• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.93-93
• /
• 2010

Semiconductor nanocrystal quantum dots (NQDs) have recently attracted considerable interest for use in photovoltaics. Band gaps of NQDs can be tuned over a considerable range by varying the particle size thereby allowing enhance absorption of solar spectrum. NQDs, synthesized using colloidal routes, are solution processable and promise for a large-area fabrication. Recent advancements in multiple-exciton generation in NQD solutions have afforded possible efficiency improvements. Various architectures have attempted to utilize the NQDs in photovoltaics, such as NQD-sensitized solar cell, NQD-bulk-heterojuction solar cell and etc. Here we have fabricated CdSe NQDs with the band gap of 1.8 eV to 2.1 eV on thin-layers of p-type organic crystallites (1.61 eV) to realize a donor-acceptor type heterojuction solar cell. Simple structure as it was, we could control the interface of electrode-p-layer, and n-p-layer and monitor the following efficiency changes. Specifically, surface molecules adsorbed on the NQDs were critical to enhance the carrier transfer among the n-layer where we could verify by measuring the photo-response from the NQD layers only. Further modifying the annealing temperature after the deposition of NQDs on p-layers allowed higher conversion efficiencies in the device.

• 한국진공학회지
• /
• 제18권5호
• /
• pp.352-357
• /
• 2009

본 연구에서는 1.1 eV의 에너지대역을 흡수할 수 있는 InAs 양자점구조와 1.3 eV의 에너지 대역을 흡수 할 수 있는 InGaAs 양자우물구조를 이용한 텐덤형 태양전지의 구조를 1D poisson을 이용해 설계하고, 분자선 에피택시 장비를 이용하여 각각 5, 10, 15층씩 쌓은 양자점 및 양자우물구조를 삽입하여 p-n접합을 성장하였다. Photoluminescence (PL) 측정을 이용한 광학적특성 평가에서 양자점 5층 및 양자우물 10층을 삽입한 구조의 PL 피크가 가장 높은 상대발광강도를 나타냈으며, 각각 1.1 eV 및 1.3 eV에서 57.6 meV 및 12.37 meV의 Full Width at Half Maximum을 나타내었다. 양자점의 밀도 및 크기는 Reflection High-Energy Electron Diffraction system과 Atomic Force Microscope를 이용해 분석하였다. 그리고 GaAs/AlGaAs층을 이용한 터널접합에서는 I-V 측정을 통하여 GaAs층의 두께(20, 30, 50 nm)에 따른 터널링 효과를 평가하였다. GaAs 층의 두께가 30 nm 및 50 nm의 터널접합에서는 backward diode 특성을 나타낸 반면, 20 nm GaAs층의 GaAs/AlGaAs 터널접합에서는 다이오드 특성 곡선을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.146-146
• /
• 2015

We report the enhanced performance of poly(N-vinylcarbozole) (PVK)/poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)-based quantum-dot light-emitting diodes by inserting the polyaniline:poly (p-styrenesulfonic acid) (PANI:PSS) interlayer. The QD-LED with PANI:PSS interlayer exhibited a higher luminance and luminous current efficiency than that without PANI:PSS. Ultraviolet photoelectron spectroscopy results exhibited different electronic energy alignments of QD-LEDs with/without the PANI:PSS interlayer. By inserting the PANI:PSS interlayer, the hole-injection barrier at the QD layer/PVK interface was reduced from 1.45 to 1.23 eV via the energy level down-shift of the PVK layer. The reduced barrier height alleviated the interface carrier charging responsible for the deterioration of the current and luminance efficiency. This suggests that the insertion of PANI:PSS interlayer in QD-LEDs contributed to (i) increase the p-type conductivity and (ii) reduce the hole barrier height of QDs/PVK, which are critical factors leading to improve the efficiency of QD-LEDs.

• 한국수소및신에너지학회논문집
• /
• 제33권1호
• /
• pp.113-120
• /
• 2022

Quantum dots (QDs) are attractive photosensitizer candidates for application not only in solar cells but also in solar hydrogen generation. For the prepartion of highly efficient QD-sensitized photoelectrodes, it is important to reduce electron recombination at the photoanode/electrolyte interface. Here, we study on the coating condition of ZnS passivation layers on the photoanodes in QD-sensitized solar cells (QDSCs). The ZnS passivation layers are coated by successive ionic layer adsorption and reaction method, and as the cation precursor, zinc acetate and zinc nitrate are empolyed. Due to the higher pH of cation precursor solution, the ZnS loading is improved when the zinc acetate is used, compared to the zinc nitrate. This improved loading of ZnS leads to the reduced electron recombination at the surface of photoanodes and the enhaced conversion efficiency of QDSCs from 6.07% to 7.45%.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.207-207
• /
• 2012

Si quantum dot (QD) imbedded in a $SiO_2$ matrix is a promising material for the next generation optoelectronic devices, such as solar cells and light emission diodes (LEDs). However, low conductivity of the Si quantum dot layer is a great hindrance for the performance of the Si QD-based optoelectronic devices. The effective doping of the Si QDs by semiconducting elements is one of the most important factors for the improvement of conductivity. High dielectric constant of the matrix material $SiO_2$ is an additional source of the low conductivity. Active doping of B was observed in nanometer silicon layers confined in $SiO_2$ layers by secondary ion mass spectrometry (SIMS) depth profiling analysis and confirmed by Hall effect measurements. The uniformly distributed boron atoms in the B-doped silicon layers of $[SiO_2(8nm)/B-doped\;Si(10nm)]_5$ films turned out to be segregated into the $Si/SiO_2$ interfaces and the Si bulk, forming a distinct bimodal distribution by annealing at high temperature. B atoms in the Si layers were found to preferentially substitute inactive three-fold Si atoms in the grain boundaries and then substitute the four-fold Si atoms to achieve electrically active doping. As a result, active doping of B is initiated at high doping concentrations above $1.1{\times}10^{20}atoms/cm^3$ and high active doping of $3{\times}10^{20}atoms/cm^3$ could be achieved. The active doping in ultra-thin Si layers were implemented to silicon quantum dots (QDs) to realize a Si QD solar cell. A high energy conversion efficiency of 13.4% was realized from a p-type Si QD solar cell with B concentration of $4{\times}1^{20}atoms/cm^3$. We will present the diffusion behaviors of the various dopants in silicon nanostructures and the performance of the Si quantum dot solar cell with the optimized structures.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.146-147
• /
• 2012

InP 기판위에 자발성장법으로 성장된 InAs 양자점은 $1.55{\mu}m$ 영역에서 발진하는 양자점 반도체 레이저 다이오드 및 광 증폭기를 제작할 수 있기 때문에 많은 관심을 받고 있다. 광통신 대역의 $1.55{\mu}m$ 반도체 레이저 다이오드 및 광 증폭기 분야에서 InAs/InP 양자점이 많은 관심을 받고 있으나, InAs/GaAs 양자점에 비해 제작이 어려운 단점을 가지고 있다. InAs/InP 양자점은 InAs/GaAs 양자점에 비해 격자 불일치가 작아 양자점의 크기가 크고 특히 As 계 박막과 P 계박막의 계면에서 V 족 원소 교환 반응으로 계면 특성 저하가 발생하여 성장이 까다롭다. As 과 P 간의 교환반응은 성장온도와 V/III 에 의해 크게 영향을 받는 것으로 보고되었다. 그러나, P계 InGaAsP 박막 위에 InAs 성장 시 발생하는 As/P 교환반응에 대한 연구는 매우 적다. 본 연구에서는 InGaAsP 박막 위에 InAs 양자점 성장 시 GI (growth interruption)에 의한 As/P 교환반응이 InAs 양자점의 형상 및 광학적 특성에 미치는 영향을 연구하였다. 시료는 수직형 저압 Metal Organic Chemical Vapor Deposition (MOCVD)를 이용하여 $520^{\circ}C$의 온도에서 성장하였다. 그림1(a) 구조의 양자점은 InP (100) 기판위에 InP buffer layer를 성장한 후 InP와 격자상수가 일치하는 $1.1{\mu}m$ 파장의 InGaAsP barrier를 50 nm 성장하였다. 그 후 As 분위기 하에서 다양한 GI 시간을 주었고 그 위에 InAs 양자점을 성장하였다. 양자점 성장 후 InGaAsP barrier를 50 nm, InP capping layer를 50 nm 성장하였다. AFM측정을 위해 InP capping layer 위에 동일한 GI 조건의 InAs/InGaAsP 양자점을 성장하였고 양자점 성장 후 As분위기 하에 온도를 내려주었다. 그림1(b) 구조의 양자점은 그림1(a) 와 모든 조건은 동일하나 InAs 양자점과 InGaAsP barrier 사이에 GaAs 2ML를 삽입한 구조이다. 양자점 형상 특성 평가는 Atomic force microscopy를 이용하였으며, 광특성 분석은 Photoluminescence를 이용하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.297-297
• /
• 2010

Precise control of the position and density of doping elements at the nanoscale is becoming a central issue for realizing state-of-the-art silicon-based optoelectronic devices. As dimensions are scaled down to take benefits from the quantum confinement effect, however, the presence of interfaces and the nature of materials adjacent to silicon turn out to be important and govern the physical properties. Utilization of visible light is a promising method to overcome the efficiency limit of the crystalline Si solar cells. Si quantum dots (QDs) have been proposed as an emission source of visible light, which is based on the quantum confinement effect. Light emission in the visible wavelength has been reported by controlling the size and density of Si QDs embedded within various types of insulating matrix. For the realization of all-Si QD solar cells with homojunctions, it is prerequisite not only to optimize the impurity doping for both p- and n-type Si QDs, but also to construct p-n homojunctions between them. In this study, XPS and SIMS were used for the development of p-type and n-type Si quantum dot solar cells. The stoichiometry of SiOx layers were controlled by in-situ XPS analysis and the concentration of B and P by SIMS for the activated doping in Si nano structures. Especially, it has been experimentally evidenced that boron atoms in silicon nanostructures confined in SiO2 matrix can segregate into the Si/$SiO_2$ interfaces and the Si bulk forming a distinct bimodal spatial distribution. By performing quantitative analysis and theoretical modelling, it has been found that boron incorporated into the four-fold Si crystal lattice can have electrical activity. Based on these findings, p-type Si quantum dot solar cell with the energy-conversion efficiency of 10.2% was realized from a [B-doped $SiO_{1.2}$(2 nm)/$SiO_2(2\;nm)]^{25}$ superlattice film with a B doping level of $4.0{\times}10^{20}\;atoms/cm^2$.

• Applied Microscopy
• /
• 제46권1호
• /
• pp.37-44
• /
• 2016

In this study $TiO_2$/reduced graphene oxide ($TiO_2/rGO$) bipyramid with tunable nanostructure was fabricated by two-step solvothermal process and subsequent heat-treatment in air. The as-synthesized anatase $TiO_2$ nanocrystals possessed morphological bipyramid with exposed dominantly by (101) facets. Polyethylenimine was utilized during the combination of $TiO_2$ and graphene oxide (GO) to tune the surface charge, hindering the restack of graphene during solvothermal process and resulting in 1 to 5 layers of rGO wrapped on $TiO_2$ surface. After a further calcination, a portion of carbon quantum dots (CQDs) with a diameter about 2 nm were produced owing to the oxidizing and cutting of rGO on $TiO_2$. The as-prepared $TiO_2/rGO$ hybrid showed a highly photocatalytic activity, which is about 3.2 and 7.7 times enhancement for photodegradation of methyl orange with compared to pure $TiO_2$ and P25, respectively. We assume that the improvement of photocatalysis is attributed to the chemical bonding between rGO/CQDs and $TiO_2$ that accelerates photogenerated electron-hole pair separation, as well as enhances light harvest.

• 대한화학회지
• /
• 제60권6호
• /
• pp.402-409
• /
• 2016

3-Mecaptopropionic acid (MPA) 리간드와 하이브리드 타입 리간드($MPA+CdCl_2$)로 각각 부동화(passivation) 된 2.8 nm 크기의 황화납 콜로이드 양자점 박막을 제작하고, 각각을 대기 중, 질소 분위기에서 열처리, 오존 처리 하였을 때 나타나는 두 양자점 박막의 전자 구조와 조성 원소의 변화를 광전자 분광법을 이용하여 연구하였다. 대기에서 열처리는 리간드 종류와 관계없이 황화납 양자점의 가전자대 시작점이 공통적으로 약한 p-도핑 효과가 있음을 직접적으로 확인할 수 있었다. 또한, 오존처리 후 두 황화납 양자점 표면에 공통적으로 $Pb(OH)_2$, $PbSO_x$, PbO를 형성하는 것을 확인하였다. 하지만, 오존에 의해 형성된 산화물 중 PbO 성분은 특별히 하이브리드 타입 리간드로 부동화 된 양자점에서 형성된 양이 MPA 리간드만으로 부동화 된 양자점과 비교했을 때 감소한 것을 확인할 수 있었다. 이것은 PbS(111) 격자면에 있는 과량의 Pb 표면이 $Cl_2$으로 부동화되면서, Pb 양이온과 오존의 반응을 차단함으로써 PbO의 형성을 어렵게 했기 때문으로 추정된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.97-97
• /
• 2010

We demonstrate the hybrid polymer-quantum dot based multi-functional device (Organic bistable devices, Light-emitting diode, and Photovoltaic cell) with a single active-layer structure consisting of CdSe/ZnS semiconductor quantum-dots (QDs) dispersed in a poly N-vinylcarbazole (PVK) and 1,3,5-tirs- (N-phenylbenzimidazol-2-yl) benzene (TPBi) fabricated on indium-tin-oxide (ITO)/glass substrate by using a simple spin coating technique. The multi-functionality of the device as Organic bistable device (OBD), Light Emitting Diode (LED), and Photovoltaic cell can be successfully achieved by adding an electron transport layer (ETL) TPBi to OBD for attaining the functions of LED and Photovoltaic cell in which the lowest unoccupied molecular orbital (LUMO) level of TPBi is positioned at the energy level between the conduction band of CdSe/ZnS and LiF/Al electrode (band-gap engineering). Through transmission electron microscopy (TEM) study, the active layer of the device has a p-i-n structure of a consolidated core-shell structure in which semiconductor QDs are uniformly and isotropically adsorbed on the surface of a p-type polymer core and the n-type small molecular organic materials surround the semiconductor QDs.