• 산업경영시스템학회지
• /
• 제34권3호
• /
• pp.35-40
• /
• 2011

5-axis laser cutting has great advantages when it is applied to three dimensional machining requiring high cutting quality. For developing 5-axis CNC laser cutting systems, however, many problems such as rotating a laser head or a working table, 5-axis servo-control mechanism, tool path generation and post-processing, and collision avoidance between a laser head and a work-piece should be solved. In this paper, we deal with developing a motion simulator for 5-axis laser cutting machine with a nutating cutting head whose rotational axis is in an inclined plane. Two essential modules such as post-processor and cutting motion simulator was developed based on a commercial 3D CAD of UG-NX. The developed system was applied to three dimensional cutting products and showed the validity of the developed methods.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.433-436
• /
• 2004

The safety of buildings is generally estimated by analyzing a plane frame ignoring a minor bending moment. In this paper, uncertainties of reinforced concrete shear wall subjected to a biaxial bending are considered. First, major parameters are selected from all parameters of general shear wall design to perform a reliability analysis in their practical ranges, means and standard derivations of selected design parameters for the reliability analysis are calculated by a data mining as a simulation method. The bi-section method is used to find inclined neutral axis and its limit state using MATLAB subjected to the concept on strength design method. The reliability index $\beta$ as a safety index is calculated based on AFOSM(Advanced First-Order Second Moment) method. Also, if target reliability index $\beta_T$ is decided by an engineer an amount of reinforcement can be calculated by subtracting the reliability index $\beta$ from the target reliability index $\beta_T$.

• 한국기계가공학회지
• /
• 제20권10호
• /
• pp.50-55
• /
• 2021

In this study, to create circular holes on an inclined conic face, we developed a novel process of vertical piercing on the plane before drawing, instead of applying an expensive cam-piercing method. The pierced holes are deformed during the drawing, and their shapes are affected by the size of the center hole. Using the Abaqus CAE program, the deformation tendency of the holes, according to the diameter of the center hole, was identified, and the diameter for securing the roundness of the side holes were determined through actual experiments. The developed process was successfully applied to mass production of the part, and a cost reduction is expected.

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권4호
• /
• pp.26-29
• /
• 2006

The study to be presented related on initial behavior of quench concerned with many considerations, such as epoxy impregnated coil, critical current density related on strain and temperature, winding effect and behavior of internal superconducting wire. Especially, the deformation behavior of coils under magnetic field and thermal contractions at cryogenic temperatures to be dealt with the analytical method related on Fracture Mechanics. From the results, we know that the strain by self weight contribute to epoxy cracking at the edge of deformed coils and the deformation behavior relate on epoxy cracking must be dealt with biaxial loading problem. Then, the epoxy crack on $r\theta-plane$ under biaxial loading have been propagated with inclined crack angle and joined superconducting wire. Also, we can explain transfer of epoxy crack propagation energy from epoxy resin to superconducting wire.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.746-751
• /
• 2003

A method of measuring the length of defects on the wall of the spent nuclear fuel pool using the image processing and a laser slit beam is proposed. Since the defect monitoring camera is suspended by a crane and hinged to the crane hook, the camera viewing direction can not be adjusted to the orientation that is exactly perpendicular to the wall. Thus, the image taken by the camera, which is horizontally rotated along the axis of the camera supporting beam, is distorted and thus, the precise length can not be measured. In this paper, by using the LASER slit beam generator, the horizontally rotated angle of the camera is estimated. Once the angle is obtained, the distorted image can be easily reconstructed to the image normal to the wall. The estimation algorithm adopts a 3-dimensional coordinate transformation of the image plane where both the laser slit beam and the original image of the defects exist. The estimation equation is obtained by using the information of the beam projected on the wall and the parameters of this equation are experimentally obtained. With this algorithm, the original image of the defect taken at arbitrary rotated angle can be reconstructed to an image normal to the wall. From the result of a series of experiments, the accuracy of the defect is measured within 0.6 and 1.3 % error bound of real defect size in the air and underwater, respectively under 30 degree of the inclined angle of the laser slit beam generator. Also, the error increases as the inclined angle increases upto 60 degree. Over this angle, the defect length can not be measured since the defect image disappears. The proposed algorithm enables the accurate measurement of the defect length only by using a single camera and a laser slit beam.

• 한국전자통신학회논문지
• /
• 제15권1호
• /
• pp.173-178
• /
• 2020

다중-광선 모델을 이용하여 경사면을 갖는 반-협곡 구조에서 전파 전송 손실을 해석하고 경사면의 각도에 따라 나타나는 다중-광선 전파 모델을 공식화 하였다. 경사면의 기울어진 각도에 의해 결정되는 송수신 전파의 경사면 반사경로인 제3경로와 제4경로에 대한 차단 각도를 송수신 단말의 높이와 위치를 가지고 계산하였다. 경사면 환경에서 전파 전송 손실을 예측하기 위하여 실제 경사면이 존재하는 제방 환경을 선택하여 모델링하고 시뮬레이션 하여 전파 전송 손실을 계산하였으며, 주파수 1-6GHz 대역에 대한 측정활동을 통해 전파전송 손실을 확인하였다. 시뮬레이션 결과와 측정 결과는 유사한 전파 전송 손실 경향을 보여주었으며 다양한 지형정보에 대한 전파 경로 손실 예측과 측정 결과들은 다양한 전파 업무 설계에 활용될 수 있다.

• 대한치과교정학회지
• /
• 제10권1호
• /
• pp.15-27
• /
• 1980

This study was undertaken to compare the craniofacial morphology of Class II, Division 1 malocclusion with that of normal occlusion in children, and to investigate the incidence of various Class II, Division 1 craniofacial skeletal patterns. The subjects consist of thirty seven boys and fifty three girls with Class II, Division 1 malocclusion, and forty six boys and eighty one girls 10-15 years with normal occlusion. Measurements were recorded, tabulated and analyzed on the lateral cephalograms by the degree of SNA, SNB and ANB. The following characteristics of the Class II, Division 1 skeletal pattern were observed. 1. The anteroposterior relationship of the maxilla to the cranium in the Class II, Division 1 was very similar to that of normal occlusion. 2, Mandible of the Class II, Division 1 malocclusion was in the posterior position in relation to the cranial anatomy when compared to normal. 3. The chin point as measured by SN Pog and NS Gn showed distal positioning in relation to normal occlusion. 4. SN to mandibular plane angle was large in Class II, Division 1 malocclusion. 5. Mandibular incisor inclination was not significantly different between Class II, Division 1 malocclusion and normal occlusion, but maxillary incisors inclined and positioned labially and consequently overjet was large in Class II, Division 1 malocclusion. 6. Class II, Division 1 malocclusion was divided into four types of craniofacial skeletal pattern. The most common Class II, Division 1 pattern was found to be type C in which SN-Mand. Pl. was above mean range of normal occlusion. The next frequent pattern was found to be type A in which maxilla and mandible were within normal range of protrusion while upper incisors were severly labially inclined.

• 한국강구조학회 논문집
• /
• 제9권2호통권31호
• /
• pp.269-275
• /
• 1997

본 연구에서는 자정식 현수교 주탑의 내풍 안정성을 보기 위하여 주탑 모형 실험과 전교 모형 실험을 수행하고 그 결과를 분석하였다. 경사진 병렬 탑주를 가진 주탑의 경우에는 다양한 주파수대의 웨이크가 존재하므로 넓은 풍속대에서 진동이 발생한다는 사실을 확인하였다. 자정식 현수교의 경우에는 주형의 교축방향 지지조건에 따라 주탑 진동 모드가 매우 민감하게 변화하였다. 본 연구 대상 주탑은 면외 휨 모드와 비틈 모드의 고유진동수가 매우 근접해 있어서 넓은 범위의 풍속에서 연성진동이 발생하였다 주탑 진동을 완화하기 위한 공기역학적 수단으로 모서리 자르기를 시도하였는데, 탑주의 폭과 잘린 모서리의 비가 1/10일 때가 가장 효과적이었다.

• 대한치과교정학회지
• /
• 제47권4호
• /
• pp.256-267
• /
• 2017

Objective: To evaluate transverse skeletal and dental changes, including those in the buccolingual dental axis, between patients with skeletal Class III malocclusion and facial asymmetry after bilateral intraoral vertical ramus osteotomy with and without presurgical orthodontic treatment. Methods: This retrospective study included 29 patients with skeletal Class III malocclusion and facial asymmetry including menton deviation > 4 mm from the midsagittal plane. To evaluate changes in transverse skeletal and dental variables (i.e., buccolingual inclination of the upper and lower canines and first molars), the data for 16 patients who underwent conventional orthognathic surgery (CS) were compared with those for 13 patients who underwent preorthodontic orthognathic surgery (POGS), using three-dimensional computed tomography at initial examination, 1 month before surgery, and at 7 days and 1 year after surgery. Results: The 1-year postsurgical examination revealed no significant changes in the postoperative transverse dental axis in the CS group. In the POGS group, the upper first molar inclined lingually on both sides (deviated side, $-1.8^{\circ}{\pm}2.8^{\circ}$, p = 0.044; nondeviated side, $-3.7^{\circ}{\pm}3.3^{\circ}$, p = 0.001) and the lower canine inclined lingually on the nondeviated side ($4.0^{\circ}{\pm}5.4^{\circ}$, p = 0.022) during postsurgical orthodontic treatment. There were no significant differences in the skeletal and dental variables between the two groups at 1 year after surgery. Conclusions: POGS may be a clinically acceptable alternative to CS as a treatment to achieve stable transverse axes of the dentition in both arches in patients with skeletal Class III malocclusion and facial asymmetry.

• 한국강구조학회 논문집
• /
• 제23권6호
• /
• pp.763-775
• /
• 2011

경사진 평행 병렬 사장재 케이블의 웨이크 갤로핑 발현 특성을 2차원 부분모형을 통하여 규명하였다. 경사진 병렬 사장재를 모사하기 위하여 두 실린더를 나란히 경사배치 하였으며 중심간격 변화에 따른 풍상측 및 풍하측 실린더의 진동을 관찰하였다. 실린더 지름의 여섯 배까지 케이블강교량설계지침의 허용값을 초과하는 진동이 관할되었다. 이는 설계 시 관용적으로 사용되는 검토기준이 비교적 적정함을 의미하는 것이다. 반면, 감쇠의 증가는 웨이크 갤로핑의 발현을 억재하는 데 효과적이지 않음을 확인할 수 있었다.