Ru, Mo, Si을 사용하였으며, 다층박막의 구조분석은 high/low angle XRD, 단면 TEM images 등을 이용하여 분석되었다.

• Journal of Biomedical Engineering Research
• /
• v.32 no.2
• /
• pp.118-126
• /
• 2011

This study proposes a human body orientation tracking system by inertial and earth magnetic sensors. These sensors were fused by indirect Kalman filter. The proposed tracking system was configured and the filter was implemented. The tracking performance was evaluated with static and dynamic tests. In static test, the sensor was fixed on the floor while its static characteristics was analyzed. In dynamic test, the sensor was held and moved manually for 30 seconds. The dynamic test included x, y, z axis rotations, and elbow flection/extension motions that mimic drinking. For these dynamic motions, the tracking angle error was under $4.1^{\circ}$ on average. The proposed tracking method is expected to be useful for various human body motion analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.5
• /
• pp.91-98
• /
• 2004

Human uses level difference and time difference to get space information. Therefore this paper shows that method to presume direction of sound source by time difference and to mark presumed position. The position means direction from geometrical center of sensors to the sound source. To get the time difference of microphones input level, we will be explained about arrangement of microphones which used for the sensor to take the sound signal. It is included distance among the 3 microphones and distance between microphones and sound source. Secondly, input signals are transmitted to CPU througth digital process. CPU is used to DSP(Digital Signal Processor) for manage the signal by real time. Finally, the position of sound source is perceived by an explained algorithm in this paper.

• Bulletin of the Korean Chemical Society
• /
• v.3 no.1
• /
• pp.9-13
• /
• 1982

Sulfametrole, $C_9H_{10}N_4O_3S_2$, crystallizes in the monoclinic system, space group $P2_1/n$ , with a = 8.145(2), b = 16.505(4), c = 9.637(1)${\AA},{\beta}=103.72(1)^{\circ},D_m=1.52gcm^{-3}$,Z=4.Intensities for 3594(2143 observed) unique reflections were measured on a four-circle diffractometer with Mo $K{\alpha}$ radiation $({\lambda}=0.71069{\AA})$. The structure was solved by direct method and refined by full-matrix least squares to a final R of 0.070. The geometrical features of the thiadiazole ring indicate some ${pi}$-electron delocalization inside the ring. The least squares planes defined by the benzene and thiadiazole rings are nearly perpendicular to each other(dihedral angle; $93.9^{\circ}$ ). All the potential hydrogen-bond donor atoms in the molecule, N(1) and N(2), are included in the hydrogen bonding. The molecules through hydrogen bonding form three dimensional network.