• 한국가구학회지
• /
• 제11권2호
• /
• pp.67-72
• /
• 2000

Some physical characteristics as thickness swelling, heat conduction, and bending properties of composite hoards made of waste wood chip and charcoal were measured. Wood-charcoal composite boards of three types and cement board were prepared for this study as shown in Table 1, Keeping duration of strawberries in the boxes($25cm{\times}25cm{\times}25cm$) manufactured with the boards was also examined. Thickness swelling and bending properties(MOR and MOE) of board B and C were lower than those of board A. Among the wood-charcoal composite boards except cement board, there were no differences in heat conduction(mm/sec.). Strawberries in the box with board C were kept longer duration in fresh condition than that with cement board. From the results, it is suggested that wood-charcoal composite boards can be used for eco-material.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.453-455
• /
• 1993

In this research, the digital signal processing PC board which employs TI's TMS320C25 is implemented. The board can perform following functions. spectrum analysis of speech and repetitive signal, digital filters emulation by convolution, signal generation of sinusoidal wave, rectangular wave etc.. In this system, communications between PC and DSP board. program down-loading to DSP board and recording and graphic of acquired and processed data in DSP board are executed by PC. Parallel interface and buffer memory are used in communications. Data acquisition and operation are carried out in DSP board. Resultant data are transmitted to PC and output through DAC.

• 한국응급구조학회지
• /
• 제12권3호
• /
• pp.27-41
• /
• 2008

Purpose : The purpose of this study was to supply basic data for the impact on the accuracy of basic CPR according to position and foot-board height of basic CPR provider. Methods : Study design was within - group design. Subjects were 25 EMT-P Students in K city. Interventions was basic CPR performed on a resuscitation manikin placed on a hospital bed, kneeling on the bed adjacent to the manikin. Data was analyzed using descriptive statistics and Friedman test. Results : In case of the basic CPR performed on a resuscitation manikin placed on a hospital bed, ventilation accuracy was the highest in less than 160 cm height, foot-board height : $34.2{\pm}1.48cm$, 91.4% and in 161-165 cm height, foot-board height : $26.0{\pm}2.14cm$, 88.4% and in 171-175 cm height, foot-board height : $23.0{\pm}1.41cm$, 91.3% and in the above 176 cm, kneeling on the bed, 95%. Chest compression accuracy was the highest in less than 160 cm height, foot-board height : $30.2{\pm}1.48cm$, 95.6% and in 161-165 cm height, kneeling on the bed, 97.6% and in 171-175 cm height, kneeling on the bed, 98.5% and in the above 176 cm, kneeling on the bed, 98.7% and foot-board height : $20.5{\pm}1.91cm$, 98.7%. Chest compression error was due to too weak : 2.0-35.4 times. There were ststistically significant differences in 191-195 cm group according to chest compression mean depths($x^2=10.824$, p = .013) and chest compression error (p = .040). Conclusion : In contrast to current guidelines, the position and foot-board height of basic CPR provider are very important to the accuracy of the basic CPR. Furthermore, we recommend that a using real time audiovisual feedaback system significantly improve the quality of chest compression and ventilation during resuscitation.

• 한국환경복원기술학회지
• /
• 제9권1호
• /
• pp.1-13
• /
• 2006

The recent environmental protection issue has diminished the supply of sand for soft ground improvements so much that the prices of sand have shown a sudden rise. Plastic material is one of substitutes for sand material, but plastic is nonperishable and doubtable if it has potential environmental hormone disrupting substances. Moderate-priced natural fiber drain board made with coconut coir and jute filter are in the spotlight recently as an alternative material for sand and plastic drain board etc. Natural fiber drain has not only competitive price but also a characteristic of assimilation into the soils after finishing of its own function. Discharge capacity of the fiber drain board evaluated by triaxial type discharge capacity test was relatively lower than that of plastic drain board. Nevertheless, settlement and pore pressure dissipation behaviors of the fiber drain board and the plastic drain board which were installed in the clayey soil during the composite discharge capacity test were almost similar. It was also found that biodegradation of the fiber drain board was in progress until 18 month after installation in the clayey soil, but they had still enough engineering properties to use at field.

• 수산해양기술연구
• /
• 제51권1호
• /
• pp.26-34
• /
• 2015

The angle of attack of a cambered otter board in a bottom trawl was estimated using a three-dimensional semi-analytic treatment of a towing cable (warp) system that was applied to the field experiments of a bottom trawl obtained by the Scanmar system. The equilibrium condition of the horizontal component and vertical component of forces was used to the three forces acting on the otter board in the horizontal plane. Those forces were the force on the warp at the bracket, hydrodynamic lift and drag forces on the otter board and the force on the hand rope attached just behind the otter board. Also the equilibrium of moment about the front edge of the otter board was used to find out the angle of attack of the cambered otter board. When the warp length was 120m and 180m long and the towing speed was between 1.23 and 1.90 m/s, the estimated angle of attack of the cambered otter board was ranged between $26.1^{\circ}$ and $29.6^{\circ}$, respectively, though the maximum lift force was at the angle of attack $22.6^{\circ}$. The angle of attack of the otter board was tended to increase weakly with the longer length of warp (180 m) at the same towing speed in the experiment.

• Journal of the Korean Wood Science and Technology
• /
• 제45권3호
• /
• pp.327-334
• /
• 2017

본 연구에서는 각종 건축재료의 폼알데하이드 방출 특성 및 탄화보드에 의한 이들의 저감 효과를 알아보기 위하여 챔버법으로 성능을 분석하였다. 그 결과, 약 12일간 소형 챔버 내에서의 폼알데하이드 저감 성능은 탄화보드(90%), 죽탄보드(84%), 규조토판넬(82%), 알로펜타일(78%), 소나무판재(58%), MDF (54%), 석고보드(46%)의 순으로 나타났다. 또한 파티클보드(PB)로 채워진 $1.9m^3$ 크기의 챔버 내 폼알데하이드 방출량을 68일간 조사한 결과, 탄화보드 투입량이 증가함에 따라 폼알데하이드 방출량은 크게 감소하는 것으로 나타났다. 특히 챔버의 크기 및 PB 면적 대비 탄화보드를 각각 약 10% 및 30% 투입하면 폼알데하이드를 약 40% 및 75% 이상 저감시킬 수 있는 것으로 조사되었다.

• 복합신소재구조학회 논문집
• /
• 제5권3호
• /
• pp.23-31
• /
• 2014

Recently, sewer-pipe constructions replacing deteriorated pipes are currently underway in the downtown area. To resolve many problems in the conventional method of open-cut construction, lining-board system using light-weight GFRP panels is developed. The pultruded GFRP panels can be successfully used for the developed lining-board system as temporary decks and retaining walls in virtue of light weight, high strength and high durability. In this paper, the structural safety and serviceability of the lining-board system are examined through FE analyses and experiments. Further more, a field application of the lining-board system is presented. The field application shows that quality and environment of construction can be significantly improved.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권9호
• /
• pp.283-291
• /
• 2020

Although the corporate governance plays a crucial role in protecting shareholder wealth, the effect of corporate governance on cost of debt is unclear. On one hand, the corporate governance reduces asymmetric information between corporate and external investor including debtholder leading to a decreasing in cost of debt financing. On the other hand, bondholders require higher rate of return for an improvement corporate governance. Hence, this study aims to investigate the relationship between the mechanism to improve corporate governance namely board effectiveness and the cost of debt in an emerging market. As we aim to explore the relationship between cost of debt and board effectiveness, we select corporation in Thailand as our sample because the businesses in Thailand are major debt-financing. Hence, our sample include listed firm in Stock Exchange of Thailand between 2007 and 2016. Our main findings support the sub-optimal investment hypothesis in that improved board effectiveness is associated with higher cost of borrowing. In addition, we find that the number of board member-board size, the number of board meeting, and the percentage of non-executive on audit committee play are positively associated with the cost of debt financing. Furthermore, we perform two-stage-least square (2SLS) to ensure that our results are far from endogeneity issue.

• 대한조선학회논문집
• /
• 제58권2호
• /
• pp.112-120
• /
• 2021

The novel wave generating system of a wave flume has been devised by utilizing the analytic solution of wave board motion in idealized two dimensional space. The arbitrary oscillation motion of submerged wave board segment has been defined by sinusoidal motion of upper and lower end of the wave board. The analytic solution of the wave board motion has been represented by the solution of board motion due to flap motion and swing motion. Arbitrary oscillation of the board could be specified by determining amplitude, frequency, and the phase lag. A novel hybrid wave generator could be operated not only in piston motion but also in flap or swing motion by selection of control parameter. The wave generator has unique motion enhancing ability by appending flap motion or swing motion to piston motion in wave generation. In addition the hybrid wave generator has advantages in generating high quality wave spectrum of irregular wave in simulating real sea condition.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권12호
• /
• pp.11-19
• /
• 2020

This study examines the factors that affect firm's liquidity in manufacturing companies listed in Vietnam. Factors studied include the board size, the board independence, the firm size, the firm age, and its return. We use different metrics to measure firm's solvency status, including the cash ratio, the quick ratio, and the cash conversion cycle. Accordingly, three econometric models are built to test hypotheses proposed by researchers in order to explain the relationship between the five factors above and liquidity's measures. The study used the data set of manufacturing companies listed on the Ho Chi Minh City Stock Exchange in the period from 2015 to 2019. The final sample group comprises 139 firms with 633 observations. The results show that in manufacturing firms, while the cash ratio and the quick ratio are positively associated to the board size, the board independence, and the firm's profitability, the net operating cycle is negatively correlated to the board size, the firm size, the board independence, and the profitability. Therefore, larger firms with larger board size and more independent members can help to improve capital management efficiency.There is no evidence for the relationship between the firm age and solvency measurements, between cash conversion cycle and firm's profitability.