• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.425-428
• /
• 2008

교량 바닥판은 공용기간 동안 차량하중 및 외부 열화환경(동결융해, 우수, 융빙제)에 직접적으로 노출되어 있어 교량의 주요 부재 중 가장 많은 결함이 발생되는 부위이다. 따라서, 콘크리트 교량 바닥판의 열화원인을 분석하고 향후 손상방지 및 품질향상 대책을 수립하고자, 고속도로 상에 공용 중인 교량 바닥판 중 19개소에 대해 콘크리트 코어를 채취하고, 콘크리트에 대한 공극특성 분석을 실시하였다. 실험결과, 손상이 발생된 교량 바닥판의 경우, 공기량이 기준치에 미달하거나, 기준치를 만족하는 경우에도 기포간격계수가 외국의 기준에 미치지 못하여 내구성이 저하된 것으로 나타났다.

• 제어로봇시스템학회논문지
• /
• 제14권6호
• /
• pp.519-522
• /
• 2008

As industry of a semiconductor and LCD industry have been rapidly growing, precision technologies of machining such as etching and 3D measurement are required. Stylus has been important measuring method in traditional manufacturing process. However, its disadvantages are low measuring speed and damage possibility at contacting point. To overcome mentioned disadvantage, non-contacting measurement method is needed such as PMP(Phase Measuring Profilometry), WSI(white scanning interferometer) and Confocal Profilometry. Among above 3 well-known methods, WSI started to be applied to FPD(flat panel display) manufacturing process. Even though it overcomes 21t ambiguity of PMP method and can measure objects which has specular surface, the measuring speed and vibration coming from manufacturing machine are one of main issue to apply full automatic total inspection. In this study, We develop high speed WSI system and algorithm to reduce unknown noise. The developing WSI and algorithm are implemented to measure 3D surface of wafer. Experimental results revealed that the proposed system and algorithm are able to measure 3D surface profile of wafer with a good precision and high speed.

• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.151-155
• /
• 2008

KHST(Korean High Speed Train) has been utilized the total measurement system which evaluates the efficiency and a breakdown of the vehicle and it's results effect to secure reliability of the vehicle. Generally KHST has been received pulse signals from the wheel. It calculates the travel distance after counter the signals to confirm location information of the vehicle. However, there is a limit to measure the location of the vehicle due to slip, slide and the wheel attrition. We have developed a new measurement system by using GPS to complement those errors. In general, GPS receivers are composed of an antenna, tuned to the frequencies transmitted by the satellites, receiver-processors, and a highly-stable clock The GPS mounted on the roof of TT4 in KHST receives a signal from the RS232 communication port. It is connected to the network system in TT3 after converting with TCPIP communication. It is able to track the position of vehicle and synchronize the signal from different measurement system simultaneously. Therefore it is able to chase the fault occurrence, track inspection and electrical interruption at real-time situation more accurately. There is not an error coursed by vehicle conditions such as slip and the slide.

• 한국병원경영학회지
• /
• 제16권1호
• /
• pp.77-100
• /
• 2011

The purpose of this study is to the improvement of general hospital outpatients waiting time using Theory Of Constraints(TOC) methodology and to the development of a Reception Desk in general hospital. This study is to provide decision-making guidelines for hospital managers and to provide feedback for the efficiency of job process. The target people of the study are outpatients and Cashiers on Chungnam national university hospital in Daejeon. The methods of study are summarized as follows. First, The team managers from a Reception Desk group were appointed. This team managers have the adjustment authority to the Outpatients schedule of doctor and Cashier members. Second, The consolidation of the general Reception desk and special inspection the Reception Desk. A movement line and waiting time of patients were simple and fast to accept. As a result of study, it shows that the TOC is the method for a job process and waiting time improvement, patients' satisfaction increase and we need an objective measurement indexes in the medical treatment industry.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.2947-2949
• /
• 1999

The MX-13 digital multiplexer for leased line is one of the main facilities, so it is periodically monitored by the operator. Operators connect dummy terminal to the MX-13 digital multiplexer manually, and execute preventing inspection. When alarms occurred, they are manually checked by the operator. But, in order to get mere efficiency of accident prevention and monitoring facilities with rapid response to the accident symptom, and to get higher reliability from the companies who lease communication lines, we need to construct this system which is adequate to monitor IvlX-13 digital multiplexer in almost real time. We construct remote monitoring system for MX-13 digital multiplxer to meet those requirement. After constructing the system, it's possible that the local operator can manage local monitoring system to check the status of MX-13 digital multiplexers. Also, Center operator can monitor the facility which has problems, and located in the specific local areas with the use of Center monitoring system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1626-1628
• /
• 2003

The lightning arrester is a very important overvoltage protection device in the electric power system. Therefore, the inspection of lightning arrester whether it keeps its performance or not properly has close related to verifying the safety confidence of the electric power system. But the development of the deterioration measuring method and on-line detecting system, is necessary to monitor the deterioration of the lightening arrestor. In this paper, we developed the lightning arrester degradation monitoring system. This system detected leakage current of lightning arrester by using the ZCT, and analyze the third harmonics ingredient of leakage current using DFT method in the Data Acquisition Unit(DAU). The analyzed current signal is transmit to the Human-Machine Interface(HMI), and HMI alarmed when accident are occurred and informed with the amplitude of leakage current to the operator.

• 한국지진공학회논문집
• /
• 제22권3호
• /
• pp.193-199
• /
• 2018

This study aims to create a disaster management system after an earthquake. Japan's earthquake disaster management system, including the Disaster Countermeasures Basic Act, addresses all of the disaster phases of prevention, mitigation, preparedness and emergency response as well as recovery and reconstruction with roles and responsibilities among the national and local governments clearly defined. Korea's earthquake disaster management system are including the Disaster Countermeasures Basic, but when the 9.12 earthquake occurred, problems such as insufficient early response, study on the earthquake lack were revealed. This study conducted a field survey and analyzed coping process after Po Hang earthquake. Therefore, this study have found that Disaster Management Headquarters are operated rapidly. They are coped with urgent safety inspection for damage facilities and soil liquefaction with advanced equipment. And The headquarters interviewed with victims. So they found out What the victims needed. However, when carrying out relief activities, Research of temporary housing and allocation of donations was not rapid. Further, this study have found that earthquake specialists were lack and disaster information transfer was not working. This study will be utilized as fundamental data in planning disaster management system after an earthquake.

• 인지과학
• /
• 제11권1호
• /
• pp.33-45
• /
• 2000

본 연구는 정보 시스템으로서의 웹(WWW)의 인지심리학적 특성들을 고려하여 웹사이트의 사용성에 관련된 디자인 특성들을 밝히고자 하였다. 구체적으로 다양한 목적의 웹사이트를 선정하고 다양한 비실험적 방법들을 이용하여 그 사이트의 홈페이지 디자인에 관한 사용성 평가를 실시하였다. 이를 위해 연구 1에서는 설문조사법을 통한 웹사이트의 사용성을 조사하였다. 그 결과, 몇 가지 중요한 사용성과 관련된 디자인의 특성들 및 요인들이 추출되었다. 연구 2에서는 연구 1에서 쉽게 발견되지 않은 특정 웹사이트의 세부적 사용성 문제들을 검출하기 위해 발견적 평가를 실시하였다. 연구 2의 결과, 발견적 평가가 연구 1 의 설문조사에 비해 디자인의 세부적인 문제점들을 더 잘 드러내는 것으로 나타났다.

• 한국환경과학회지
• /
• 제25권4호
• /
• pp.525-534
• /
• 2016

The biological wastewater treatment plant, which uses microbial community to remove organic matter and nutrients in wastewater, is known as its nonlinear behavior and uncertainty to operate. Therefore, operation of the biological wastewater treatment process much depends on observation and knowledge of operators. The manual inspection of human operators is essential to manage the process properly, however, it is impossible to detect a fault promptly so that the process can be exposed to improper condition not securing safe effluent quality. Among various process faults, equipment malfunction is critical to maintain normal operational state. To detect equipment faults automatically, the dynamic time warping was tested using on-line oxidation-reduction potential (ORP) and dissolved oxygen (DO) profiles in a sequencing batch reactor (SBR), which is a type of wastewater treatment process. After one cycle profiles of ORP and DO were measured and stored, they were warped to the template profiles which were prepared already and the distance result, accumulated distance (D) values were calculated. If the D values were increased significantly, some kinds of faults could be detected and an alarm could be sent to the operator. By this way, it seems to be possible to make an early detecting of process faults.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.149-156
• /
• 2003

Recently, the importance of plant maintenance(PM) was highly raised to provide efficient plant operation which highly affects the productivity. For this reason, a number of engineering methodologies, such as riskbased inspection(RBI), fitness for service guidelines(FFS), plant lifecycle management(PLM), have been applied to improve the plant operation efficiency. Also, a network-based business operation system, which is called ERP(Enterprise Resource Planning), has been introduced in the field of plant maintenance. However, there was no attempt to connect engineering methodologies to the ERP PM system. In this paper, a knowledge-based information system for the plant operation of steel making company has been proposed. This system, which is named as K-VRS(Knowledge-based Virtual Reality System), provides a connection between ERP plant maintenance module and knowledge-based engineering methodologies, and thus, enables network-based highly effective plant maintenance process. The developed system is expected to play a great role for more efficient and safer plant maintenance.