• 한국공간구조학회논문집
• /
• 제2권1호
• /
• pp.85-92
• /
• 2002

Two way grid single-layer domes are of great advantage in fabrication and construction because of the simple fact that they have only four members at each junction. But, from a point of view of mechanics, the rectangular latticed pattern gives rise to a nonuniform rigidity-distribution in the circumferential direction. If the equivalent rigidity is considered in the axial direction of members, the in-plane equivalent shearing rigidity depends only on the in-plane bending rigidity of members and its value is very small in comparison to that of the in-plane equivalent stretching rigidity. It has a tendency to decrease buckling -strength of dome considerably by external force. But it is possible to increase buckling strength by the use of roofing covering materials connected to framework. In a case like this, shearing rigidity of roofing material increases buckling strength of the overall structure and can be designed economically from the viewpoint of practice. Therefore, the purpose of this paper, in Lamella dome and rectangular latticed dome that are a set of 2-way grid dome, is to clarify the effects of roofing covering materials for increasing of buckling strength of overall dome. Analysis method is based on FEM dealing with the geometrically nonlinear deflection problems. The conclusion were given as follows: 1. In case of Lamella domes which have nearly equal rigidity in the direction of circumference, the rigidity of roofing covering materials does not have a great influence on buckling-strength, but in rectangular latticed domes that has a clear periodicity of rigidity, the value of its buckling strength has a tendency to increase considerably with increasing rigidity of roofing covering materials 2. In case of rectangular latticed domes, as rise-span-ratio increases, models which is subjected to pressure -type-uniform loading than vertical-type-uniform loading are higher in the aspects of the increasing rate of buckling- strength according to the rate of shear reinforcement rigidity, but in case of Lamella dome, the condition of loading and rise-span-ratio do not have a great influence on the increasing rate of buckling strength according to the rate of shear reinforcement rigidity.

• 대한수학회보
• /
• 제59권2호
• /
• pp.351-360
• /
• 2022

We prove that a punctured-torus group of hyperbolic 4-space which keeps an embedded hyperbolic 2-plane invariant has a strictly parabolic commutator. More generally, this rigidity persists for a punctured-surface group.

• Advances in nano research
• /
• 제8권3호
• /
• pp.229-244
• /
• 2020

In this paper, modified Kelvin's model has been used to analyze the orthotropic vibration frequencies of single walled carbon nanotubes with clamped-clamped and clamped-free boundary conditions. For this system the governing equation is developed with wave propagation approach. Armchair, zigzag and chiral structures are considered for the vibrational analysis to investigate the effect of different modes, in-plane rigidity and mass density per unit lateral area. Throughout the computations, on decreasing the length-to-diameter ratios, the frequencies of said structure increases. In addition, by increasing three different value of in-plane rigidity resulting frequencies also increase and frequencies decrease on increasing mass density per unit lateral area. The results generated using computer software MATLAB to furnish the evidence regarding applicability of present model and also verified by available published literature.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2002년도 추계공동학술대회논문집
• /
• pp.107-112
• /
• 2002

기본적으로 선박의 판 부재로 구성되어 있고 선체구조의 전체적인 강도는 선체판의 강도와 강성에 지배를 받게 된다. 만약 국부적인 좌굴이 발생하게 되면 선체판의 강도는 급격하게 감소하게 된다 이러한 좌굴현상은 선박구조 전체에 심각한 영향을 미치게 되는데 좌굴은 구조강도평가에 있어서 중요한 실계요소 중 한가지이다. 이 연구논문에서는 압축하중이 작용하고 있는 선체판에 대해서 면내하중 변화를 연구하였으며 제안된 면내하중식은 탄성 혹은 탄소성 영역에서 좀더 만족할만한 설계를 하는데 있어서 좀더 효율적이라고 판단된다.

• Structural Engineering and Mechanics
• /
• 제28권3호
• /
• pp.281-294
• /
• 2008

In this paper, linear elastic isotropic structures under the effects of both stochastic operators and stochastic excitations are studied. The analysis utilizes the spectral stochastic finite elements (SSFEM) with its two main expansions namely; Neumann and Homogeneous Chaos expansions. The random excitation and the random operator fields are assumed to be second order stochastic processes. The formulations are obtained for the system solution of the two dimensional problems of plane strain and plate bending structures under stochastic loading and relevant rigidity using the previously mentioned expansions. Two finite element programs were developed to incorporate such formulations. Two illustrative examples are introduced: the first is a reinforced concrete culvert with stochastic rigidity subjected to a stochastic load where the culvert is modeled as plane strain problem. The second example is a simply supported square reinforced concrete slab subjected to out of plane loading in which the slab flexural rigidity and the applied load are considered stochastic. In each of the two examples, the first two statistical moments of displacement are evaluated using both expansions. The probability density function of the structure response of each problem is obtained using Homogeneous Chaos expansion.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.253-259
• /
• 2000

This thesis investigated the behavior of super structure by varying the factors such as the change of pile rigidity, the characteristics of soil and the constraint condition of support. The results of this study are as follows; 1. The pile rigidity in the Fig 3.3 computed by the rotating deformed plane method becomes the elastic range at approximately about 5.1 m (D : 1.0 m) below the ground level. This result is consistent with the previous study that the pile deformation occurs approximately 3 to 6 times pile diameter from the pile head. 2. The values of forces and deformations for the structure-pile system in Y-direction appeared larger than that in X-direction, since the pile rigidity and constraint condition of support were changed as shown Fig.3.5 to 3.8. 3. The current practice for the analysis of structure-pile system has not considered the variation of pile rigidity and the constraint condition of support. So, the analysis of structure-pile system with large difference in super-structure rigidity must includes these factors in both X and Y directions.

• 한국강구조학회 논문집
• /
• 제17권2호통권75호
• /
• pp.161-171
• /
• 2005

대칭 하중을 받는 아치 리브의 경우 면내 강성이 가해지는 하중에 비하여 작은 경우 예기치 않게 면내 방향으로 좌굴이 발생하게 된다. 아치 리브의 종국 면내 좌굴 강도는 재료의 비탄성이 고려되어야 한다. 하지만 탄성 면내 좌굴 강도는 세장비가 큰 경우에는 재료의 탄성 범위에서 좌굴이 발생하기도 하며, 세장비가 작은 경우에도 아치의 지간이나 라이즈, 단면의 개략적인 형태를 결정하는 초기 설계에 유용하게 사용된다. 본 논문에서는 아치 교량의 설계에 자주 이용되는 대칭 하중을 받는 포물선 아치 리브의 형상에 관하여 비선형 유한 요소 해석을 사용하여 탄성 면내 좌굴 강도에 대하여 연구를 수행 하였다. 연구 결과 기존의 탄성 좌굴 이론에서는 휨강성과 탄성 좌굴 강도는 비례하지만, 비선형 해석 결과 아치 단면의 세장비가 작을 경우 휨강성과 아치의 탄성 좌굴 강도가 비선형적인 관계를 보이는 것을 밝혔다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.424-429
• /
• 1998

Numerical studies are performed to investigate the behavior of flat plates under combined in-plane and out-of-plane loads. The numerical model is verified by comparison with experiments for plates simply supported on four edges. Through study on different load combination and loading sequence, the critical load condition that governs the strength of the flat plate is determined. Parametric studies are performed to investigate the buckling coefficient and the effective flexural rigidity so that the moment magnification method is applicable to the flat plates.

• 한국방재학회 논문집
• /
• 제1권3호
• /
• pp.103-110
• /
• 2001

흙의 비선형 변형 특성과 말뚝의 강성을 동시에 고려한 즉, 말뚝과 지반의 상호 거동을 고려한 말뚝 기초 구조의 해석을 수행하였다. 특히 비균질, 비탄성 재료인 철근 콘크리트 말뚝의 단면응력과 균열 발생등의 원인으로 변화되는 말뚝의 휨강성을 구조해석에 적용하였다. 흙의 비선형 특성치는 토질 종류에 따라 흙의 탄성한계를 넘어 항복을 고려한 P-Y curve를 이용한 방법 및 N치에 의한 내부마찰각 산정에 따른 방법으로 얻었다. 본 연구 결과는 말뚝의 강성변화에 의해 교량상부구조의 변위 및 일부단면력이 커짐을 알 수 있었다. 따라서, 최적설계를 위한 정확한 구조해석에서 말뚝의 강성변화에 따른 적합한 구속조건을 고려할 필요가 있음을 알 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제31권4호
• /
• pp.275-279
• /
• 2010

The purpose of this study was to quantify the clinical assessment of rigidity at wrist in patients with Parkinson's disease. The experimental system was designed that the effect of gravity was negated by restricting motion at the horizontal plane and inertia was predetermined from a biomechanical measurement. Forty five patients with Parkinson's disease participated in this study. Viscoelastic properties were calculated from the experimental data acquired during intermittent passive movement of wrist. Viscoelastic constants correlated well with the rigidity scores of UPDRS, i.e., Spearman's r=0.733 and 0.905 for spring and damping constants, respectively. The results suggest that viscoelastic properties can be used as quantitative measures of rigidity.