• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1148-1152
• /
• 2012

In this paper, we propose an intelligent surveillance system using fuzzy contrast and HOG method. This surveillance system is mainly for the intruder detection. In order to enhance the brightness difference, we apply fuzzy contrast and also apply subtraction method to before/after the surveillance. Then the system identifies the intrusion when the difference of histogram between before/after surveillance is sufficiently large. If the incident happens, the camera stops automatically and the analysis of the screen is performed with fuzzy binarization and Blob method. The intruder is detected and tracked in real time by HOG method and linear SVM. The proposed system is implemented and tested in real world environment and showed acceptable performance in both detection rate and tracking success rate.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.7
• /
• pp.685-691
• /
• 2011

The aim of this study is to point out the uniqueness of Doppler optical coherence tomography (DOCT) for use in a probe station for (in vivo) visualization of microscale flow and structure and to maximize the effectiveness of DOCT by overcoming its limitations. Conventional DOCT produces images of only one of the velocity components that is parallel to the incident light. In this study, a multi-angle DOCT to quantify a velocity vector field is proposed; this is an extension from a velocity scalar field to a vector field. Quantifying an instantaneous three-dimensional velocity field in a pulsating flow is another challenge because of its limited frame rate. The in-vivo pulsating blood flow is measured by using an electrocardiogram-gated multi-angle DOCT in a hamster cheek pouch model. It is shown that the aliasing problem caused by a relatively low frame rate is resolved by using this method of measurement.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.4
• /
• pp.1-7
• /
• 2007

Using field observations, this study estimated the total weight and types of marine debris along the coast of Jinu Island in the Nakdong River Estuary after typhoons Usagi and Nari had passed. A numerical wave model was used to calculate the spatial wave height distribution at the time of the typhoons' passage. This study found that the total accumulation rate of marine debris deposited on the coast after the two typhoons had passed was about $5,769.86\;kg/km^2/day$ at this site, which was 14.42 times as high as that in normal weather. The wave height distribution in the sea off Jinu Island, based on numerical modeling, was $4.1{\sim}3.5\;m$, which was 1.0-2.5 times greater than for the case of other islands. Therefore, it is likely that the concentration of wave energy led to the deposition of marine debris.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.1
• /
• pp.385-390
• /
• 2014

Background: Lung cancer is the most frequent malignancy of men worldwide. In Ninawa in Iraq, lung cancer ranks first among cancers diagnosed in men. Since no prior studies have been conducted on incidence trends in our population the present investigation of rates during 2000-2010 was therefore performed. Materials and Methods: Registy data for lung cancer cases were collected from the Directorate of Health in Ninawa-Mosul Continuing Medical Education Center. We restricted our analyses to men categorized according to the age groups of 0- 39, 40-49, 50-59, 60-69 and 70+ years. The significance of incidence rate trends during 2000-2010 was tested using Poisson regression. Age-standardized rates (ASR), and age-specific rates per 100,000 population were calculated. Results: A total of 1,206 incident lung cancer were registered among males, accounting for 15.5% of all male cancers registered during 2000-2010. It ranked first throughout the period. Median age at diagnosis was 69 (mean $66.8{\pm}11.0$) years. The incidence rate of all male lung cancers in Ninawa (all ages) decreased from 26.4 per 100,000 in 2000 to 12.7 in 2010 (APC=-6.55%, p<.0001). The incidences in age groups 40-49, 50-59, 60-69 and 70+ decreased in earlier years and recently appeared (2007-2010) stable. The incidence in age group (0-39) remained stable between 2000-2010. Squamous cell carcinoma (SCC)was the most common type of lung cancer, while adenocarcinoma was relatively rare. Conclusions: With the data from Directorate of Health in Ninawa during the period 2000-2010, lung cancer is the most common cancer but generally declining. Among all age groups, the recent incidence of lung cancer remained stable. The SCC predominance suggests change in tobacco habits as an important factor in the trends observed.

• Environmental Engineering Research
• /
• v.21 no.2
• /
• pp.188-195
• /
• 2016

$17{\alpha}$-Ethynylestradiol (EE2) has gotten growing concerns due to its widely detected in the environment and high estrogenic potency. However, the knowledge on the photochemical behaviors of EE2 in natural waters is still limited. Herein, the photodegradation and estrogenic potency variation of EE2 induced by nitrate were studied using a sunlight simulator consisted by a 300 W medium pressure mercury lamp and 290 nm cut-off filters. It was found that EE2 could be photodegraded at a rate of $0.0193h^{-1}$ in pure aqueous solutions, and the photodegradation of EE2 could be significantly promoted by nitrate. The photodegradation removal rate of EE2 was increased from 9% in Milli-Q water to 85% in 2.0 mM nitrate solutions. Reactive species scavenging experiments demonstrated that the photogenerated $HO{\bullet}$ contributed about 55% to EE2 degradation. Fe(III), Cl- and dissolved humic acid (DHA) could inhibit the photodegradation of EE2 by competing the incident light and photogenerated $HO{\bullet}$, while $HCO_3{^-}$ had no influence on EE2 photodegradation. EE2 was determined to be phototransformed into organic chemicals without estrogenic potency by GC-MS and MCF-7 cell proliferation toxicity tests. These findings could extend our knowledge on the photochemical behaviors of steroid estrogens and provide information for ecological risk assessment.

• Journal of Radiation Protection and Research
• /
• v.43 no.3
• /
• pp.85-96
• /
• 2018

Background: A variety of inorganic scintillators have been developed and improved for use in radiation detection and measurement, and in situ gamma-ray spectrometry in the environment remains an important area in nuclear safety. In order to verify the feasibility of promising scintillators in an actual environment, a performance test is necessary to identify gamma-ray peaks and calculate the radioactivity from their net count rates in peaks. Materials and Methods: Among commercially available scintillators, $LaBr_3(Ce)$ scintillators have so far shown the highest energy resolution when detecting and identifying gamma-rays. However, the intrinsic background of this scintillator type affects efficient application to the environment with a relatively low count rate. An algorithm to subtract the intrinsic background was consequently developed, and the in situ calibration factor at 1 m above ground level was calculated from Monte Carlo simulation in order to determine the radioactivity from the measured net count rate. Results and Discussion: The radioactivity of six natural radionuclides in the environment was evaluated from in situ gamma-ray spectrometry using an $LaBr_3(Ce)$ detector. The results were then compared with those of a portable high purity Ge (HPGe) detector with in situ object counting system (ISOCS) software at the same sites. In addition, the radioactive cesium in the ground of Jeju Island, South Korea, was determined with the same assumption of the source distribution between measurements using two detectors. Conclusion: Good agreement between both detectors was achieved in the in situ gamma-ray spectrometry of natural as well as artificial radionuclides in the ground. This means that an $LaBr_3(Ce)$ detector can produce reliable and stable results of radioactivity in the ground from the measured energy spectrum of incident gamma-rays at 1 m above the ground.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.1
• /
• pp.92-99
• /
• 2012

The optimal physical factors affecting enzyme production in an airlift fermenter have not been studied so far. Therefore, the physical parameters such as aeration rate, pH, and temperature affecting PLA-degrading enzyme production by Actinomadura keratinilytica strain T16-1 in a 3 l airlift fermenter were investigated. The response surface methodology (RSM) was used to optimize PLA-degrading enzyme production by implementing the central composite design. The optimal conditions for higher production of PLA-degrading enzyme were aeration rate of 0.43 vvm, pH of 6.85, and temperature at $46^{\circ}C$. Under these conditions, the model predicted a PLA-degrading activity of 254 U/ml. Verification of the optimization showed that PLA-degrading enzyme production of 257 U/ml was observed after 3 days cultivation under the optimal conditions in a 3 l airlift fermenter. The production under the optimized condition in the airlift fermenter was higher than un-optimized condition by 1.7 folds and 12 folds with un-optimized medium or condition in shake flasks. This is the first report on the optimization of environmental conditions for improvement of PLA-degrading enzyme production in a 3 l airlift fermenter by using a statistical analysis method. Moreover, the crude PLA-degrading enzyme could be adsorbed to the substrate and degraded PLA powder to produce lactic acid as degradation products. Therefore, this incident indicates that PLA-degrading enzyme produced by Actinomadura keratinilytica NBRC 104111 strain T16-1 has a potential to degrade PLA to lactic acid as a monomer and can be used for the recycle of PLA polymer.

• Fire Science and Engineering
• /
• v.21 no.3
• /
• pp.41-46
• /
• 2007

The combustion characteristics of surface forest fire fuels was analysed using variable external irradiation level. The characteristics such as ignition time, ignition temperature, critical heat flux and mass loss rate were measured. Fuel samples were exposed to incident heat fluxes from 8 to $50\;kW/m^2$. For the measurement of various combustion characteristics, the size of specimen holder was $100\;mm{\times}100\;mm{\times}12\;mm$ and the fuel samples grinded by electric mill were the fallen leaves of Quercus variabilis and Pinus densiflora. As results, the occurrence of ignition is possible to the heat flux more than $9\;kW/m^2$. The fuel of Pinus densiflora keeps its high temperature longer than that of Quercus variabilis during the combustion process. The results of measurement shows that the maximun and average mass loss rate of Quercus variabilis larger than that of Pinus densiflora.

• Quality Improvement in Health Care
• /
• v.15 no.2
• /
• pp.107-120
• /
• 2009

Background : To estimate fall incidence rate and associated factors in inpatients from a general hospital. Method : The data were collected from 104 fall incident reports developed by the patient safety committee in a general hospital in Seoul from 01 January 2007 to 31 December 2008. Information included general characteristics of patients, factors related to fall, types, places, circumstances and outcomes of fall. Result : The incidence rate of fall, which was 4.4 per 1,000 total discharged patients and 0.5 per 1,000 patient-days, was much lower than that of several hospitals in the United States. The difference may reflect the different incidence reporting system of each hospital. Fall-prone patients were, in general, $$\geq_-$$65 years of age, had an alert mental status, were ambulatory with some assistance, and were dependent on and ambulatory device. High incidence of falls was associated with patients with circulatory disease. The majority of fall events usually occurred in bed or at the bedside in the patient's room, and occurred more often during the night than during the day or evening. Risk factors of fall were use of drugs (antihypertensive or neuropsychiatric drugs) and environmental factors (e.g., overly high bed height, surrounding objects, inadequate fitness shoes and slippery floor). Physical injury occurred in 43.3% of fall events, which typically required diagnosis of injury and treatment such as suturing. Risk factors for repeated falls were use of a neuropsychiatric drug (odds ratio=13.9) and gait disturbance (odds ratio=91.2). Risk factors for fall-related injury were alert mental status (odds ratio=3.3 times more likely to fall than those who were drowsy or in a stupor) and general weakness(odds ratio=3.3 times more likely to fall than those who were not generally weak). Conclusion : Medical and nursing staff should be aware of the fall risk factors of hospitalized patients and should intensively pursue preventative strategies. Development of fall prevention education based on these results is recommended.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.6
• /
• pp.665-680
• /
• 1997

The specific absorption rate (SAR) distributions in various models of the human head have been analyzed when the models are exposed to 350 MHz and 900 MHz plane waves. The numerical analysis is performed with the finite-difference time-domain (FDTD) method. A homogeneous sphere including a cylinderical neck, a homogeneous head shaped model, and a heterogeneous realistic model are used as models of human head. The incident plane wave used for these calculations is propagating from the front to the back or from the back to the front of the head model, with its E-field vector orientation being parallel to the major length of the body. The specific findings are: 1) the average SARs of the three models are similar mutually but the local SARs of them differ greatly mutually; 2) the power is deposed more deeply in the head at 350 MHz, which is roughly the resonant frequency of a human head, than at 900 MHz; 3) for a plane wave propagating from the back, "hot spot" is found in the neck region, not in the head; 4) for a plane wave propagating from the front, "hot spot" is found in the nose at 900 MHz, and in the upper part of the lip and the jaw region at 350 MHz.