• Journal of Korean Orthopaedic Sports Medicine
• /
• v.7 no.2
• /
• pp.128-134
• /
• 2008

Purpose: We prospectively evaluated the clinical usefulness of the patellar inferior pole (PIP) as a landmark of the anteromedial (AM) portal for the arthroscopic surgery of the medial mensiscus posterior horn (MMPH). Materials and Methods: Group 1 (50 normal left knees of adults), Group 2 (10 normal knees under anesthesia), and Group 3 (50 consecutive knees undergoing elective arthroscopic surgery for relatively simple intraarticular pathologies, or diagnostic arthroscopy) were included. In Group 1 and 2, the true lateral (A) and valgus stress lateral radiographs (B) on $30^{\circ}$ flexion were obtained, and the lines (AM portal line) passing through the PIP and distal-most medial femoral condyle (MFC) were drawn under the condition without considering the thickness of articular cartilage of MFC (1, 2-A, B group), and considering it as 2.5mm on B (1, 2-C group). Then, we investigated the meeting point of the AM portal line with medial tibial plateau (C-D percentage), and measured the distance between the PIP and the anterior joint line (E-length), and medial tibial-femoral joint space (F-length). In Group 3, the AM portal was made at the PIP level and clinical usefulness of the approach to the MMPH and body of the lateral meniscus (LM) was analyzed. Results: The average C-D percentage came out as 85.8, 101.3, 69.1% for each Group 1-A, B, C, and 102.4, 144.6, 116.8% for each Group 2-A, B, C. Measured E-length was an average of 15.1 (Group 1-A), 15.5 (Group 1-B, C), 13.1 (Group 2-A), and 12.9 mm (Group 2-B, C) and the change by valgus stress had no statistical significance. The F-length increased about 1.2 (Group 1) and 3.6 mm (Group 2) when valgus stress was applied, which had statistical significance (p<0.001, p<0.001). In Group 3, 49, 48 knees were classified as good for the MMPH, and the body of LM in aspect of the clinical usefulness of AM portal made on the PIP level. Conclusion: We identified the clinical usefulness of the PIP as a skin landmark of AM portal for the arthroscopic surgery of the MMPH.

• Journal of the Korean Professional Engineers Association
• /
• v.28 no.4
• /
• pp.54-75
• /
• 1995

This synthesis has been prepared from a review of literature on Truck Escape Ramps technology and a survey of current practice by state department of transportation. Their locations have been determined usually from a combination of accident experience and en-gineering judgement, but new tools are emerging that can identify needs and sites without waiting for catastrophic accidents to happen. The Grade Severity Rating Systems holds promise in this regard. Design Procedures for truck excape ramps continue to evolve. Gravel arrester beds are clearly the preferred choice across the country Rounded aggregate, uniformly graded in the approximate size range of 13 to 18mm. Tech-nical publications typically have dassified TER types as paved gravity, sandpile, and ar-rester bed ramps. The design speed for vehicle entry into the ramp in critical to the deter-mination of ramp length. An escape ramp should be designed for a minimum entry speed of 130km/hr, a 145km/hr design being preferred. The ramps should be straight and their angle to the roadway align-ment should be as possible. The grade of truck escape ramps show the adjustment of ramp design to local topography, such as the tradeoff of ramp length against earthwork requirements. A width of 9 to 12m would more safety acommodate two or more outof con-trol vehicles. Reguarding comments on the most effective material, most respondents cited their own specification or referred to single graded, rounded pea gravel. The consensus essentially Is that single graded, well -rounded gravel is the most desirable material for use in arrester beds. The arrester beds should be constructed with a minimum aggregate depth of 30cm. Successful ramps have used depths between 30 and 90cm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6133-6145
• /
• 2013

With the increasing number of online wine stores, customers are increasingly seeking to purchase wine online. On the other hand, purchasing wine online is prohibited by law or regulation in Korea. Therefore, customers mainly search for wine information, inquire about wine products, and make a pre-purchase at an online wine store. Online wine stores play important roles in customer's purchase decision-making, and are likely to be a useful wine distribution channel in the near future. Therefore, the aim of this study was to identify the determinants of the online wine purchase intention, and examine the structural relationships between the determinants and online wine purchase intention. The site quality of online wine stores (information quality, system quality, service quality), and perceived value (quality value, price value, emotional value, social value) were selected as the determinants of online wine purchase intention based on literature review. The data was collected from those who had experience using an online wine store to purchase wine, and the data was used to test the proposed research model. The findings showed that the information quality was not related to the perceived value (quality value, price value, emotional value, social value). The system quality was proven to be positively and significantly related to the quality value, price value, and emotional value, whereas it had no impact on the social value. In addition, the service quality was found to affect the perceived value (quality value, price value, emotional and social value). Finally, the results showed that the quality value, emotional value, and social value have a positive impact on the online wine purchase intention, whereas the price quality is not related to the online wine purchase intention. These results are expected to make a contribution to a better understanding of how the quality of online wine stores and the customer's perceived value affect the online wine purchasing intention.

• Journal of Nutrition and Health
• /
• v.40 no.8
• /
• pp.719-727
• /
• 2007

To elucidate the relationship among the levels of nutrients intake, bone mineral density(BMD) and the urinary biochemical markers of bone metabolism, this survey is conducted with 225 postmenopausal women over 50 years of age. The urinary biochemical markers including deoxypyridinoline(DPD) and Ca excretion were measured. Bone mineral densities of lumbar spine(L2-L4), femoral neck, ward's triangle and trochanter were measured with dual-energy X-ray absorptiometry and the nutrient intake data obtained by 24 hr recall method. Mean age of all subjects was 64.8 years old, and the BMDs of the subjects were $0.86g/cm^2$(lumbar spine), $0.60g/cm^2$(femoral neck), $0.49g/cm^2$(trochanter), and $0.41g/cm^2$(ward's triangle). The results were compared among 3 groups with different nutrient intake levels classified by the percentage of Dietary Reference Intakes(DRIs) for Koreans as follows: low < 75% DRIs, 75% DRI $\leq$ adequate < 125% DRIs, high $\geq$ 125% DRIs. Bone mineral density of adequate protein intake group was significantly higher than those of low and high protein intake groups(p<0.05). Urinary DPD excretion was lowest in protein and calcium adequate intake groups(p<0.05, p<0.05), respectively. In relation to urinary Ca excretion, it is revealed to be considerably lower in the groups taking protein and vitamin C adequate intake(p<0.05, p<0.05). The percent DRI of protein and calcium were positively correlated with the BMD of the femoral neck after adjusted age(p<0.05, p<0.05). These results showed that there are probably some relationships between nutrient intake levels and urinary biochemical markers. For postmenopausal women with adequate nutrition expecially protein, calcium and vitamin C, has an important role to postpone bone resorption and to prevent the decrease of bone density.

• Journal of Nutrition and Health
• /
• v.40 no.6
• /
• pp.500-508
• /
• 2007

The purpose of this study was to investigate the influence of mixed NaCl-KCl salt on sodium intake and urinary excretion of sodium and potassium. In this study, 3-day food records for pre-experimental diet and 24-hr urine collected for 2-days, 6-day experimental diet food and 24-hr urine were used to evaluate the relationship between Na metabolism. In the experimental diet food, mixed NaCl-KCl salt was added. During the pre-experimental diet period, intakes of Na and K were 178.2 mEq and 56.4 mEq, respectively. The urinary excretion of Na and K in 24-hr were 139.6 mEq, 27.7 mEq, respectively and urinary Na/K ratio was 6.6. During the experimental diet period, intakes of Na and K were 130.2 mEq and 120.4 mEq, respectively. The urinary excretion of Na and K in 24-hr were 100.2 mEq, 37.1 mEq, respectively and urinary Na/K ratio was 2.8. According to this study, it is concluded that mixed NaCl-KCl salt diet decreased the intake of Na, and increased the intake of K.

• Journal of Nutrition and Health
• /
• v.42 no.5
• /
• pp.442-452
• /
• 2009

Smoking has been known to exacerbate the initiation and propagation of oxidative stresses. Efforts have been made to reduce the smoking-induced oxidative stresses using commercial dietary supplements. Propolis is the resinous substance collected by bees from the leaf buds and bark of trees, especially poplar and conifer trees. In this trial, we examined whether a daily supplementation of 800 mg propolis can protect endogenous lymphocytic DNA damage and modulate antioxidative enzyme activities and the level of antioxidant vitamin in smokers using a placebo-controlled, doubleblinded cross-over trial. After two weeks of running-in period, 29 smokers (mean age 34.38 ${\pm}$ 1.73) received 6 tablets/day of either propolis or placebo pills for 4 weeks. After 2 weeks of washout period the subjects switched they pills for cross-over study. The degree of DNA damage (assessed by tail DNA, tail length and tail moment) was not significantly changed with propolis intake or placebo intake. Similarly, total antioxidant status (TAS) remained at the same level regardless of the treatment. Erythrocyte catalase, glutathione peroxidase (GSH-Px), superoxide dismutase (SOD), plasma vitamin C and tocopherol level did not differ before and after propolis treatment, and did not differ between treatments. Putting all these results together, we would suggest that it is still too early to claim that propolis possess antioxidative activities.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.2
• /
• pp.120-132
• /
• 1993

A continuous hollow fiber membrane reactor(CHFMR) was developed and optimized for the production of yellowfin sole(Limanda aspera) skin gelatin hydrolysates using trypsin. The results were summerized as follows: The $K_m$ value of the CHFMR was 2.4 times higher than that of the batch reactor, indicating reduced enzyme affinity for the substrate. The $K_2$ value of the CHFMR was 8.5 times lower than that of the batch process, showing a significant reduction in trypsin activity in the CHFMR. The optimum operating conditions for the CHFMR process were $55^{\circ}C$, pH 9.0, flux 7.79 ml/min, residence time 77min, and trypsin to substrate ratio, 0.01(w/w) After operating for 60min under the above conditions, $79\%$ of the total amount of initial gelatin was hydrolysed. Enzyme leakage was observed through the 10,000 MWCO membrane after the 20min of reactor operation, while none occurred after 5hr. Total enzyme leakage was about $12.95\%$ at $55^{\circ}C$ for 5hrs. However, there was no apparent correlation between enzyme leakage and substrate hydrolysis. The membrane has a significant effect on trypsin activity loss for 60min of the CHFMR operation. The CHFMR operating with the membrane lost $34\%$ of the initial activity versus a $23\%$ loss of activity after 3hr in the continuous reactor lacking the hollow fiber membrane. The measurement of fouling property showed that relative flux reduction was $91\%$ and flux recover rate was $92\%$ at $10\%$ substrate solution. The productivity(378.85mg product/mg enzyme) of the CHFMR was more than 4 times higher than that of the batch reactor at $55^{\circ}C$.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.6
• /
• pp.41-51
• /
• 2015

The purpose of the Follies that were constructed for the Gwangju-Biennale were for urban regeneration, to activate the empty old-town areas, and to strengthen the tradition and sense of place of the city. However, the ten Follies constructed around the wall of the old castle reveal many problems including that of leaving Follies alone instead of actively using them, damage to shop-keepers nearby, and pedestrian inconvenience, which is different from the original purposes. This study is meant to help understand the source of the negative phenomena, and to offer plans that will be conductive to the role of urban regeneration through activating the Follies and the spaces around them. As results of the investigation, there was no context giving uniformity among the various Follies. Also, the study showed that the insufficience of designers' understanding of the circumference near the Follies and lack of a consensus between the citizens and designers in the process of making the Follies. The crucial solution for solving these problems, and bringing to life the original purpose of creating the Follies was derived as applying "human activity" to the Follies. This study suggested 'street performance' as an effective device for application to human activity. While a Folly has no fixed function, the development of space program categories based on the applied characteristics of each Folly, and the simulation thereof showed effective potential for attracting people and activating those stagnated spaces. Recently, Gwangju city depicted the second Follies in applications such as reading roon, toilet, and movable food cart, which have clear purpose and different characteristics from the first ones. However, the first Follies will not be moved or demolished. As they are located around the National Asia Culture Center, some of them are supposed to be used to view the center. Consequently, a counterplan for the continuous and efficient use of those Follies is needed. Gwangju has a plan for the installation of 100 Follies throughout the city and it is expected that this study will be a meaningful guide line for improved Follies in the future.

• Journal of Nutrition and Health
• /
• v.48 no.2
• /
• pp.199-210
• /
• 2015

Purpose: The purpose of this study was to determine the influence of sustainability management in institutional foodservice on store image and behavioral intention (revisit intention, word of mouth, willingness to pay a premium). Methods: Based on a total of 371 samples obtained from the empirical research, this study reviewed the reliability and fitness of the model. Results: According to results of exploratory factor analysis, sustainability management derived three factors, economic value, socially responsible, and environmentally sound. The structural equation modeling showed that social responsibility in sustainability management had a significant positive effect on store image and behavioral intention. In addition, customer's perceived store image in foodservice had a significant positive effect on behavioral intention. The relationship between sustainability management and behavioral intention was found to be a partially significant effect. Conclusion: The results of this study revealed the importance of sustainability management of foodservice to improve store image and behavioral intention.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.467-474
• /
• 2014

Preliminary design in chemical process furnishes economic feasibility through calculation of both mass balance and energy balance and makes it possible to produce a desired product under the given conditions. Through this design stage, the process possesses unchangeable characteristics, since the materials, reactions, unit configuration, and operating conditions were determined. Unique characteristics could be very economic, but it also implies various potential risk factors as well. Therefore, it becomes extremely important to design process considering both economics and safety by integrating process simulation and quantitative risk analysis during preliminary design stage. The target of this study is LNG liquefaction process. By the simulation using Aspen HYSYS and quantitative risk analysis, the design variables of the process were determined in the way to minimize the inherent explosion risks and operating cost. Instead of the optimization tool of Aspen HYSYS, the optimization was performed by using stochastic optimization algorithm (Covariance Matrix Adaptation-Evolution Strategy, CMA-ES) which was implemented through automation between Aspen HYSYS and Matlab. The research obtained that the important variable to enhance inherent safety was the operation pressure of mixed refrigerant. The inherent risk was able to be reduced about 4~18% by increasing the operating cost about 0.5~10%. As the operating cost increases, the absolute value of risk was decreased as expected, but cost-effectiveness of risk reduction had decreased. Integration of process simulation and quantitative risk analysis made it possible to design inherently safe process, and it is expected to be useful in designing the less risky process since risk factors in the process can be numerically monitored during preliminary process design stage.