• Journal of Interdisciplinary Genomics
• /
• v.1 no.2
• /
• pp.19-22
• /
• 2019

CATCH 22 syndrome is rare genetic disease that has various manifestations. Cervical vertebral anomaly, such as Klippel-Feil anomaly, is frequently observed in the patients with CATCH22 syndrome. We present the case of an 11-year-old female patient with CATCH22 syndrome and Klippel-Feil anomaly who had been treated torticollis using the customized soft neck collar. During the patient's first visit to our clinic, she presented with low ear set, skull deformity, intellectual disability, and tilting of the head to the left by approximately 25 degrees. Imaging studies revealed multisegmental fusion and C3 hemivertebrae of the cervical spine and left thoracic scoliosis at T4 with 50 degrees of Cobb's angle. We instructed passive stretching and applied the customized soft neck collar we invented. The ipsilateral aspect of the neck collar is designed to provide vertical support between the clavicle and mandibular angle and is adjustable in height. The Velcro was attached to the neck collar at the point of contact with the ipsilesional mandibular angle, which provides negative sensory feedback, inducing her to tilt neck to the contralesional side. We applied the neck collar for 2 hours a day. After 1 year of treatment, her neck inclination angle improved from 25 to 10 degrees. Providing negative sensory feedback using the customized soft neck collar can be one of the treatment options of postural management in patients with torticollis in cases of CATCH 22 syndrome combined with Klippel-Feil anomaly.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.11
• /
• pp.251-256
• /
• 2022

In this paper, we propose the effects of coordinative locomotor training in body alignment of high school baseball players. Coordinative locomotor training was applied to 20 subjects in the experimental group for 30 minutes, 5timess aweek for 4 weeks. Body alignmen was measured using a formertic, and variables representing body alignment included trunk inclination, trunk imbalance, pelvic tilt, pelvic torson, kyphotic angle and lordotic angle. The results of this study were as follows: As for the Body alignment, there were significantly increased in kyphotic angle and lordotic angle in the experimental group. From the above results, it seems that coordinative locomotor training has a positive effects on the body alignment of high school baseball players. The coordinative locomotor training was able to produce confirmation that body alignment change in the case of effective exercise interventions in high school baseball players. Coordinative locomotor training is thought to be effective in preventing physical imbalance in high school baseball.

• Imaging Science in Dentistry
• /
• v.52 no.4
• /
• pp.365-373
• /
• 2022

Purpose: This study investigated whether the relationship between the maxillary sinus and the root of the maxillary premolar is correlated with the root position and whether there is a difference in the long axis angle of premolars and the buccal bone thickness according to the sinus-root relationship and root position. Materials and Methods: Cone-beam computed tomographic images of 587 maxillary first premolars and 580 second premolars from 303 patients were retrospectively reviewed. The maxillary sinus floor-root relationship was classified into 4 types, and the root position in the alveolar bone was evaluated as buccal, middle, or palatal. The long axis angle of the maxillary premolars in the alveolar bone and the buccal bone thickness were measured. The correlation between these parameters was analyzed. Results: The maxillary sinus floor-root relationship showed a statistically significant correlation with the root position in the alveolar bone. Most maxillary first premolars were buccally located, and more than half of the second premolars had their roots in the middle. The long axis angle of the premolars was significantly larger in buccal-positioned teeth than in middle-positioned teeth, and the buccal bone was thinner. Conclusion: When the root of the maxillary premolar was separated from the sinus floor, the premolar was often located on the buccal side. Most of the maxillary first premolars had a thinner buccal bone and larger inclination than the second premolars. It is recommended to evaluate the root position, sagittal angle and buccal bone thickness using CBCT for implant treatment planning.

• Journal of applied mathematics & informatics
• /
• v.41 no.1
• /
• pp.51-70
• /
• 2023

The flow of an incompressible Ellis fluid in an inclined asymmetric channel, driven by peristaltic waves was studied under low Reynolds number and long wavelength assumptions. The wave on each side of the channel are assumed to be an infinite train of sinusoidal waves, both having the same constant wave speed and wavelength however, they vary in wave amplitude, channel half width and phase angle. We derived expressions for the axial and transverse velocities, volume flow rate, pressure rise per unit wavelength and streamlines. The effects of varying the wave amplitudes, the phase angle, the channel width, the angle of inclination of the channel as well as the fluid parameters on the flow were analyzed. Trapping conditions were determined and the presence of reflux highlighted using the streamlines for the necessary channel and fluid conditions. By varying the fluid parameters, changes in the fluid that deviated from the Newtonian case resulted in a reduction in the axial velocity in the neighborhood of the center of the channel and a simultaneous increase in the velocity at the periphery of the channel. A nonlinear relation was observed with the pressure rise and the volume flow rate. This nonlinear relation is more pronounced with an increase in the absolute value of the volume flow rate. For Newtonian fluids a linear relation exists between these two variables. The fluid parameters had little effects on the streamlines. However, variations of the wave amplitudes, volume flow, channel width and phase angle had greater effects on the streamlines and hence the trapped region.

• Clinics in Shoulder and Elbow
• /
• v.27 no.1
• /
• pp.26-31
• /
• 2024

Background: The coracoacromial ligament (CAL) is frequently observed to be damaged during arthroscopy and it is unclear how demographic, anatomic, and radiographic factors are related to CAL degeneration in full-thickness rotator cuff tears. Methods: A prospective study was conducted of patients at a single institution undergoing shoulder arthroscopy for first-time, full-thickness rotator cuff tears. We evaluated preoperative anteroposterior radiographs to obtain critical shoulder angle, glenoid inclination, acromial index, acromiohumeral distance, lateral acromial angle, and acromial morphology. We documented CAL quality, rotator cuff tear size and pattern during arthroscopy. Multiple logistic regression was used to identify predictive factors for encountering severe CAL fraying during arthroscopy. Results: Shoulders had mild CAL degeneration in 58.1% of cases, whereas severe CAL degeneration was present in 41.9% of shoulders. Patients with severe CAL attrition were significantly older (62.0 years vs. 58.0 years, P=0.042). Shoulders with severe CAL attrition had large rotator cuff tears in 54.1% of cases (P<0.001), and tears involving the infraspinatus (63.2% vs. 29.6%, P=0.003). The severe degeneration group was more likely to have a larger critical shoulder angle measurement on preoperative radiographs than those in the mild attrition group (36.1°±3.6° [range, 30°-45°] vs. 34.1°±3.8° [range, 26°-45°], P=0.037). Conclusions: While the clinical impact of CAL degeneration remains uncertain, increased severity of CAL degeneration is associated with older age, larger rotator cuff tear size, presence of infraspinatus tearing, and increased preoperative critical shoulder angle. Level of evidence: III.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.2
• /
• pp.357-363
• /
• 2011

Objective: The aim of this study is to set the design direction of the lift chair's tilting seat for development. Background: Great attention has been shown to the development of senior friendly product, because of increasing elderly population rapidly in Korea. Therefore, we need to study on sit-to-stand(STS) motion of elderly systematically for developing lift chair that is one of senior friendly products. Method: In this study, we analyzed joint moment(knee, hip) and muscle activity (Erector spinae, Rectus femoris, Vastus lateralis) on STS motion of elderly(female, 60~70: 7) and young people(female, 20~30: 7) using 3 dimension motion capture camera, force plate, wireless EMG. Results: The results of muscle activity showed a similar trend but the results of joint moment were a lot of differences between the young and the elderly. Conclusion: The results of knee joint moment suggest the angle(10~30deg)-adjustable seat that can be better than to find the optimal seat's angle. Application: The method and results of this study are expected to develop senior friendly product and verification as well as be available to various application.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.6
• /
• pp.699-705
• /
• 1985

Heat transfer characteristics in terms of the tube wall-temperature and the enthalpy have been investigated utilizing ribbed (rifled) tubes in order to enhance heat transfer performance. Considerations were given for the cases of smooth tubes in order to compare with the case of ribbed tubes. The tilt angle of the experimental tubes are from 0.deg. to 90.deg. , in order to simulate the boiler water tubes having 15.deg.-90.deg. inclined angle in boiler nose and studded tubes (burner zones), Natural convection and forced convection (Re=1810) conditions were considered in the experiments. The experimental results for the effect for the tube inclination through a natural convection and forced convection are presented and it is shown that ribbed tubes permit an appreciable increase in heat transfer coefficients and consequently it means substantial reductions in boiler water wall tubes and heat exchanger surface areas.

• Journal of Mechanical Science and Technology
• /
• v.16 no.9
• /
• pp.1121-1136
• /
• 2002

The flow characteristics of film coolant issuing into turbulent boundary layer developing on a convex surface have been investigated by means of flow visualization and three-dimensional velocity measurement. The Schlieren optical system with a spark light source was adopted to visualize the jet trajectory injected at 35° and 90° inclination angles. A five-hole directional pressure probe was used to measure three-dimensional mean velocity components at the injection angle of 35°. Flow visualization shows that at the 90° injection, the jet flow is greatly changed near the jet exit due to strong interaction with the crossflow. On the other hand, the balance between radial pressure gradient and centrifugal force plays an important role to govern the jet flow at the 35° injection. The velocity measurement shows that at a velocity ratio of 0.5, the curvature stabilizes downstream flow, which results in weakening of the bound vortex structure. However, the injectant flow is separated from the convex wall gradually, and the bound vortex maintains its structure far downstream at a velocity ratio of 1.98 with two pairs of counter rotating vortices.

• The korean journal of orthodontics
• /
• v.13 no.1
• /
• pp.45-62
• /
• 1983

To recognize the problems in malocclusion by roentgenocephalograms, the author designed a new pentagonal frame based on maxillary and mandibular bones. The subjects consisted of 44 normal occlusions (20 male and 24 female), 44 Class II division 1 malocclusions (15 male and 29 female) and 67 Class III malocclusions (31 male and 36 female). The results are as follows; 1. In normal group, the maxillary and mandibular skeletons of female we placed more closely to FH plane, so more anteriorly and upward than those of male. 2. In normal group, the posterior vertical height is longer in male than in female and the upper anterior teeth of female are in more labioversion than those of male. 3. By the X, Y coordinate values in pentagonal frame, it is helpful to recognize certain problems in malocclusions. 4. The posterior vertical height is a good indicator in detecting Angle's Class III malocclusion. 5. The maxillary and mandibular body length, the anterior point of maxillary and mandibular body length and the axial inclination of upper and lower anterior teeth can be useful in discerning Angle's Class II & Class III malocclusion.

• Advances in aircraft and spacecraft science
• /
• v.4 no.4
• /
• pp.487-501
• /
• 2017

The main purpose of the paper is to analyze effect of geometrical parameters of the reentry capsules such as radius of the spherical cap, shoulder radius, back shell inclination angle and overall length on the flow field characteristics. The numerical simulation with viscous flow past ARD (Atmospheric Reentry Demonstrator), Soyuz (Russian) and OREX (Orbital Reentry EXperimental) reentry capsules for freestream Mach numbers range of 2.0-5.0 is carried out by solving time-dependent, axisymmetric, compressible laminar Navier-Stokes equations. These reentry capsules appear as bell, head light and saucer in shape. The flow field features around the reentry capsules such as bow shock wave, sonic line, expansion fan and recirculating flow region are well captured by the present numerical simulations. A low pressure is observed immediately downstream of the base region of the capsule which can be attributed to fill-up in the growing space between the shock wave and the reentry module. The back shell angle and the radius of the shoulder over the capsule are having a significant effect on the wall pressure distribution. The effects of geometrical parameters of the reentry capsules will useful input for the calculation of ballistic coefficient of the reentry module.