• Reproductive and Developmental Biology
• /
• 제32권4호
• /
• pp.217-222
• /
• 2008

The techniques of IVM, IVF and IVC of canine oocytes may provide useful information for gamete salvage programs and the conservation of endangered canidae. This investigation has been made to determine the efficiency of in vitro maturation (IVM) as a basic experiment to study the development of canine oocytes after in vitro fertilization (IVF). The rate of oocytes developing to the Mil stage was higher in the hormone treated group (10 IU/ml hCG+eCG, 14.7%, p<0.05) than in the control group (0 IU/ml hCG+eCG, 10.0%). The monospermy and pronuclear rates of canine oocytes were investigated after caffeine treatment on IVF. Canine oocytes were fertilized in the Fert-TALP medium supplemented with 0, 10, 20 or 30 mM caffeine (Fert I, Fert II, Fert III or Fert IV, respectively). The highest pronuclear formation rate was obtained in the Fert I for 24 h IVF (6.7%, 6/89). Therefore, it is believed that unlike in other mammals, caffeine in canine IVF does not increase the efficiency of fertilization rate, and is not an important factor.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권8호
• /
• pp.1120-1126
• /
• 2006

Dry matter (DM) degradation of leaves from Quercus cercis, Quercus libari, Quercus branti, and Quercus coccifera was determined using two different techniques: (i) in vitro gas production and (ii) the nylon bag degradability technique. In vitro gas production in the presence or absence of PEG and in situ DM disappearance were measured at 3, 6, 12, 24, 48, 72 and 96 h. In situ and in vitro DM degradation kinetics were described using the equation y = a+b ($1-e^{-ct}$). At all incubation times leaves from Quercus branti incubated with or without PEG gave significantly higher gas production than the other oak leaves except for 3 and 6 h incubation when leaves from Quercus branti without PEG supplementation only gave higher gas production than Quercus cercis and Quercus coccifera. At all incubation times except at 3, 6 and 12 h the DM disappearance from Quercus branti was significantly higher than the other species. Generally, PEG supplementation considerably increased the gas production at all incubation times and estimated parameters such as gas production rate ($c_{gas}$), gas production (ml) from the quickly soluble fraction ($a_{gas}$), gas production (b) from the insoluble fraction, potential gas production (a+b). However, all oak leaves did not give the same response to the PEG supplementation. Although the increase in gas production at 96 h incubation time was 8.9 ml for Quercus libari the increase was 5.5 ml for Quercus coccifera. It was concluded that except at early incubation times the relationships between the two methodologies seem to be sufficiently strong to predict degradability parameters from gas production parameters obtained in the presence or absence of PEG.

• 한국전자파학회논문지
• /
• 제14권12호
• /
• pp.1311-1320
• /
• 2003

본 논문에서는 RF 전자기장을 사용한 동물 및 세포 실험에서 전자기장 노출량의 정확성을 평가할 수 있는 방법을 제안하였다. 이를 위해 전자파 흡수율(SAR)을 전자기장 노출량의 단위로 사용한 동물 및 세포 연구 논문과 휴대폰 및 PDA에 대한 전자파 흡수율 시험 성적서를 대상으로 출력 전력, 전력 밀도 등과 SAR의 상관 관계 및 회귀 관계를 분석하였다. 동물 실험의 경우 전력 밀도와 SAR이, 세포 실험의 경우 출력 전력이 duty factor를 고려한 SAR과 통계적으로 유의한 상관 관계를 보였다. 회귀분석에서의 노출 불확실성을 평가하기 위해 결정계수값을 분석하였다. 각각의 실험장치 및 방법에 대한 해석 또는 측정 기법의 분석 이전에 본 연구 방법을 실시하여 대상 연구군의 특성을 고찰한다면 보다 효율적인 전자기장노출신뢰성 평가를 실시할 수 있을 것으로 판단된다.

• Journal of Plant Biotechnology
• /
• 제42권2호
• /
• pp.111-116
• /
• 2015

Interest and great demand for blueberry (Vaccinium corymbosum) have increased, as V. corymbosum is now one of the most economically important crops in Korea. It is expected that blueberry production and the area planted for cultivation will increase consistently in the years ahead because of high profitability and the consumer's demand for healthy ingredients. Effective mass production of blueberry is urgently needed for commercial cultivation establishment, but a main limitation is lack of a propagation system that produces a disease-free plant material for commercial plantation. A large amount of research has focused entirely on developing tissue culture techniques for blueberry propagation. However, controlling fungal and bacterial contamination of woody plant material is extremely difficult. Our study was conducted to investigate the effect of biocide addition during the in vitro culture of blueberry on plantlet growth and contamination occurrence. Four biocides, including Plant Preservative Mixture ($PPM^{TM}$), vancomycin, nystatin and penicillin G, were used in varying concentrations during the in vitro propagation of blueberry. When nystatin was added into the medium at low concentrations, the overall growth of blueberry plantlets was retarded. Addition of vancomycin and penicillin G in high concentrations decreased contamination but induced plantlet mortality. On the other hand, when 1ml/L $PPM^{TM}$ was added, the growth characteristics of blueberry plantlets did not significantly differ from non-treatment (control), and the contamination occurrence rate was very low. From these results, we found that the addition of the appropriate biocide could provide an effective method to reduce contamination in the culture process, thereby raising in vitro production efficiency.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 추계학술대회
• /
• pp.16-16
• /
• 2019

The Cassava (Manihot esculenta Crantz) is a perennial woody shrub cultivated mainly in the tropics for its starchy tuberous roots. It belongs to the family Euphorbiaceae which also includes rubber (Hevea brasiliensis) and castor bean (Ricinus communis). Among tropical crops, rice, sugarcane, maize and cassava are the most important sources of calories for human consumption. Problems in the propagation of cassava are virus diseases and low rates of seed germination. Thus, a study was undertaken to develop an efficient in vitro mass propagation protocol of Manihot esculenta Crantz. Young and actively growing stem segments were excised from adult plants of cassava. Samples were cut into a 3~4 cm nodal segments with single node after sterilization, and cultivated in the different medium supplemented with various plant growth regulators for 4 weeks. For shoot multiplication, single-node stem segments, approximately 1 cm in length, were taken from in vitro derived shoots and subcultured. After 4~6 weeks, the shoot generation rate was 55.6%, the shoot number and its length were 1.0/explant and 2.3 cm in the most favorable medium composition. Our experiments confirmed that in vitro growth and multiplication of plantlets could depend on its reaction to the different medium composition, and this micropropagation techniques could be a useful system for healthy and vigorous plant production.

• Nutritional Sciences
• /
• 제3권2호
• /
• pp.71-76
• /
• 2000

Effects of extrusion processing on zinc bioavailability in a product made from 85% semolina and 15% soy protein concentrate were determined using in vitro and in vivo techniques. Soluble and dialyzable zinc contents of the extruded product were 15.3 and 13.0 $\mu$g/g, respectively, compared to 15.6 to 15.0$\mu$g/g in the raw (unprocessed) ingredients. Zinc bioavailability in diets in which all of the zinc (14ppm) was provided either by the extruded product or by its raw ingredients was determined in two groups of male Sprague Dawley rats. No differences were found in concentrations of zinc in plasma, liver and femur between rats fed the two experimental diets. Apparent zinc digestibility was similar for both diets. These results are consistent with the in vitro results showing no effect of extrusion processing on zinc bioavailability.

• Restorative Dentistry and Endodontics
• /
• 제46권2호
• /
• pp.19.1-19.12
• /
• 2021

Objectives: The purpose of this study was to conduct a systematic review and meta-analysis of in vitro studies regarding the effectiveness of reciprocating and rotary instrumentation on microbial reduction in root canals. Materials and Methods: PubMed, Scopus, Web of Science, the Cochrane Library, and the gray literature were searched through December 2019. Studies comparing the influence of reciprocating and rotary instrumentation on the removal of microorganisms from root canals that quantified the antimicrobial effect were included. Data extraction was completed using a systematic form for data collection. The risk of bias of the studies was evaluated. Standardized mean differences (SMDs) and confidence intervals (CIs) were calculated using a random effects meta-analysis. Results: Seventeen in vitro studies were included in this systematic review, of which 7 provided adequate data for inclusion in the meta-analysis. Both reciprocating and rotary systems were similarly effective in reducing the microbial load in infected root canals (SMD [95% CI], 0.0481 [-0.271, 0.367]). Three studies showed a low risk of bias, whereas most of the studies (82%) presented a medium risk. Conclusions: Although both techniques decrease the microbial content (with reductions of 23.32%-88.47% and 23.33%-89.86% for reciprocating and rotary instrumentation, respectively), they are not able to provide complete disinfection of root canals.

• Restorative Dentistry and Endodontics
• /
• 제8권1호
• /
• pp.53-59
• /
• 1982

An in vitro study was performed in order to evaluate the restoring methods in the endodontically treated molar teeth. 68 extracted teeth were divided into 4 groups according to the restoring techniques. The teeth of first group were restored by amalgam. Those of second group were restored by the stainless steel post and amalgam. The teeth of the third group were restored by the amalgam with crown. The teeth of the fourth group were restored by the stainless steel post and amalgam core with crown. All the specimens were tested and measured for the fracture load by means of the Instron (UTM-111-500 Toyo Baldwin Co., LTD. Japan) and the Pressure Instrument (Yonsei University, Department of Metal Engineering.) The results were as follows; 1. There were no statistical differences in the fracture loads between the amalgam restoration and post-amalgam core restorative techniques. 2. The techniques of amalgam core with crown showed lower fracture loads those of post and amalgam core with crown. 3. In the crowned teeth, they presented higher fracture loads than those without crown.

• Journal of Plant Biotechnology
• /
• 제50권
• /
• pp.255-266
• /
• 2023

Hyperhydricity is a physiological anomaly that significantly affects the growth and proliferation rate of crops cultivated by tissue culture techniques. To better understand the mechanisms that govern hyperhydricity incidence, we examined the effects of several media components, particularly cytokinin and gelling agents. These elements were found to be influential in both in vitro propagation and the development of hyperhydricity. Our study revealed that Arabidopsis thaliana seedlings had a greater manifestation of hyperhydricity symptoms when exposed to high cytokinin concentrations compared with the control. The presence of gelrite led to the manifestation of hyperhydric symptoms by elevated water build-up in the apoplast. The phenomenon of stomata closure was observed in the hyperhydric leaves, resulting in an increased ability to retain water and a decrease in the transpiration rates when compared to their respective control leaves. Additionally, histological examinations of the cross sections of hyperhydric leaves revealed an irregular cellular arrangement and large intercellular spaces. Furthermore, hyperhydric seedlings displayed impaired cuticular development in comparison to their normal seedlings.

• 대한치과보철학회지
• /
• 제30권2호
• /
• pp.247-257
• /
• 1992

The present study quantitates the in vitro cytotoxicity of a variety of denture base acrylic resins using cell culture techniques combined with image analysis to measure nuclear area and DNA contents. In this study, a comparison was made among direct curing, heat curing and microwave curing resins. The results obtained from this study were as follows : 1. Morphologically, cell process and nucleus became prominent but macroscopic difference according to the resins were nit observed. In addition, increased cellular density around the specimen were observed. 2. In DNA contents measurements, $S-G_2M$ phase cell was 15.47%, 14.58% in control and heat curing resin on 1st day and the others group $21.39\sim33.36%$ were measured. 3. Nuclear area and DNA contents were increased on 3rd day except DNA content of the microwave curing resin group. These results suggest that denture base acrylic resins stimulate gingival fibroblasts in vitro, especially stimulation of direct curing resin is larger and longer than the others.