• 제목/요약/키워드: In-line inspection

검색결과 534건 처리시간 0.029초

자기누설 비파괴 검사 시스템에서 축방향 미소결함 측정에 관한 연구 (A Study on the Measurement of Axial Cracks in the Magnetic Flux Leakage NDT System)

  • 김희민;박관수;노용우;유휘룡;조성호;김동규;구성자
    • 한국자기학회지
    • /
    • 제22권2호
    • /
    • pp.49-57
    • /
    • 2012
  • MFL PIG는 배관의 단면적이 변화할 때 발생하는 누설 자기장을 검출하고, 검출 된 누설 자속 신호의 분포 및 크기를 이용하여 배관 내 외벽에 결함의 발생 유무를 검사하는 방법이다. 기존의 MFL PIG는 금속 손실이나 균열, 부식과 같은 결함을 검출하는데 효과적이었으나 배관 내 외부의 압력차로 인하여 발생하는 가로축 방향의 가늘고 긴 미소결함을 검출하기 위하여 원주 방향으로 자기장 누설을 최대화 할 수 있는 CMFL(Circumferencial MFL) PIG의 개발이 필요하다. 본 논문에서는 자계 해석 기법 및 3차원 비선형 유한요소법을 이용하여 CMFL PIG를 설계하고 배관의 결함 유무에 따른 누설 자계 분포를 분석하였다. 또한 CMFL PIG와 함께 결함 검출 성능 검증을 위한 모의시험 배관과 결함 및 고정 구조물을 제작하고, 이를 이용한 실험으로 누설 자계 신호를 측정하여 결함의 형상변화가 검출 신호에 미치는 영향을 비교 및 검토하였다.

활하중 분포에 따른 콘크리트 부유식 컨테이너 터미널의 구조성능 및 거동 (Structural Performance and Behavior of Concrete Floating Container Terminal by Live Load Distributions)

  • 이두호;정연주;유영준
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제19권1호
    • /
    • pp.72-80
    • /
    • 2015
  • 본 연구에서는 총 10가지 다양한 컨테이너 활하중 분포에 따른 콘크리트 부유식 컨테이너 터미널 하부슬래브의 휨응력분포와 변위분포를 비교분석하였다. 또한, 대상구조물의 구조성능과 거동을 수치해석적으로 검토하였다. 활하중 분포에 따른 구조성능 검토결과 3가지 하중분포 (A, B, D-type)는 인장거동을 보이며, 그 외의 7가지 하중분포 (C, E, F, G, H, I, J-type)에서는 압축거동을 나타내었다. 특히, D, F-type에서는 과도한 압축응력이 발생하였으며, 부력 프리플랙션 제어를 통하여 압축응력을 저감할 수 있을 것으로 사료된다. 활하중 분포에 따른 구조거동 검토결과 B, E, F, I-type에 대한 부유구조체의 기울기가 메가플로트 기준을 초과하였으며, 이와 같은 하중분포는 컨테이너 적하 시에 회피해야 될 것으로 판단된다. 종합적으로, 부유식 컨테이너 터미널에 관련된 기준 및 연구가 많지 않은 현실을 감안할 때, 본 연구는 컨테이너 터미널의 구조성능 및 거동을 검토를 위한 초석이 될 것이며, 사용 가이드라인으로 활용이 가능할 것으로 판단된다.

다양한 경계조건에서 부분 분포 하중을 받는 이방성 사각평판 해석 (Analysis for A Partial Distribution Loaded Orthotropic Rectangular Plate with Various Boundary Condition)

  • 시상광
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제22권5호
    • /
    • pp.13-22
    • /
    • 2018
  • 이 연구는 이방성 평판의 휨 해석을 위한 지배방정식을 유도하고 다양한 경계조건을 갖는 평판의 정확한 풀이과정을 제시하였다. 이 해법은 삼각급수를 이용하여 미분 방정식을 대수학적 방정식으로 변환시키는 전통적인 Navier와 Levy의 방법을 따랐다. Levy의 방법을 이용해 해를 구하려면 평판의 마주보는 두 끝단이 단순지지단인 경우에만 가능하다. Navier의 방법은 사각평판의 네 끝단이 모두 단순지지단 이어야 한다. 본 연구는 Navier와 Levy해법이 갖는 경계조건 한계를 극복하였다. 이 해법은 평판 네 끝단의 경계조건이 단순지지단과 고정단의 어떤 조합이라도 적용될 수 있다. 하중조건도 분포하중, 부분하중 그리고 선하중에 대해 적용할 수 있다. 이 해법의 장점은 Navier와 Levy해법이 갖는 경계조건 한계를 극복하였을 뿐만 아니라 정확한 해를 구할 수 있다. 비대칭 경계조건을 갖는 이방성평판에 대하여 이 해법을 이용한 계산결과를 나타냈다. 또한 Navier해법과 Levy해법 그리고 Szilard의 계산결과와 비교를 보여주었는데 계산된 처짐량이 잘 일치한다.

강합성 콘크리트 박스구조물(트랜스퍼 거더)의 건조수축 균열에 대한 연구 (A Study on Shrinkage Crack of Steel Composite Concrete Box Structure (Transfer Girder))

  • 최정열;김대일
    • 문화기술의 융합
    • /
    • 제8권6호
    • /
    • pp.685-691
    • /
    • 2022
  • 본 연구의 대상구조물은 지하철 본선 직상부에 시공된 초고층 빌딩 하중을 지지하기 위해 설치한 전이구조체인 강합성 콘크리트 박스구조물(트랜스퍼 거더)로서 연구의 목적은 대상구조물에 발생된 균열의 원인을 분석하는 것이다. 본 연구에서는 강합성 콘크리트 구조물에 발생된 균열조사결과와 수치해석결과를 비교, 분석하여 강합성 콘크리트 구조물에 발생된 균열의 원인이 건조수축균열임을 해석적으로 입증하였다. 연구결과, 콘크리트 내부에 매립된 철골의 형상 및 수직보강재의 위치와 폐합 단면의 면적에 따라 외기온도에 따른 콘크리트와 강재간의 내부 온도차가 발생하는 것으로 나타났다. 수직보강재의 간격이 좁은 경우 넓은 단면에 비해 상대적으로 내부 온도의 집중도가 상승하여 외기와의 온도차가 크게 발생되는 것으로 나타났다. 또한 온도 및 온도에 따른 변형율이 크게 발생되는 위치와 현장균열조사 결과와 일치하는 것으로 분석되었다. 따라서 구조물 중앙부의 점검통로와 철골에 형성된 수직보강재 유무 및 간격에 따라 내부 온도 집중부가 형성되고 해당위치에서 강재에 의한 콘크리트의 온도신축거동이 구속되어 건조수축균열이 발생될 수 있는 것으로 분석되었다. 본 연구결과를 바탕으로 향후 강합성 콘크리트 구조물에 대한 유지관리 및 점검 시 건조수축에 의한 비구조적인 균열과 구조적인 균열을 구분하여 관리하는 것이 중요할 것으로 판단된다.

압전센서를 사용한 배관 구조물의 실시간 건전성 평가 (Real-time Health Monitoring of Pipeline Structures Using Piezoelectric Sensors)

  • 김주원;이창길;박승희
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제14권6호
    • /
    • pp.171-178
    • /
    • 2010
  • 가스관, 송유관 등의 배관구조물은 주요자원의 수송을 책임지는 핵심 지하시설물 중 하나이다. 이들은 사고 및 자연적인 노후화로 인해 국부적인 손상이 발생할 위험에 노출 되어있다. 하지만 대부분의 배관구조물은 지하의 좁은 공간에 복잡하게 연결되어있기 때문에 구조물의 건전성을 지속적으로 모니터링 하는데 어려움이 있었다. 이러한 지금까지 관리방식의 한계점을 극복하기 위해 최근 유비쿼터스 센서 네트워크 기반의 온라인 방식의 상시적 구조물 건전성 평가방법에 대한 연구가 활발히 이뤄지고 있다. 본 논문에서는 전기-역학적 임피던스 기반의 실시간 배관 구조물 건전성 평가방법에 대하여 연구하였다. 배관 구조물에 발생하기 쉬운 볼트 풀림과 균열의 두 가지 국부손상을 가정하였고 압전효과를 가진 PZT와 MFC 센서를 이용하여 구조물의 상태에 따른 임피던스를 계측하여 손상탐색 실험을 수행하였다. 하나의 센서로 가진과 센싱을 동시에 수행할 수 있는 저비용 셀프센싱 기법을 사용하였고 배관 상태에 대한 객관적인 판단을 위해 손상지수인 RMSD 값을 사용하여 계측된 신호를 이용하여 손상의 정도를 정량화 시켰다. 손상여부의 판단을 위해 일반 극치 분포를 이용하여 최적화된 통계적인 정상상태의 임계값을 설정하였다. 위와 같은 실험적 연구과정을 통해 제안된 실시간 배관 구조물 건전성 평가 방법의 타당성과 효율성을 확인해 보았다.

($14{\sim}15$세 한국인 안모의 실물사진계측분석에 의한 연구 (A PHOTOMETRIC STUDY OF MAXILLOFACIAL NORMALS IN $14{\sim}15$ YEAR-OLD KOREAN.)

  • 오재권;김여갑
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제23권2호
    • /
    • pp.115-123
    • /
    • 2001
  • The primary method of diagnosis in craniofacial deformity patient is used by gross inspection. The study for objective analysis and evaluation in Korean maxillofacial soft tissue portions is rare and our normals have been based on Caucasian such as American. But it is difficult to apply it to ours so we studied the frontal photometric measurements for maxillofacial Korean normals. The photograph were taken with the subject sitting in head position parallel with interpupillary plane to the floor. During taking pictures, facial analyser by Obwegeser in Martin was used for correct measurements. 54 male and 57 female ages 14 to 15 years were selected from a group of 111 healthy middle school students in Inchon. 1. The vertical measurements in glabella-subnasale, subnasale-stomion and stomion-menton in the male were higher than in the female subjects in $14{\sim}15$ years old Korean, so middle and lower third face were higher than those of female(p<0.05). 2. The horizontal measurements of female was higher than those of male in the rt. and It. eye width but smaller in nose width and lip width(p<0.05). 3. There was no significant difference in gender compared with soft cheek and mention angle measurements When our reports were compared with american white population, the vertical proportions in Korean normals were similar to american and the line measurements in middle facial length, nose width and intercanthal distance were higher than those of american.

  • PDF

고등어 및 망치고등어육의 부위별 생화학적 특성 비교 (A Comparison of the Biochemical Characteristics of Different Anatomical Regions of Chub (Scomber japonicus) and Blue Mackerel (Scomber australasicus) Muscles)

  • 배진한;윤성호;임선영
    • 한국수산과학회지
    • /
    • 제43권1호
    • /
    • pp.6-11
    • /
    • 2010
  • Chub and blue mackerels are popular fish resources in Korea, but little is known about each biochemical characters of different anatomical regions. To investigate biochemical characters of chub and blue mackerels, three ordinary muscle regions were identified by their fin position; namely anterior, median, posterior. In addition, red muscle, as a dark muscle, was obtained from beneath the lateral line to compare with ordinary muscles. Proximate and lipid-class compositions did not show any discernible trends in the different anatomical ordinary muscles from mackerel of the same kind, while significant differences between ordinary and red muscles in the same mackerel, or between chub and blue mackerels, were observed. Red muscles from both mackerels had higher levels in lipids with higher neutral lipid class compared with ordinary muscles. The major difference between chub and blue mackerels was the levels of lipids and neural lipid class, indicating that all muscles from chub mackerel showed higher levels of neural lipids compared with those of blue mackerel (P<0.05). Fatty acid compositions showed that the percentage of polyunsaturated fatty acids (PUFA), especially docosahexaenoic acid (DHA, 22:6n-3), in median and posterior was higher compared with anterior muscle from both mackerels. When compared with chub mackerel, blue mackerel showed higher percentage of DHA in all muscle regions. In amino acid analysis, taurine concentration was much higher in the red muscle than in the ordinary muscles. But levels of histamine, glutamic acid, leucine and lysine were higher in the ordinary muscles. Our results indicated that chub mackerel contained more lipids than blue mackerel and that red muscle had higher levels of neural lipid and taurine compared to ordinary muscles.

Macroscopic, Histological, and Microbiological Characterization of Contact Lesions at the Tibiotarsal Region of Broilers

  • Cavani, Ricardo;Rubio, Marcela da Silva;Alves, Khauston Augusto Pereira;Pizauro, Lucas Jose Luduverio;Cardozo, Marita Vedovelli;Silva, Paulo Lourenco;Silva, Iran Jose Oliveira;Avila, Fernando Antonio
    • 한국축산식품학회지
    • /
    • 제42권2호
    • /
    • pp.313-320
    • /
    • 2022
  • Brazil is considered as a great broiler feet exporter, especially for the Chinese trade. Contact lesions at the tibiotarsal region are responsible for economic losses and there is no model for its classification, thereby this study presents a fast and practical grade system to be used in the poultry industry and proposes these lesion characterizations into three different grades. For this, correlation was made between macroscopic, histological findings and microbiological quantification (Escherichia coli, Staphylococcus spp., Streptococcus spp. and sulphite-reducing clostridia) from contact lesions in the tibiotarsal region of 112 broiler carcasses, divided in four groups (n=28), accordingly to the lesion's intensity. There were no significant differences in microbiological quantification among the groups (p>0.05) except for the grade 3 group, as grade 1 and 2 lesions were in the early stages and histopathological changes such as ulceration were not observed. In grade 3 lesion group, it was observed bacterial cocci grume and ulceration at the articular region and significantly higher microbiological count (p<0.05) for E. coli and Staphylococcus spp. In conclusion, the visual standard proposed in this work, correlated and confirmed by the histopathologic, and microbiologic characterization, allows to precise and fast ascertainment of the contact lesion grade in the tibiotarsal regions of broiler carcasses. Moreover, it should be highlighted that grades 1 and 2 alterations are not caused by an inflammatory process caused by pathogenic agents and should not be considered a public health risk.

유과의 품질규격 유지를 위한 외형 정보 측정 시스템 설계 및 적용 연구 (System Design and Application of External Feature Extraction for Quality Maintenance of Yukwa)

  • 조성호;김태정;황헌
    • 한국지역사회생활과학회지
    • /
    • 제24권2호
    • /
    • pp.251-258
    • /
    • 2013
  • Korean oil and honey Yukwa has been paid attention as formal cake for traditional national seasons' holiday and religious service. Quality of Yukwa, however, has been maintained arbitrarily by each Yukwa manufacturer. Since even same Yukwa had severe differences in size, weight, and pattern, it has given the negative effect to the consumer. Yukwa industries need to setup the quantitative quality specifications instead of qualitative ones to maintain the uniformity of Yukwa quality. Efficient and economical inspection and process control system should be developed. In developing quality standards of Yukwa, features which can measure quality quantitatively in real time should be properly chosen. Existing quality features such as acidity, oxidization, hardness, viscosity, and texture were measured by the chemical or physical base destructive methods. Many research and developments have been performed in investigating and analyzing chemical transition states of those quality features as environment or storage condition changes. Most methods, however, require either off-line or complex treatment or time consuming process of analysis in evaluating quality features. Consumer, however, selects products mostly based on the external features such as shape, size, and color. Therefore, critical visual quality features should be chosen and the efficient real time measurement system must be developed. In this paper, computer image acquisition and processing system were developed and software modules were developed to extract the quantitative data of those features in real-time. Computer image processing system will promote in maintaining uniform quality of Yukwa and establishing quality standards of Yukwa.

얼굴스캐너를 활용한 안면형상 영상진단기의 기초 연구 (Basic Study on the Image Instrument of the Facial-form by the 3D-facial Scanner)

  • 김경철;이정원;김훈;신순식;이해웅;이용태;지규용;김종원
    • 동의생리병리학회지
    • /
    • 제22권2호
    • /
    • pp.497-501
    • /
    • 2008
  • 3D facial scanner for an accurate analysis is measured precisely a distance in straight, a distance in curved line, an angle in 3D data, the area of surface. We can easy acquire 3D data by the method of 0.8sec in each scan with easy handling, simple merge to whole face, harmless and fast process. In the HyungSang medicine, the inspection of the facial shape includes the Dam(gall bladder) - Bang Kwang(urinary bladder) body, the Jung${\cdot}$Gi${\cdot}$Shin${\cdot}$Hyul, the six merdian types etc. And we will collect the evidence based date verifing in the HyungSang clinical medicine. As we will analyze the facial whole form and the size${\cdot}$length${\cdot}$angle of the facial part, put the facial form's standardization on a solid foundation.