• International Journal of Industrial Entomology and Biomaterials
• /
• 제17권2호
• /
• pp.169-172
• /
• 2008

Indian tropical tasar silkworm, Antheraea mylitta D is reported to have forty four ecoraces by way of their adoption to different topographical and vegetational conditions. Of late, another ecorace 'JATA' - univoltine under in-situ condition has been explored which is localized in Thakurmunda area of the foot hills of Simlipal biosphere (Mayurbhanj district) of Orissa, India. The ecorace 'Jata' exhibits superior economic characters over widely commercialized ecoraces of Daba and Sukinda. The cocoon production of localized 'Jata' ecorace is depleting day by day in in-situ condition. In the present study, efforts were made to stabilize the ecorace 'Jata' under ex-situ condition at Ranchi (Jharkhand), where the 'Jata' ecorace silkworms were reared on Terminalia tomentosa for four successive generations during 2006 and 2007 and the cocoons were preserved in grainage house under prevailing climatic conditions. The results indicated change in voltinism behaviour of the 'Jata' ecorace from univoltine to bivoltine. The rearing performance and grainage efficiencies indicate the tendency of 'Jata' ecorace towards acclimatization and stabilization under Ranchi climatic conditions. The 'Jata' ecorace manifests the prospects for acclimatization, stabilization and commercial exploitation.

• Tribology and Lubricants
• /
• 제31권6호
• /
• pp.239-244
• /
• 2015

Chemical mechanical polishing (CMP) is one of the most important processes for enabling sub-14 nm semiconductor manufacturing. Moreover, post-CMP defect control is a key process parameter for the purpose of yield enhancement and device reliability. Due to the complexity of device with sub-14 nm node structure, CMP-induced defects need to be fixed in the CMP in-situ cleaning module instead of during post ex-situ wet cleaning. Therefore, post-CMP in-situ cleaning optimization and cleaning efficiency improvement play a pivotal role in post-CMP defect control. CMP in-situ cleaning module normally consists of megasonic and brush scrubber processes. And there has been an increasing effort for the optimization of cleaning chemistry and brush scrubber cleaning in the CMP cleaning module. Although there have been many studies conducted on improving particle removal efficiency by brush cleaning, these studies do not consider the effects of brush contamination. Depending on the process condition and brush condition, brush cross contamination effects significantly influence post-CMP cleaning defects. This study investigates brush cross contamination effects in the CMP in-situ cleaning module by conducting experiments using 300mm tetraethyl orthosilicate (TEOS) blanket wafers. This study also explores brush pre-treatment in the CMP tool and proposes recipe effects, and critical process parameters for optimized CMP in-situ cleaning process through experimental results.

• Geomechanics and Engineering
• /
• 제21권6호
• /
• pp.527-536
• /
• 2020

An elastic-plastic solution for cavity expansion problem considering strength degradation, undrained condition and initial anisotropic in-situ stress is established based on the Tresca yield criterion and cavity expansion theory. Assumptions of large-strain for plastic region and small-strain for elastic region are adopted, respectively. The initial in-situ stress state of natural soil mass may be anisotropic caused by consolidation history, and the strength degradation of soil mass is caused by structural damage of soil mass in the process of loading analysis (cavity expansion process). Finally, the published solutions are conducted to verify the suitability of this elastic-plastic solution, and the parametric studies are investigated in order to the significance of this study for in-situ soil test.

• 한국세라믹학회지
• /
• 제51권2호
• /
• pp.132-137
• /
• 2014

The study was performed with low-grade limestone, which is used to make cement or is disposed of due to its low CaO content. In this study, the optimal condition of limestone with which to manufacture precipitated calcium carbonate (PCC) and limestone in fiber was determined through in-situ reactions. The best firing condition is with slaked lime with rapid cooling after 2 h of firing at $1000^{\circ}C$. In addition, the content of CaO can be increased by sorting the low-grade limestone using a 200 mesh filter, and the optical quality of old newspaper (ONP) was similar when using both low-grade and high-grade limestone. Also, controlling the particle size of PCC is an important factor pertaining to the optical characteristics of paper.

• 한국지반신소재학회논문집
• /
• 제11권1호
• /
• pp.47-56
• /
• 2012

PBD의 통수능력은 지반조건 빛 두께에 비례하여 영향을 크게 받는 성질이 있으며, 배수재 타입 시 시용되는 맨드럴, 타입기기 및 방식에 의한 주변지반의 교란영향으로 배수성능이 저하되는 문제점 등이 있다. 또한, 여러 기지 조건에 따라 통수능의 편차가 크게 나타나며 원지반 조건에 따라 배수재의 통수능 저하, 간극수압소산의 시간지연 등의 분석이 미흡하다. 따리서 본 연구에서는 원지반 조건을 고려한 연직배수재의 복합 통수능 시험을 실시하여 지반개량 및 통수능 평가를 하였다. ${\phi}\;38{\times}70cm$ 크기의 원통형 실린더에 배수재를 고정한 후 교반한 시료를 투기하고 원지반 조건 CL, ML, SM과 준설토 CL을 매립한 후 가입장치를 사용하여 30, 70, 120 kpa의 하중을 가해 단계별로 복합통수능 실험을 수행하였다. 시험결과, 통수능의 크기는 원지반 조건이 SM>ML>CL>CL(준설토)인 순으로, 세립분 함량이 적을수록 통수량은 크게 나타났다.

• Nuclear Engineering and Technology
• /
• 제46권6호
• /
• pp.737-752
• /
• 2014

As condition-based maintenance (CBM) has risen as a new trend, there has been an active movement to apply information technology for effective implementation of CBM in power plants. This motivation is widespread in operations and maintenance, including monitoring, diagnosis, prognosis, and decision-making on asset management. Thermal efficiency analysis in nuclear power plants (NPPs) is a longstanding concern being updated with new methodologies in an advanced IT environment. It is also a prominent way to differentiate competitiveness in terms of operations and maintenance costs. Although thermal performance tests implemented using industrial codes and standards can provide officially trustworthy results, they are essentially resource-consuming and maybe even a hind-sighted technique rather than a foresighted one, considering their periodicity. Therefore, if more accurate performance monitoring can be achieved using advanced data analysis techniques, we can expect more optimized operations and maintenance. This paper proposes a framework and describes associated methodologies for in-situ thermal performance analysis, which differs from conventional performance monitoring. The methodologies are effective for monitoring, diagnosis, and prognosis in pursuit of CBM. Our enabling techniques cover the intelligent removal of random and systematic errors, deviation detection between a best condition and a currently measured condition, degradation diagnosis using a structured knowledge base, and prognosis for decision-making about maintenance tasks. We also discuss how our new methods can be incorporated with existing performance tests. We provide guidance and directions for developers and end-users interested in in-situ thermal performance management, particularly in NPPs with large steam turbines.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.795-800
• /
• 2008

The sound transmission loss is a key index to evaluate the acoustic performance of a car-body structure at the high frequency range. From this paper, a new validation method for in-situ sound transmission loss is proposed. First, in-situ sound transmission loss is measured by using PU intensity probe on the condition of complete vehicle. Second, validation test, which is consisted of internal, external and total frequency response function test, is performed by using volume acceleration source and microphones. Then, these test results are compared to validate the accuracy of in-situ sound transmission loss. Finally, the test result of in-site method is compared with results of two reverberant room test method and SEA analytical method. The reliability of in-situ method is confirmed by these procedures.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.78-79
• /
• 2003

타원법(ellipsometry)을 사용하여 광기록 매체용 Ge$_2$Sb$_2$Te／sub 5／(GST) 박막의 성장과정에 따른 타원상수 Ψ와 $\Delta$를 측정하여, GST 박막의 최적성장조건을 연구하였다. 아르곤기체압력과 DC 출력 그리고 기판의 온도를 변화시키면서 GST 박막을 성장시켰다. 제작된 시료들의 분광타원 데이터를 모델링분석하여 GST 박막의 밀도분포를 구하고 한편으로는 GST 박막이 성장하는 동안 측정한 in situ 타원 성장곡선을 분석하여 박막의 밀도분포의 변화를 추적하였다. (중략)

• Geomechanics and Engineering
• /
• 제19권2호
• /
• pp.141-151
• /
• 2019

A novel theoretical solution is presented for created (zero initial radius) cavity expansion problem based on CamClay model and considers the effect of initial anisotropic in-situ stress and drained conditions. Here the strain of this theoretical solution is small deformation in elastic region and large deformation in plastic region. The works for cylindrical and spherical cavities expanding in drained condition from zero initial radius are investigated. Most of the conventional solutions were based on the isotropic and undrained condition, however, the initial stress state of natural soil mass is anisotropy by soil deposition history, and drained cavity expansion calculation is closer to actual engineering in permeable soil mass. Finally, the parametric study is presented in order to the engineering significance of this work.

• Tribology and Lubricants
• /
• 제27권3호
• /
• pp.147-155
• /
• 2011

The ceramic coatings are excellent materials of cutting tools and sliding parts. To evaluate the wear characteristics of very thin ceramic coated layer, it is very important to investigate its wear process microscopically. An effective method for investigating the wear of a thin layer is the observation of wear process in microscopic detail using in-situ system. In this study, using the SEM Tribosystem as in-situ system, the microscopic wear mode of TiN coatings was investigated in repeated sliding. As results, four modes were observed for TiN coatings: Ploughing, powder formation, flake formation and coating delimitation. The observation of the microscopic wear by in-situ system can clarify the allowable stress of TiN coating.