• KSBB Journal
• /
• v.26 no.1
• /
• pp.27-32
• /
• 2011

For the development of functional food and cosmetics using hot water extract of Muraenesox cinereus's skin, contents of vitamin, amino acid and element, and antioxidant activity were investigated. The results are shown as follows: among vitamins, A(0.21mg/100 g), C (78.12mg/100 g), $D_3$ (0.03 mg/100 g), E (1.97 mg/100 g) and Niacin (2.53mg/100 g) were detected, respectively.Mineral contents were an order of K > P > Na > Mg > Ca > Fe and Zn. Contents of total amino acids were an order of Pro > Gly > Arg > Glu > Phe > Ala. Especially, the sum of total amino acids was 27.17 mg/100 mL, which was about 4.0 fold higher than that of free amino acid. DPPH radical scavenging activity of hot water extract of M. cinereus's skin at 25 mg/mL was 63.5% and did not increase at above 50 mg/mL. Activities of antioxidant enzymes in the liver of ethanol-treated rats using hot water extract of M. cinereus's skin were investigated. Compared to control group, activities of ADH and GSH-px were decreased. In the case of CAT and SOD activity, they were increased. These results showed that the hot water extract of M. cinereus's skin can be applied to raw macterial for functional food and cosmetics.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.4
• /
• pp.288-295
• /
• 1999

This experiment was conducted to evaluate the appropriate nutrient solution for hydroponics in Angelica keiskei. The nutrient solutions used were Korean solution, Yamazaki solution, Netherlands solution and open field cultivation. The highest yield of Angelica keiskei was 4, 542kg/10a at Netherlands solution. 'The yield at Netherlands solution was increased about 139 percent, compared to that at open field cultivation. The highest germanium contents was 0. 35ppm at Korean solution. The contents increased 40 percent at Korean solution compare to that at open field cultivation.

• Korean Journal of Food Science and Technology
• /
• v.35 no.1
• /
• pp.1-6
• /
• 2003

Chemical compositions of several herbs (rosemary, mint, thyme, sage, and lavender) cultivated in Korea were analyzed. Approximate compositions were as follows: moisture $69.92{\sim}82.10%$, crude ash $2.48{\sim}6.15%$, crude fat $0.40{\sim}2.46%$, crude protein $0.84{\sim}1.57%$, and crude fiber $2.48{\sim}6.15%$. Total contents of phenolics determined by Folin-Dennis's method were in the range of $73.24{\sim}197.79mg%$. Contents of minerals, Na, Ca, Mn, P, Mg, Zn, and Fe determined by ICP-AES were $43.0{\sim}112.5,\;177.5{\sim}304.0,\;0.5{\sim}1.5,\;74.0{\sim}218.5,\;57.0{\sim}116.0,\;1.0{\sim}2.0$ and $3.0{\sim}5.0mg%$, respectively. Free sugar contents determined by HPLC were: sucrose $0{\sim}7.61$, glucose $0.94{\sim}15.92$, and rhamnose $0.64{\sim}7.99mg%$. Fatty acids including palmitic, stearic, oleic, linoleic, linolenic, and arachidonic acids were identified by GC. Linoleic and linolenic acid contents were higher than those of palmitic and stearic acids. Aroma components identified by GC-MS were 1,8-cineole, ${\alpha}-phellandrene,\;{\alpha}-terpinene,\;{\beta}-pinene,\;{\beta}-thujone$, borneol, butan-1-ol, cis-sabinene hydrate, ${\delta}-carene,\;{\gamma}-terpinene$, and verbenone.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.8
• /
• pp.489-493
• /
• 2016

In this study, the effect of vanadium oxide ($V_2O_5$) content and pre-sintering atmosphere on sealing property of glass frit that consisted of $V_2O_5-BaO-ZnO-P_2O_5-TeO_2-CuO-Fe_2O_3-SeO_2$ was investigated by XPS (X-ray photoelectron spectroscopy). The content of V2O5 was changed to 15, 30, and 45 mol%, and the pre-sintering was carried out in air and $N_2$ condition, respectively. XPS analysis conducted before and after laser irradiation with identical sample. Before laser treatment, glass frits that were pre-sintered at air condition showed both $V^{4+}$ and $V^{5+}$, but the valence state was changed to $V^{5+}$ after laser irradiation when the glass frits contained 30 and 45 mol% $V_2O_5$; this change led to non-adhesive property. On the other hand, glass frits that were pre-sintered at $N_2$ condition exhibited only $V^{4+}$ and it showed fine adhesion irrespective of the $V_2O_5$ content. As a result, the existence of $V^{4+}$ seems to be a major factor for controlling the adhesive property of glass frit for laser sealing.

• The Korean Journal of Quaternary Research
• /
• v.5 no.1
• /
• pp.15-31
• /
• 1991

A total of 90 surface sediment samples, collected from the continental margin area bordering east and southeast coast of Korea, were subject to the geochemical analyses with the aim of filling the gap in our knowledge of this environment. The analyzed items included the major elements (Al, Fe, Mg, Ca, K, Na, p and Mn), organic carbon, and some trace metals (Ba, Co, Cu, Sr and Zn). The sediment grain-size exerted a predominant influence on the contents of most elements, with the exceptions of Ca, K, Sr and Ba. The Ca and Sr contents, being closely interrelated each other, were mainly controlled by the calcium carbonate content. The K content, on the other hand, appeared to be influenced by both illite and feldspar. The Ba content showed a certain relationship with that of K, suggesting a common source of these two elements; potassium feldspar. The R-mode factor analysis result also reaffirmed the above-mentioned controlling factors on the sediment geochemistry. The grain-size dependency of trace metals obscures their areal distribution pattern from the total contents. However, with the metal/aluminum ratios we could differentiate the subtle difference in the metal enrichment. Hence, sediments of the southern coastal area appear to receive some anthropogenic inputs of metals, though the effect is still negligible.

• Journal of Life Science
• /
• v.14 no.3
• /
• pp.525-530
• /
• 2004

This study has been performed to examine physico-chemical properties and composition of venison in Deer breeds. According the results, moisture content in the venison ranged between 74% and 75%, and there were no significant differences among the breeds, or among the cutting parts. Fat content in the meats was estimated as less than 1% except in loin, protein contents was estimated as more than 22%, and ash content was estimated as more than 1.5%. For the contents of inorganic material in the loin, Fe$^{3+}$ content was higher in Elk than in other breeds, the contents of $Cu^{2+}$, $Mn^{2+}$, $K^{+}$, $Mg^{2+}$ and $Ca^{2+}$were higher in Red deer than in others, and the contents of $Fe^{3+}$, $K^{+}$, and $P^{+}$ were higher in Sika deer than in others. For the contents of inorganic material in the leg, the contents of $Cu^{2+}$, $Zn^{2+}$, $K^{+}$, $Ca^{2+}$ and $Mg^{2+}$ were higher in Elk than in other breeds, the contents of $Fe^{3+}$ and$P^{+}$ were higher in Red deer than in others, and the contents of $Cu^{2+}$ and $Fe^{3+}$were higher in Sika deer than in others. Amino acid contents in the venison alanine, proline, glycine, lycine and histidine were highly contained. and the contents of asparagine, cysteine, isoleucine and threonine were low. For the differences of amino acid contents among the breeds, the level was the higher in Sika deer than those of others. For the fatty acid in loin, the contents of myristic acid, oleic acid and linolenic acid in Sika deer were higher than those of others, the contents of myristic acid, palmitoleic acid, oleic acid and arachidonic acid in Red deer were higher than those of others and in Elk, the contents of palmitic acid and stearic acid were higher than those of others. For the contents of unsaturated fatty acid and polyunsaturated fatty acids, the level was higher in Red deer than those of others. For the fatty acid in leg, the contents of oleic acid, linolenic acid, linolenic acid and arachidonine acid in Sika deer were higher than those of others, the contents of myristic acid, palmitic acid, palmitoleic acid and oleic acid in Red deer were higher than those of others and in Elk, the contents of stearic acid and linolenic acid were higher than those of others. For the contents of saturated fatty acid, the level was lowest in Sika deer. For the contents of unsaturated fatty acid and polyunsaturated fatty acids were respectively highest in Sika deer. Comparing the contents inorganic materials between loin and leg, the concentrations in leg were generally higher than that of loin.n.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.1-33
• /
• 1997

The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.

• Economic and Environmental Geology
• /
• v.15 no.3
• /
• pp.123-154
• /
• 1982

Petrochemical, K-Ar dating, Sand Rb/Sr isotopes, metallogenic zoning, paleomagnetic and geotectonic studies of the Gyongsang basin were carried out to examine applicability of plate tectonics to the post-late Cretaceous igneous activity and metallogeny in the southeastern part of Korean Peninsula. The results obtained are as follows: 1. Bulgugsa granitic rocks range from granite to adamellite, whose Q-Ab-Or triangular diagram indicates that the depth and pressure at which the magma consolidated increase from coast to inland varying from 6 km, 0.5-3.3 kb in the coastal area to 17 km, 0.5-10 kb in the inland area. 2. The volcanic rocks in Gyongsang basin range from andesitic to basaltic rocks, and the basaltic rocks are generally tholeiitic in the coastal area and alkali basalt in the inland area. 3. The volcanic rocks of the area have the initial ratio of Sr^{87}/Sr^{86} varying from 0.706 to 0.707 which suggests a continental origin; the ratio of Rb/Sr changing from 0.079-0.157 in the coastal area to 0.021-0.034 in the inland area suggests that the volcanism is getting younger toward coastal side, which may indicate a retreat in stage of differentiation if they were derived from a same magma. The K_2O/SiO_2 (60%) increases from about 1.0 in the coastal area to about 3.0 in the inland area, which may suggest an increase indepth of the Benioff zone, if existed, toward inland side. 4. The K-Ar ages of volcanic rocks were measured to be 79.4 m.y. near Daegu, and 61.7 m.y. near Busan indicating a southeastward decrease in age. The ages of plutonic rocks also decrease toward the same direction with 73 m.y. near Daegu, and 58 m.y. near Busan, so that the volcanism predated the plutonism by 6 m.y. in the continental interior and 4 m.y. along the coast. Such igneous activities provide a positive evidence for an applicability of plate tectonics to this area. 5. Sulfur isotope analyses of sulfide minerals from 8 mines revealed that these deposits were genetically connected with the spacially associated ingeous rocks showing relatively narrow range of ${\delta}^{34}S$ values (-0.9‰ to +7.5‰ except for +13.3 from Mulgum Mine). A sequence of metallogenic zones from the coast to the inland is delineated to be in the order of Fe-Cu zone, Cu-Pb-Zn zone, and W-Mo zone. A few porphyry type copper deposits are found in the Fe-Cu zone. These two facts enable the sequence to be comparable with that of Andean type in South America. 6. The VGP's of Cretaceous and post Cretaceous rocks from Korea are located near the ones($71^{\circ}N$, $180^{\circ}E$ and $90^{\circ}N$, $110^{\circ}E$) obtained from continents of northern hemisphere. This suggests that the Korean peninsula has been stable tectonically since Cretaceous, belonging to the Eurasian continent. 7. Different polar wandering path between Korean peninsula and Japanese islands delineates that there has been some relative movement between them. 8. The variational feature of declination of NRM toward northwestern inland side from southeastern extremity of Korean peninsula suggests that the age of rocks becomes older toward inland side. 9. The geological structure(mainly faults) and trends of lineaments interpreted from the Landsat imagery reveal that NNE-, NWW- and NEE-trends are predominant in the decreasing order of intensity. 10. The NNE-trending structures were originated by tensional and/or compressional forces, the directions of which were parallel and perpendicular respectively to the subduction boundary of the Kula plate during about 90 m.y. B.P. The NWW-trending structures were originated as shear fractures by the same compressional forces. The NEE-trending structures are considered to be priginated as tension fractures parallel to the subduction boundary of the Kula plate during about 70 m.y. B.P. when Japanese islands had drifted toward southeast leaving the Sea of Japan behind. It was clearly demonstrated by many authors that the drifting of Japanese islands was accompanied with a rotational movement of a clock-wise direction, so that it is inferred that subduction boundary had changed from NNE- to NEE-direction. A number of facts and features mentioned above provide a suite of positive evidences enabling application of plate tectonics to the late Cretaceous-early Tertiary igneous activity and metallogeny in the area. Synthesizing these facts, an arc-trench system of continental margin-type is adopted by reconstructing paleogeographic models for the evolution of Korean peninsula and Japan islands. The models involve an extention mechanism behind the are(proto-Japan), by which proto-Japan as of northeastern continuation of Gyongsang zone has been drifted rotationally toward southeast. The zone of igneous activity has also been migrated from the inland in late-Cretaceous to the peninsula margin and southwestern Japan in Tertiary.

• Korean Journal of Food Science and Technology
• /
• v.39 no.3
• /
• pp.255-259
• /
• 2007

For this investigation, we analyzed the chemical characteristics and enzyme activities of Icheon Ge-Geol radish, Gangwha turnip, and Korean radish. Regarding their proximate compositions, the water contents of the Icheon Ge-Geol radish, Gangwha turnip, and Korean radish were 87.78, 92.73, and 91.45%, respectively. The crude protein, crude fiber, and ash contents of the Icheon Ge-Geol radish were 1.35, 1.11, and 1.55%, respectively, which were much higher than the contents of the other samples; however, total dietary fiber was significantly lower. For mineral content, the magnesium, potassium, and calcium levels of the Icheon Ge-Geol radish were higher than the other samples. With regards to the enzyme activities of the samples, the protease and myrosinase activities of the Icheon Ge-Geol radish were higher than in the other samples. For ${\alpha}-amylase$ activity, the Korean radish showed the strongest activity (18.99 units/g of sample), followed by the Gangwha turnip and Icheon Ge-Geol radish.

• Applied Biological Chemistry
• /
• v.49 no.1
• /
• pp.77-81
• /
• 2006

This study was carried out to investigate the chemical components, and antioxidative and $anti-{\alpha}-glucosidase$ activities of Equisetum arvense extracts. In Equisetum arvense extracts were composed of 53.20% of crude fiber, 20.42% of crude ash, 15.32% of crude protein and 2.21% of crude fat. Potassium was the most predominant mineral and followed by phosphorus, calcium, magnesium, and sodium. The contents of the unsaturated fatty acids, such as linolenic acid, linoleic acid, and palmitic acid, were higher than those of saturated fatty acids. Seventy percent ethanol extract exhibited antioxidative activity with $IC_{50}$ of $168.1\;{\mu}g/ml$. The Seventy percent methanol extract showed higher ${\alpha}-glucosidase$ inhibitory activity than other solvent extracts.