• 제목/요약/키워드: In-situ Observation

검색결과 273건 처리시간 0.026초

다중 원격탐사 자료를 활용한 해양 오염 추적 모의 실험 방안에 대한 연구 (Simulation Approach for the Tracing the Marine Pollution Using Multi-Remote Sensing Data)

  • 김근용;김의현;최준명;신지선;김원국;이광재;손영백;유주형
    • 대한원격탐사학회지
    • /
    • 제36권2_2호
    • /
    • pp.249-261
    • /
    • 2020
  • 다중 플랫폼/센서를 활용한 연안 모니터링은 연안 해양환경 변화와 다양한 재해/재난을 높은 시공간 해상도로 정확하게 이해하기 위한 매우 중요한 수단이다. 하지만 다중 플랫폼과 센서를 복합적으로 이용한 통합 관측 연구는 미비한 실정이고, 통합 관측을 통한 효율성, 융합 한계성 등에 대해 평가된 바 없다. 본 연구에서는 다중 원격탐사 플랫폼/센서를 이용한 모의실험을 통해 통합 관측 방법을 제시하고, 그 효용성과 한계점을 진단하였다. 다양한 해양 재해, 재난을 모사하기 위하여 Rhodamine WT (RWT) 형광염료를 이용하여 통합 현장조사를 수행하였다. 2019년 9월 남해-여수 해역에 형광염료를 주입 후 위성(Kompsat-2/3/3A, Landsat-8 Operational Land Imager (OLI), Sentinel-3 Ocean and Land Colour Instrument (OLCI), GOCI), 무인항공기 (Mavic 2 pro, Inspire 2), 유인항공기 플랫폼을 이용하여 염료 패치의 분포와 이동을 탐지하였다. 형광염료 주입 초기 패치 규모는 2,600 ㎡ 이었고, 약 138분 후 62,000 ㎡ 규모까지 확산되었다. RWT 패치는 처음 주입된 지점으로 부터 점차 남서 방향으로 이동하였고, 이는 현장 모의 실험이 진행되는 동안 조위(고조: 7시 7분(286 cm), 저조: 13시 9분(73 cm))가 점차 낮아짐에 따라 조석이 남동 방향으로 흐르는 것과 유사하였다. 무인항공기 영상은 공간해상도와 시간해상도 측면에서 가장 높은 해상력을 보인 반면 탐지 영역이 가장 좁았다. 위성의 경우 탐지 영역은 넓었지만 재방문 주기가 길기 때문에 운용성 측면에서 타 플랫폼과 비교하여 다소 한계가 있었다. 또한 Sentinel-3 OLCI와 GOCI의 경우 분광해상도와 신호 대 잡음비(signal to noise ratio)가 가장 높았지만 소규모 형광염료 탐지에는 공간해상도 측면에서 제한적이었다. 유인항공기에 탑재된 초다분광 영상의 경우 분광해상도가 가장 높았지만 이 역시 운용성 측면에서 다소 제한적이었다. 다중 플랫폼 통합관측 연구를 통해 시간과 공간뿐만 아니라 분광 해상력 증가 향상을 확인 가능하였다. 향후 이 연구 결과가 연안 수치모델과 연계된다면 오염 물질의 이동확산 예측이 가능할 것으로 생각되고, 수치모델의 입력 및 검증 자료로 활용하여 모델 정확도 향상에 기여할 수 있을 것으로 기대된다.

Field Studios of In-situ Aerobic Cometabolism of Chlorinated Aliphatic Hydrocarbons

  • Semprini, Lewts
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
    • /
    • pp.3-4
    • /
    • 2004
  • Results will be presented from two field studies that evaluated the in-situ treatment of chlorinated aliphatic hydrocarbons (CAHs) using aerobic cometabolism. In the first study, a cometabolic air sparging (CAS) demonstration was conducted at McClellan Air Force Base (AFB), California, to treat chlorinated aliphatic hydrocarbons (CAHs) in groundwater using propane as the cometabolic substrate. A propane-biostimulated zone was sparged with a propane/air mixture and a control zone was sparged with air alone. Propane-utilizers were effectively stimulated in the saturated zone with repeated intermediate sparging of propane and air. Propane delivery, however, was not uniform, with propane mainly observed in down-gradient observation wells. Trichloroethene (TCE), cis-1, 2-dichloroethene (c-DCE), and dissolved oxygen (DO) concentration levels decreased in proportion with propane usage, with c-DCE decreasing more rapidly than TCE. The more rapid removal of c-DCE indicated biotransformation and not just physical removal by stripping. Propane utilization rates and rates of CAH removal slowed after three to four months of repeated propane additions, which coincided with tile depletion of nitrogen (as nitrate). Ammonia was then added to the propane/air mixture as a nitrogen source. After a six-month period between propane additions, rapid propane-utilization was observed. Nitrate was present due to groundwater flow into the treatment zone and/or by the oxidation of tile previously injected ammonia. In the propane-stimulated zone, c-DCE concentrations decreased below tile detection limit (1 $\mu$g/L), and TCE concentrations ranged from less than 5 $\mu$g/L to 30 $\mu$g/L, representing removals of 90 to 97%. In the air sparged control zone, TCE was removed at only two monitoring locations nearest the sparge-well, to concentrations of 15 $\mu$g/L and 60 $\mu$g/L. The responses indicate that stripping as well as biological treatment were responsible for the removal of contaminants in the biostimulated zone, with biostimulation enhancing removals to lower contaminant levels. As part of that study bacterial population shifts that occurred in the groundwater during CAS and air sparging control were evaluated by length heterogeneity polymerase chain reaction (LH-PCR) fragment analysis. The results showed that an organism(5) that had a fragment size of 385 base pairs (385 bp) was positively correlated with propane removal rates. The 385 bp fragment consisted of up to 83% of the total fragments in the analysis when propane removal rates peaked. A 16S rRNA clone library made from the bacteria sampled in propane sparged groundwater included clones of a TM7 division bacterium that had a 385bp LH-PCR fragment; no other bacterial species with this fragment size were detected. Both propane removal rates and the 385bp LH-PCR fragment decreased as nitrate levels in the groundwater decreased. In the second study the potential for bioaugmentation of a butane culture was evaluated in a series of field tests conducted at the Moffett Field Air Station in California. A butane-utilizing mixed culture that was effective in transforming 1, 1-dichloroethene (1, 1-DCE), 1, 1, 1-trichloroethane (1, 1, 1-TCA), and 1, 1-dichloroethane (1, 1-DCA) was added to the saturated zone at the test site. This mixture of contaminants was evaluated since they are often present as together as the result of 1, 1, 1-TCA contamination and the abiotic and biotic transformation of 1, 1, 1-TCA to 1, 1-DCE and 1, 1-DCA. Model simulations were performed prior to the initiation of the field study. The simulations were performed with a transport code that included processes for in-situ cometabolism, including microbial growth and decay, substrate and oxygen utilization, and the cometabolism of dual contaminants (1, 1-DCE and 1, 1, 1-TCA). Based on the results of detailed kinetic studies with the culture, cometabolic transformation kinetics were incorporated that butane mixed-inhibition on 1, 1-DCE and 1, 1, 1-TCA transformation, and competitive inhibition of 1, 1-DCE and 1, 1, 1-TCA on butane utilization. A transformation capacity term was also included in the model formation that results in cell loss due to contaminant transformation. Parameters for the model simulations were determined independently in kinetic studies with the butane-utilizing culture and through batch microcosm tests with groundwater and aquifer solids from the field test zone with the butane-utilizing culture added. In microcosm tests, the model simulated well the repetitive utilization of butane and cometabolism of 1.1, 1-TCA and 1, 1-DCE, as well as the transformation of 1, 1-DCE as it was repeatedly transformed at increased aqueous concentrations. Model simulations were then performed under the transport conditions of the field test to explore the effects of the bioaugmentation dose and the response of the system to tile biostimulation with alternating pulses of dissolved butane and oxygen in the presence of 1, 1-DCE (50 $\mu$g/L) and 1, 1, 1-TCA (250 $\mu$g/L). A uniform aquifer bioaugmentation dose of 0.5 mg/L of cells resulted in complete utilization of the butane 2-meters downgradient of the injection well within 200-hrs of bioaugmentation and butane addition. 1, 1-DCE was much more rapidly transformed than 1, 1, 1-TCA, and efficient 1, 1, 1-TCA removal occurred only after 1, 1-DCE and butane were decreased in concentration. The simulations demonstrated the strong inhibition of both 1, 1-DCE and butane on 1, 1, 1-TCA transformation, and the more rapid 1, 1-DCE transformation kinetics. Results of tile field demonstration indicated that bioaugmentation was successfully implemented; however it was difficult to maintain effective treatment for long periods of time (50 days or more). The demonstration showed that the bioaugmented experimental leg effectively transformed 1, 1-DCE and 1, 1-DCA, and was somewhat effective in transforming 1, 1, 1-TCA. The indigenous experimental leg treated in the same way as the bioaugmented leg was much less effective in treating the contaminant mixture. The best operating performance was achieved in the bioaugmented leg with about over 90%, 80%, 60 % removal for 1, 1-DCE, 1, 1-DCA, and 1, 1, 1-TCA, respectively. Molecular methods were used to track and enumerate the bioaugmented culture in the test zone. Real Time PCR analysis was used to on enumerate the bioaugmented culture. The results show higher numbers of the bioaugmented microorganisms were present in the treatment zone groundwater when the contaminants were being effective transformed. A decrease in these numbers was associated with a reduction in treatment performance. The results of the field tests indicated that although bioaugmentation can be successfully implemented, competition for the growth substrate (butane) by the indigenous microorganisms likely lead to the decrease in long-term performance.

  • PDF

NEXAFS 분광법에 의한 Alq3/Ba과 Alq3/Au의 계면에서의 전자 천이에 관한 연구 (A Study on the Electron Transfer at the Alq3/Ba and Alq3/Au Interfaces by NEXAFS Spectroscopy)

  • 임수용;주성후;양재웅
    • 한국표면공학회지
    • /
    • 제45권1호
    • /
    • pp.15-19
    • /
    • 2012
  • Tris(8-quinolinolato)aluminum(III); $Alq_3$ has been frequently used as an electron transporting layer in organic light-emitting diodes. Either Ba with a low work function or Au with a high work function was deposited on $Alq_3$ layer in vacuum. And then, the behaviors of electron transition at the $Alq_3$/Ba and $Alq_3$/Au interfaces were investigated by using the near edge x-ray absorption fine structure (NEXAFS) spectroscopy. In the each interface, the energy levels of unoccupied obitals were assigned as ${\pi}^*$(LUMO, LUMO+1, LUMO+2 and LUMO+3) and ${\sigma}^*$. And the relative intensities of these peaks were investigated. In an oxygen atom composing $Alq_3$ molecule, the relative intensities for a transition from K-edge to LUMO+2 were largely increased as Ba coverage (${\Theta}_{Ba}$, 2.7 eV) with a low work function was in-situ sequentially increased on $Alq_3$ layer. In contrast, the relative intensities for the LUMO+2 peak were reduced as Au coverage (${\Theta}_{Au}$, 5.1 eV) with a high work function were increased on $Alq_3$ layer. This means that the electron transition by photon in oxygen atom which consists in the unoccupied orbitals in $Alq_3$ molecule, largely depends on work function of a metal. Meanwhile, in the case of electron transition in a carbon atom, as ${\Theta}_{Ba}$ was increased on $Alq_3$, the relative intensity from K-edge to ${\pi}_1{^*}$ (LUMO and LUMO+1) was slightly decreased, and from K-edge to ${\pi}_2{^*}$ (LUMO+2 and LUMO+3) was somewhat increased. This rising of the energy state from ${\pi}_1{^*}$ to ${\pi}_2{^*}$ exhibits that electrons provided by Ba would contribute to the process of electron transition in the $Alq_3$/Ba interfaces. As shown in above observation, the analyses of NEXAFS spectra in each interface could be important as a basic data to understand the process of electron transition by photon in pure organic materials.

위성원격탐사를 이용한 동해 원산연안의 재발생 와동류 연구 (Study of a Recurring Anticyclonic Eddy off Wonsan Coast in Northern Korea Using Satellite Tracking Drifter, Satellite Ocean Color and Sea Surface Temperature Imagery)

  • 서영상;장이현;김정희
    • 대한원격탐사학회지
    • /
    • 제16권3호
    • /
    • pp.211-220
    • /
    • 2000
  • 위성자료를 이용하여 동해북부 원산 연근해역의 재발생 와동류에 대한 형태변동, 유속, 발생기작 등을 연구하였다. 1999년 1월 4일부터 3월 18일까지의 기간에 대한 ARGOS의 표류부이 자료(위치정보 및 수온), NOAA 위성의 AVHRR 자료(표면수온) 그리고 Orbview-2 위성의 SeaWiFS 자료(클로로필 a)를 이용하여 재발생 와동류의 수평공간 규모를 파악하였다. 또한 재발생 와동류의 기작과 변동원인을 규명하고자 속초와 울릉도에서의 풍향, 풍속자료, 묵호-울릉도간 해수면 차 값 및 해저지형과 와동류에 포획되어 있는 표류부이의 시.공간적 위치변동간의 상관정도를 파악하였다. 원산 연안해역에서의 와동류의 72일간 평균유속은 153 km/h (42 cm/sec)로 분석되었다. 이 와동류는 cold core, 시계방향의 회전, 직경 110 km의 수평공간을 가진 재발생 와동류로서 와동류의 중심은 위도 $39^{\circ}N$, 경도 $129^{\circ}E$로 분석되었다.

조류의 영향을 받는 준설매립지역에서 지하수위 이력을 고려한 계측침하 분석에 관한 연구 (A Study on the Analysis of Monitoring Settlement Considering the History of the Groundwater Level in the Dredged Landfill Area Affected by Algae)

  • 장지건;손수원;홍석우
    • 한국지반공학회논문집
    • /
    • 제37권7호
    • /
    • pp.13-23
    • /
    • 2021
  • 연약한 점성토나 유기질토로 구성된 지반위에 도로, 교량, 건물 등이 축조된다면 침하량이 과대하여지고, 지지력이 부족하여 침하 및 안정성 등 지반 공학적으로 많은 문제점들이 발생될 수 있다. 극단적인 경우, 축조된 구조물의 전단파괴 또는 붕괴로 까지 나타날 수 있어, 지반의 강도증가 및 침하억제 등을 위한 지반개량공법이 필수적으로 요구된다. 본 연구에서는 점토로 준설매립된 지반에서의 침하량 예측 시 중요한 요소 중 하나인 지하수위 조건에 대하여 계측결과를 이용하여 각 지하수위 조건에 따른 침하량을 분석하고 준공 5년 후의 발생침하량과 비교하여 침하분석 시 적용 지하수위 조건에 대해 제안하였다. 분석 결과, 침하분석 시의 지하수위는 시공중에는 계측 지하수위를 적용하고, 공용중에는 소조평균저조위(L.W.O.N.T)를 적용하는 것이 합리적일 것으로 판단된다. 또한, 점토로 준설매립된 지역의 경우 원지반점토층 상부 통수층에서의 수두 관측결과와 원지반점토층 하부 통수층에서의 수두가 다르게 나타났으며, 이로 인하여 점토층에서 작용하는 수압은 비선형적일 것으로 추정된다.

저토피부 암거상부 포장의 도상피해 예방을 위한 단명설계 (A design guide to minimize frost heave in unbound pavement layers over box culverts)

  • 서영국
    • 한국도로학회논문집
    • /
    • 제9권3호
    • /
    • pp.111-121
    • /
    • 2007
  • 지난 2005년 12월 호남지역에 내린 폭설과 연이은 한파로 서해안고속도로와 호남고속도로에 많은 피해가 보고되었다. 특히 2.0m 이하의 저토피고를 갖는 통로 암거 상부의 포장에 최대 6.0cm 높이의 노면 융기와 횡방향 균열이 발생하였다. 이는 포장의 수명단축 및 공용성 저하, 교통사고 발생 등에 영향을 미치기 때문에 시급한 대책마련이 요구되었다. 현장 조사 결과 단기간에 증가한 침투수가 노상과 노체에 함유된 세립분의 영향으로 포장 내부의 배수가 지연되고 저온에서 발생한 동상이 포장 파손의 일차적인 원인으로 지적되었다. 최근 한국도로공사는 도로교통기술원과 공동연구를 통해서 신설되는 암거상부 포장에 대한 새로운 설계안을 제시하였다. 본 설계안은 암거 상단부에 맹암거를 설치하여 침투수의 원활한 배수를 유도하고 간극수압의 저감을 통해 포장하부의 동상을 예방하고자 한다. 본 논문에서는 위의 설계법 개발을 위해서 수행한 실험과 수치해석결과를 다루고 있다. 현장에서 채취한 지반시료에 대한 점토함유량 분석을 실시하고 2차원 유한요소해석을 실시하여 골재 입경에 따른 침투류의 배수특성을 조사하였다. 저토피고(2.0m 이하) 암거 상부 포장에 적용될 맹암거의 규격은 침투류 해석결과와 현장 시공성을 고려하여 폭과 높이를 각각 400mm, 800mm로 결정하였다.

  • PDF

A topological metal at the surface of an ultrathin BiSb alloy film

  • Hirahara, T.;Sakamoto, Y.;Saisyu, Y.;Miyazaki, H.;Kimura, S.;Okuda, T.;Matsuda, I.;Murakami, S.;Hasegawa, S.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.14-15
    • /
    • 2010
  • Recently there has been growing interest in topological insulators or the quantum spin Hall (QSH) phase, which are insulating materials with bulk band gaps but have metallic edge states that are formed topologically and robust against any non-magnetic impurity [1]. In a three-dimensional material, the two-dimensional surface states correspond to the edge states (topological metal) and their intriguing nature in terms of electronic and spin structures have been experimentally observed in bulk Bi1-xSbx single crystals [2,3,4]. However, if we want to know the transport properties of these topological metals, high purity samples as well as very low temperature will be needed because of the contribution from bulk states or impurity effects. In a recent report, it was also shown that an intriguing coupling between the surface and bulk states will occur [5]. A simple solution to this bothersome problem is to prepare a topological metal on an ultrathin film, in which the surface-to-bulk ratio is drastically increased. Therefore in the present study, we have investigated if there is a method to make an ultrathin Bi1-xSbx film on a semiconductor substrate. From reflection high-energy electron diffraction observation, it was found that single crystal Bi1-xSbx films (0${\sim}30\;{\AA}A$ can be prepared on Si(111)-$7{\times}7$. The transport properties of such films were characterized by in situ monolithic micro four-point probes [6]. The temperature dependence of the resistivity for the x=0.1 samples was insulating when the film thickness was $240\;{\AA}A$. However, it became metallic as the thickness was reduced down to $30\;{\AA}A$, indicating surface-state dominant electrical conduction. Figure 1 shows the Fermi surface of $40\;{\AA}A$ thick Bi0.92Sb0.08 (a) and Bi0.84Sb0.16 (b) films mapped by angle-resolved photoemission spectroscopy. The basic features of the electronic structure of these surface states were shown to be the same as those found on bulk surfaces, meaning that topological metals can be prepared at the surface of an ultrathin film. The details will be given in the presentation.

  • PDF

메밀의 망실재배시 종자생산성 향상을 위한 수분곤충의 선발과 활용법 구명 (Selection and Application of Pollinating Insects to Improve Seed Production of Buckwheat in Net House)

  • 김수정;손황배;남정환;이종남;서종택;장동칠;김율호
    • 한국자원식물학회지
    • /
    • 제35권1호
    • /
    • pp.10-22
    • /
    • 2022
  • 메밀을 대상으로 주산지, 해발고도별, 재배작형별 방화곤충의 종류와 밀도를 조사하였다. 이를 바탕으로 선발된 수분곤충을 망실 격리재배에 처리하여 수량성 등 농업적 형질을 검토하였다. 메밀 주산지에서 방화곤충 비율은 파리목이 71%로 대부분을 차지하였으며, 그 다음으로 나비목, 벌목, 딱정벌레 순이었다. 해발고도별로는 고랭지 및 준고랭지 지역에서 파리목이 72-98%의 높은 비율을 보였으나, 평난지인 강릉에서는 비율이 50%로 낮았다. 재배작형별로 파리목은 봄재배에서 71%의 비율을 보여 가을재배보다 1.2배 높았으나, 벌목의 경우 가을재배에서 8%로 봄재배보다 4.8배 높아 방화곤충 비율에서 뚜렷한 차이를 보였다. 메밀 재배지역과 작형에서 가장 많이 관찰된 파리목에는 집파리, 연두금파리, 고자리파리, 기타 초파리목이 주로 관찰되었으며, 벌목에서는 꿀벌, 기생벌 등이 발견되었다. 노지재배(관행)와 비교하여 망실에서 파리목이나 뒤영벌의 수분매개효과가 우수하여 수량이 높았으며, 단독 처리보다는 혼합처리에서 다소 높았다. 이상의 결과를 볼 때, 메밀에서는 파리목이나 벌류가 가장 활발한 수분곤충 역할을 하는 것으로 구명되었으며, 메밀 생산성 향상을 위해 선발된 곤충을 적극 활용할 필요가 있다고 판단된다.

무인카메라 기반 산악지역 식물계절 및 적설 탐지 기술 개발 (Development of Plant Phenology and Snow Cover Detection Technique in Mountains using Internet Protocol Camera System)

  • 장근창;김재철;천정화;장석일;안치현;김봉철
    • 한국농림기상학회지
    • /
    • 제24권4호
    • /
    • pp.318-329
    • /
    • 2022
  • 본 연구를 통해 설계된 테스트베드 지역의 식물계절 관측과 적설 탐지는 반복 이미지 학습 및 정량적 RGB 분석을 통해 정확도 높은 산림 식물계절 및 적설 관측 기반을 마련하였다. 무인카메라 기반 식물계절 및 적설 탐지 기술 개발은 복잡한 산악지형이라는 특수한 환경에서 다양한 고도의 환경 데이터를 실시간 수집하는 체계를 구축함으로써 산림환경 연구를 위한 기초 데이터를 수집하는 계기가 되었다. 첨단기술을 활용한 주요 산악지역의 식물계절 변화 탐지 연구는 산림청에서 제공하는 개화 및 개엽 예측 정보의 검증과 산림휴양쾌적지수 고도화 등에 활용 가능하며, 향후 농림위성의 NDVI 등 영상 이미지의 검⋅보정용 자료로써 활용 가치가 매우 높다. 무인카메라 활용 기술은 산림 식물계절 및 적설 탐지뿐만 아니라 산림재해 감시 및 산림관리 등 다양한 산림분야에서도 활용될 수 있을 것으로 기대된다.

실내모형실험에 의한 핵석 풍화대 지반 특성 산정 (Characterization of Weathered Zone bearing Corestones through Scale Model Test)

  • 우익
    • 지질공학
    • /
    • 제17권3호
    • /
    • pp.435-443
    • /
    • 2007
  • 본 연구에서는 풍화대에 분포하고 있는 핵석지반에 대한 지질공학적 조사와 실내모형실험을 통하여 핵석지반의 공학적 물성을 산정하였다. 핵석이 노출된 세 곳의 산사면에 대한 조사창 조사와 시추공 코어 관찰로 핵석의 분포도와 기하학적 모양을 분석하였다. 현장 핵석분포 및 크기에 대한 조사 자료와 모형실험용 공시체 시편의 크기를 바탕으로 산정된 축소율을 고려하여 5mm이하-평균 2mm의 분쇄-연마된 핵석시료를 실내핵석 실험용으로 사용하였다. 핵석 체적함유비를 0%, 10%, 20%로 달리하면서 토양 직접전단시험 및 석고모형실험을 실시하였고, 이를 통하여 핵석지반의 특성을 구하고자 하였다. 핵석함유 토양의 직접전단실험에서는 핵석 함유량의 증가로 인하여 전단강도가 증가하는 경향을 보여주었다. 핵석함유비가 20%일 경우는 핵석 입자의 맞물림에 의한 점착력의 증가가 마찰각의 변화보다 더욱 전단강도의 상승을 유발시키는 요소로 작용하였다. 핵석 함유비를 달리한 석고모형실험에서는 핵석이 많아질수록 모형시료의 강도 및 탄성계수가 증가하는 경향을 보여주었다. 석고모형실험에서 얻어진 핵석 함유량에 따른 모형의 물성변화률을 현장에서 측정한 풍화대의 물성과 비교하여, 현장에서 핵석함유에 따른 물성을 예측한 결과, 핵석 함유가 0%에서 10%로 증가하면 15%의 일축압축강도 증가를, 핵석 함유가 20%로 증가되면 30%의 일축압축강도 증가를 유발하는 것으로 예측이 되었다.