• Steel and Composite Structures
• /
• 제44권5호
• /
• pp.721-740
• /
• 2022

In this paper, an accurate kinematic model has been developed to study the mechanical response of functionally graded (FG) sandwich beams, mainly covering the bending, buckling and free vibration problems. The studied structure with homogeneous hardcore and softcore is considered to be simply supported in the edges. The present model uses a new refined shear deformation beam theory (RSDBT) in which the displacement field is improved over the other existing high-order shear deformation beam theories (HSDBTs). The present model provides good accuracy and considers a nonlinear transverse shear deformation shape function, since it is constructed with only two unknown variables as the Euler-Bernoulli beam theory but complies with the shear stress-free boundary conditions on the upper and lower surfaces of the beam without employing shear correction factors. The sandwich beams are composed of two FG skins and a homogeneous core wherein the material properties of the skins are assumed to vary gradually and continuously in the thickness direction according to the power-law distribution of volume fraction of the constituents. The governing equations are drawn by implementing Hamilton's principle and solved by means of the Navier's technique. Numerical computations in the non-dimensional terms of transverse displacement, stresses, critical buckling load and natural frequencies obtained by using the proposed model are compared with those predicted by other beam theories to confirm the performance of the proposed theory and to verify the accuracy of the kinematic model.

• Geotechnical Engineering
• /
• 제12권6호
• /
• pp.65-78
• /
• 1996

The Chungpyung Dam is a 16 yearn old rock-fill dam for a Pumped storage hydro-Power plant, located in the middle of the Korean Peninsula. Since the dam is subjected to the daily water level fluctuation, such as rapid drawdown and refill, thus inducing a structural impact on the behavior of dam body, it draws attention of many engineering concerns. Traditionally, steady-state analysis was employed to investigate the seepage in the dam body, but in this study the seepage analysis was numerically performed by 2-D FEM thansient analysis. As a boundary condition for an analysis, the water level fluctuation was incorporated to simulate the daily change. As a res41t, the various seepage phenomena such as hydraulic gradient, seepage vector, and pore water pressure distribution were quantified at the corresponding time of interest as the water level rises and recedes. The seepage flux was also estimated and compared with the measured data which were both acceptable considering design criteria. The result proves that there is no sign of hazardous sources contributing to the possibility of piping, internal erosion and excess leakage through the dam body.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제17권2호
• /
• pp.39-44
• /
• 2017

In this study, we compared the perception of absolute purchase of equipment for broadcasting equipment purchasing demand according to the rapid change of domestic content production and distribution method, and the degree of information such as technical reliability and system stability of domestic broadcasting equipment perceived by consumer The effects were analyzed through a research model. Due to the lack of existing research data on broadcasting equipment demand, we conducted in depth interviews with surveys of broadcasting equipment and surveys. As a result of analysis, compared to foreign equipments, there are many cases of purchase of domestic equipments, systems, and block purchases. To improve the preference and satisfaction of Korean broadcasting equipment, which is recognized by domestic demand for broadcasting equipment, it is urgent to improve the technical reliability and to develop core key equipment and to expand the demand of domestic equipment limited to small power transmitter antenna and monitor equipment. It is urgent to develop in order to develop overseas and to support the domestic market to secure the domestic market.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.723-725
• /
• 2003

The result of design and Partial fabrication of a 1 MVA single phase high temperature superconducting(HTS) transformer for power distributions are presented in this paper. The HTS windings are wound as double pancake windings which have advantages of uniform distribution of high voltage over the windings. the rated primary and secondary voltages are 22.9 kV and 6.6 kV respectively. Four HTS tapes are wound in parallel for secondary windings considering the rated currents of the transformer. The HTS windings will be cooled down to 65 K by natural convection of sub-cooled liquid nitrogen using a single-staged GM-cryocooler in order to make the stability of the HTS windings better. The iron core is designed as shell type and isolated from the liquid nitrogen by an FRP cryostat which have a room temperature bore. After the complete fabrication of the total HTS transformer system, performance test of the transformer will be carried out.

• Advances in nano research
• /
• 제12권1호
• /
• pp.81-99
• /
• 2022

The aim of current work is to evaluate thermo-electrical characteristics of graphene nanoplatelets Reinforced Composite (GNPRC) coupled with magneto-electro-elastic (MEE) face sheet. In this regard, a cylindrical smart nanocomposite made of GNPRC with an external MEE layer is considered. The bonding between the layers are assumed to be perfect. Because of the layer nature of the structure, the material characteristics of the whole structure is regarded as graded. Both mechanical and thermal boundary conditions are applied to this structure. The main objective of this work is to determine critical temperature and critical voltage as a function of thermal condition, support type, GNP weight fraction, and MEE thickness. The governing equation of the multilayer nanocomposites cylindrical shell is derived. The generalized differential quadrature method (GDQM) is employed to numerically solve the differential equations. This method is integrated with Deep Learning Network (DNN) with ADADELTA optimizer to determine the critical conditions of the current sandwich structure. This the first time that effects of several conditions including surrounding temperature, MEE layer thickness, and pattern of the layers of the GNPRC is investigated on two main parameters critical temperature and critical voltage of the nanostructure. Furthermore, Maxwell equation is derived for modeling of the MEE. The outcome reveals that MEE layer, temperature change, GNP weight function, and GNP distribution patterns GNP weight function have significant influence on the critical temperature and voltage of cylindrical shell made from GNP nanocomposites core with MEE face sheet on outer of the shell.

• Computers and Concrete
• /
• 제25권4호
• /
• pp.311-325
• /
• 2020

In this research work, the hygrothermal and mechanical buckling responses of simply supported FG sandwich plate seated on Winkler-Pasternak elastic foundation are investigated using a novel shear deformation theory. The current model take into consideration the shear deformation effects and ensures the zero shear stresses on the free surfaces of the FG-sandwich plate without requiring the correction factors "Ks". The material properties of the faces sheets of the FG-sandwich plate are assumed varies as power law function "P-FGM" and the core is isotropic (purely ceramic). From the virtual work principle, the stability equations are deduced and resolved via Navier model. The hygrothermal effects are considered varies as a nonlinear, linear and uniform distribution across the thickness of the FG-sandwich plate. To check and confirm the accuracy of the current model, a several comparison has been made with other models found in the literature. The effects the temperature, moisture concentration, parameters of elastic foundation, side-to-thickness ratio, aspect ratio and the inhomogeneity parameter on the critical buckling of FG sandwich plates are also investigated.

• Journal of Distribution Science
• /
• 제11권12호
• /
• pp.25-37
• /
• 2013

Purpose - The structure of retailing has changed as retailers develop markets in response to business environment changes. This study aims to analyze the general situation of retailers in order to predict future global strategy using case studies of overseas expansion strategy and the Metro Group's global strategy. Research design, data, and methodology - The backgrounds to the new retail business model and retailer classification are analyzed as theoretical data. In addition, the key success point of the Metro Group's "cash and carry" strategy is analyzed as is the Metro Group's global CFAR (collaborative planning, forecasting, and replenishment) strategy. Finally, the plan for cooperation and precise forecasting under the Metro Group's supply chain management are analyzed from the promotion environment viewpoint. Related materials analyzed included the 2012 annual report, the Metro Group's web page, and a video interview with the executive in charge of global strategy and the new market development department. Some data were revised to avoid disrupting essential aspects of the case studies. Results - The important finding was that the Metro Group could be a world-class retail company with its successful global expansion strategy. The Metro Group's global strategy's primary goal is to have a leading business position in Eastern and Western Europe. The "cash and carry" strategy is highest priority in its overseas expansion strategy. Moreover, the Metro Group has standardized product planning capacity, which could be applied in various countries with different structural and cultural backgrounds. This is the main reason that the Metro Group could rapidly become successful in the Eastern Europe and Asian markets through its structural overseas expansion strategies. In addition, the Metro Group emphasizes the importance of supply chain management. Conclusions - First, retailers should create additional value through utilizing the domestic market, market power, and economies of scale to launch a global strategy to maximize benefits from diversification. Second, the political, economic, and cultural background of the target country needs to be understood to successfully implement the overseas expansion strategy. Third, the main factor of successful cooperation with a local partner is how quickly the company gains total understanding of the business resources and core competence of its partner. All organizations should focus on the achievement of goals in order to successfully operate the partnership. Fourth, retailers should improve their business, financial and organizational structure. Moreover, the work processes and company culture should also be improved to respond strongly in the competitive global market. Fifth, the essential point of a successful retail business is the control capacity of its branding and format. The retailer could avoid forecasting errors through supply chain management by perfectly distributing the actual amount of its inventory. In addition, the risks along the supply chain are effectively shared between the supply chain partners. Finally, the central tendency of the market is to gain in strength with this taking place across all parts of the business.

• The Journal of the Korea Contents Association
• /
• 제14권9호
• /
• pp.529-537
• /
• 2014

To establish a foundation to objectively interpret Chosun history, we construct people network of the Chosun dynasty. The network shows scale free network properties as if most social networks do. The people network is composed of 1,379 nodes and 3,874 links and its diameter is 14. To analysis of the network dynamics, whole network that is composed of 27 king networks were constructed by adding the first king, Taejo network to the second king, Jeongjong network and then continuously adding the next king networks. Interestingly, betweenness and closeness centralities were gradually decreased but stress centrality was drastically increased. These results indicate that information flow is gradually slowing and hub node position is more centrally oriented as growing the network. To elucidate key persons from the network, k-core and MCODE algorithms that can extract core or module structures from whole network were employed. It is a possible to obtain new insight and hidden information by analyzing network dynamics. Due to lack of the dynamic interacting data, there is a limit for network dynamic research. In spite of using concise data, this research provides us a possibility that annals of the Chosun dynasty are very useful historical data for analyzing network dynamics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제18권2호
• /
• pp.324-334
• /
• 2017

The simulators for a plant unit master control (UMC) developed by domestic or overseas researchers have been developed for operator-training purposes. UMC simulators normally constructed at the end of the plant construction, despite the UMC logics, should be simulated to pre-check many signal interfaces within the power generation systems. Because of the differences in construction schedule, it is difficult for logic designers or commissioning engineers to simulate the UMC logic during the design or commissioning stage. In this background, this paper proposes a simulation method that can be used easily by plant logic designers or operators in the MATLAB Simulink programming environment. The core of the UMC is realized with a unique simulation algorithm based on mathematical analysis and functional blocks combination. In addition, an integer-based configuration was proposed to realize the plant target value control for the equipment in the logic. With these simulation methods, functions, e.g., load distribution, high-low limitations, frequency compensation, etc. were simulated. The results showed that the plant UMC logic can be simulated in Simulink without a plant simulator. The various functions proposed in this paper can provide useful information about Simulink-based simulation design for plant logic designers or commissioning engineers during the power plant construction period.

• Journal of the Korean Society for Marine Environment & Energy
• /
• 제15권1호
• /
• pp.9-18
• /
• 2012

Annual power consumption of our country is positioned in the upper percentile in the world, and because the proportion of fossil power generation is high, which ranks the 10th $CO_2$ emission country. In this regard, government has established and is implementing the National Energy Basic Plan to realize to get out of fossilization in energy supply while focusing on securing the technology for renewable energy as well as its commercialization in order to reduce greenhouse gas. Resource recovery technology for deep seawater thermal energy which is one of renewable energies is newly getting attention domestically as well as in overseas for securing resources and environmental improvement as a core technology for multilateral use of marine resources for low carbon and green growth. Economic feasibility analysis was conducted for the research and development as follows on the use of ocean thermal energy conversion and seawater air conditioning. First, in the case of power generation using deep seawater and warm discharge water from ocean thermal energy conversion plant of 1MW level, it is judged that the economic feasibility is insufficient but the feasibility will be significantly improved if we consider not only power generation but also drinking water and certified emission reduction by developing the power plant to the size for commercialization. Second, the economic feasibility for the use of deep seawater as air conditioning for the power plant of 1,000RT level turned out to be very good. Especially, when we consider certified emission reduction, it will be possible to secure sufficient economic feasibility. When we use it in connection with ocean thermal energy conversion, water conversion and agricultural and fishery use, it is judged that economic ripple effect will be significant and therefore it will be necessary to conduct research and development for early commercialization, distribution and diffusion of deep seawater energy.