• Title/Summary/Keyword: In-band 방식

Search Result 966, Processing Time 0.025 seconds

P2P query processing method between ontologies in internet environment (인터넷상의 온톨로지간의 P2P 질의처리 방안)

  • Kim, Byung-Gon;Oh, Sung-Kyun
    • Journal of Digital Contents Society
    • /
    • v.10 no.2
    • /
    • pp.239-247
    • /
    • 2009
  • In simple topology in network system, query should be delivered to all linked peers for query processing. This causes waste of transmission band width and throughput of each peer. To overcome this, as well as query processing strategy, efficient routing technique to deliver query to proper peer is needed. For efficient routing, clustering of peers in P2P networks is important. Clustering of P2P network bases on that combines peers that have similar characteristics in same cluster reduces quantity of message in network than assign peer for cluster randomly. In this paper, we propose clustering techniques for ontology based P2P query processing. Similarity measure point, cluster index structure, and query processing steps in ontology based P2P cluster environment are proposed.

  • PDF

A Initial Channel Estimation Method Based on Extensive Preamble Utilization in MB-OFDM UWB System (프리엠블 확장 사용 기반 MB-OFDM UWB용 채널 추정 방식)

  • Jeong, Jin-Doo;Jin, Yong-Sun;Chong, Jong-Wha
    • 전자공학회논문지 IE
    • /
    • v.48 no.1
    • /
    • pp.30-35
    • /
    • 2011
  • In this paper, we propose a method to improve the performance of initial channel estimation (CE) for the multiband-OFDM (MB-OFDM) UWB. The performance of the initial CE can be generally improved as increasing the number of the used preamble symbols. The MB-OFDM specification presents two CE symbols per band in preamble format. The performance of CE estimation with two CE symbols may be satisfied in relatively high sensitivity -77.5 and -72.5 dBm for 200 Mbps and 480 Mbps data rate, respectively, but can not be enough in the degraded 55 Mbps and 110 Mbps sensitivities such as -83.5 and -80.5 dBm, respectively. A method proposed in this paper achieves the performance improvement by extending CE estimation region to packet synchronization (PS) symbols and frame synchronization (FS) symbols including two CE symbols. This can improve the CE performance in the degraded SNR and increase the link-margin by reducing the error rate in physical-layer header. The link-margin improvement obtained by the proposed CE preamble can induce the decrease of error-rate in physical-layer header and increase of communication throughput. Simulation results for the proposed initial method show that the performance is improved by about 0.7 dB at 10-4 bit-error-rate using '4' symbols than initial method using only two CE symbols.

A Pipelined Design of the Block Cipher Algorithm SEED (SEED 블록 암호 알고리즘의 파이프라인 하드웨어 설계)

  • 엄성용;이규원;박선화
    • Journal of KIISE:Computer Systems and Theory
    • /
    • v.30 no.3_4
    • /
    • pp.149-159
    • /
    • 2003
  • The need for information security increases interests on cipher algorithms recently. Especially, a large volume of data transmission over high-band communication network requires faster encryption and decryption techniques for real-time processing. It would be a good solution for this problem that we implement the cipher algorithm in forms of hardware circuits. Though some previous researches use this approach, they focus only on repeatedly executing the core part of the algorithm to minimize the hardware chip size, while most cipher algorithms are inherently parallel. In this paper, we propose a new design for the SEED block cipher algorithm developed by KISA (Korea Information Security Agency) in 1998 as Korean standard cipher algorithm. It exploits the parallelism of the algorithm basically and implements it in a pipelined fashion. We described the design in VHDL program and performed functional simulations on the program, and then found that it worked correctly. In addition, we synthesized it and verified that it could be implemented in a single FPGA chip, implying that the new design can be Practically used for the actual hardware implementation of a high-speed and high-performance cipher system.

IEEE 802.16 WMAN MAC Protocol for the Coexistence with WLAN in Shared Bands (공유대역에서 무선 LAN과의 공존을 위한 IEEE 802.16 WMAN의 MAC 프로토콜)

  • Han, Ho-Seong;Rhee, Seung-Hyong;Park, Su-Won;Han, Ki-Young;Kang, Hyon-Goo;Yoon, Soon-Young
    • Journal of KIISE:Information Networking
    • /
    • v.37 no.2
    • /
    • pp.142-149
    • /
    • 2010
  • In this paper, we propose to modify the IEEE 802.16 MAC protocol in order to allow the coexistence of IEEE 802.11 and IEEE 802.16 wireless networks in shared bands. Our suggested protocol enables 802.16 WMAN to control WLAN devices for the coexistence. That is, in the downlink subframes(BS to SS), SS(Subscriber Station) prohibits WLAN to transmit by using CTS(Clear to Send) in order to protect it's burst. In the uplink subframes(SS to BS), on the other hand, BS(Base Station) sends CTS to block WLAN's communications. Our proposals enables the coexistence between WLAN and WMAN, and simulation results show that our protocols enhance the throughput of the entire system.

MAC Scheduling Algorithm in IEEE 802.15.3 HR-WPAN (고속 무선 개인화 네트워크를 위한 MAC 스케줄링 알고리즘)

  • Joo Sung-Don;Lee Chae-Woo
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.42 no.6 s.336
    • /
    • pp.41-52
    • /
    • 2005
  • In wireless networks there are various errors, caused by multi-path fading and interference between devices which lower the network Performance. Especially, performance of IEEE 802.IS.3 High-Rate WPAN (Wireless Personal Area Network) which is operated in ISM unlicensed frequency band is easily affected by channel errors. In this paper, we propose a scheduling algorithm which takes channel errors into consideration in scheduling asynchronous data traffic. The proposed scheduling algorithm can allocate CTA(Channel Time Allocation) proportionally in accordance with the requested channel time of each device. It also prevents waste of channel time by allocating CTA of the channel-error devices to other channel-error free devices. After recovering from the channel error, the devices are compensated as much as they conceded during channel error status. Simulation results show that the proposed scheduling algorithm is superior to the existing SRPT(Shortest Remain Processing Time) and RR(Round Robin) in throughput and fairness aspects.

A Study on Link Analysis of Telemetry Rocket-borne Antenna (텔레메트리 로켓 탑재 안테나의 회선 분석에 관한 연구)

  • 김성완;황수설;이재득
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.15 no.3
    • /
    • pp.311-318
    • /
    • 2004
  • It is required to design the RF link with sufficiently stable signal margin to minimize bit errors and improve the quality of received data in the telemetry system modulated digitally like PCM/FM. In case of the vehicle flying at a high speed, the variation of the gain pattern between transmitting and receiving antenna and the fee space loss due to flight distance cause the fluctuation of link. In this paper, KSR(Korea Sounding Rocket)- III, the first domestic liquid rocket which was successfully launched in Nov. 2002 is introduced. The SNR(signal-to-noise ratio) variation of the telemetry signal which was measured at S-band ground station, the one which was simulated considering the flight trajectory, and the attitude variation such as roll, pitch and yaw are compared, analyzed, and agree very well. In addition, two virtual flying situations are simulated and evaluated-only one antenna is equipped in one case, and rocket is roll-free in the other.

The hybrid method of Listen-Before-Talk and Adaptive Frequency Hopping for coexistence of Bluetooth and WLAN (블루투스 및 무선 LAN 시스템의 동시지원을 위해 Listen-Before-Talk 기법을 결합한 Adaptive Frequency Hopping 방식의 제안)

  • ;Bin Zhen
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.27 no.7B
    • /
    • pp.706-718
    • /
    • 2002
  • In bluetooth system, there are two kinds of interference. One is the frequency static interference, for example 802.11 direct sequence, the interferer uses fixed frequency band. Another is frequency dynamic interference, for example other piconets or 802.11 frequency hopping, the interferer uses dynamic frequency channel and cant be estimated. In this paper we introduce a novel solution of hybrid method of Listen-Before-Talk (LBT) and Adaptive Frequency Hopping (AFH) to address the coexistence of bluetooth and Direct Sequence of wireless local area network (WLAN). Before any bluetooth packet transmission, in the turn around time of the current slot, both the sender and receiver sense the channel whether there is any transmission going on or not. If the channel is busy, packet transmission is withdrawn until another chance. This is the LBT in Bluetooth. Because of asymmetry sense ability of WLAN and bluetooth, AFH is introduced to combat the left front-edge packet collisions. In monitor period of AFH, LBT is performed to label the channels with static interference. Then, all the labeled noisy channels are not used in the followed bluetooth frequency hopping. In this way, both the frequency dynamic and frequency static interference are effectively mitigated. We evaluate the solution through packet collision analysis and a detail realistic simulation with IP traffic. It turns out that the hybrid method can combat both the frequency dynamic and frequency static interference. The packet collision analysis shows it almost doubles the maximal system aggregate throughput. The realistic simulation shows it has the least packet loss.

A New Closed-form Transfer Fuction for the Design of Wideband Lowpass MAXFLAT FIR filters with Zero Phase (제로 위상을 갖는 광대역 저역통과 MAXFLAT FIR 필터 설계를 위한 새로운 폐쇄형 전달 함수)

  • Jeon, Joon-Hyeon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.32 no.7C
    • /
    • pp.658-666
    • /
    • 2007
  • In general, the earlier linear-phase MAXFLAT(maximally flat) lowpass FIR filters have the main disadvantage of a gain response in the half frequency band $(0{\leq}w{\leq}{\pi}/2)$ by the closed form transfer functions used in design techniques for realizing them. Moreover, most of them has existent problems as follows : ripple error in the stopband, gentle-cutoff attenuation, phase and group delay and inexact cutoff frequency response. It is due to the approximation algorithms such as Chebyshev norm and Remez exchange which are used to approach MAXFLAT and linear-phase characteristics in frequency domain. In this paper, a new mathematically closed-form transfer function is introduced for the design of MAXFLAT lowpass FIR filters which have the zero-phase and wideband-gain response. In addition, we verify that the closed-form transfer function is easily realized due to our generalized formulas derived newly by using MAXFLAT conditions including an arbitrary cutoff point. This method is, therefore, useful for "simple and quick designs". Conclusively, we propose a technique for the design of new zero-phase wideband MAXFLAT lowpass FIR filters which can achieve sharp-cutoff attenuation exceeding 250 dB almost everywhere.

Gas Temperature Measurement in Supersonic Flows by N2+ Emission Spectroscopy (질소 이온 발광 분광법을 이용한 초음속 유동의 기체 온도 측정)

  • Shin, Ji-Chul
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.34 no.3
    • /
    • pp.245-250
    • /
    • 2010
  • The procedure for estimating the gas (rotational) temperature of an air discharge in supersonic flows is presented in detail. Since direct measurement of the temperature in a supersonic flow is difficult, a nonintrusive measurement was performed by optical emission spectroscopy based on the emission spectra of nitrogen molecular ions. A detailed explanation, including the equations for emission line intensity, is presented in order to understand the structure of the emission spectra of nitrogen molecular ions. Using the obtained representation for emission spectrum, a synthetic spectrum of the first negative system of $N_2^+$ is obtained, and it is compared with the experimentally measured spectrum. Within a relative error of approximately 6.8% for the overall band spectra, the synthetic and measured spectra agree well. In the case of a 25-mA DC air discharge in a supersonic (Mach 3) flow, the gas temperature profile shows an approximately linear variation and a peak temperature of approximately 350 K.

A Study on the Establishment of Redundancy for Stable Operation of Integrated Railway Network (LTE-R) (철도통합무선망(LTE-R)의 안정적인 운영을 위한 이중화 구축 방안 연구)

  • Pyo, Seung-ho
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.20 no.2
    • /
    • pp.51-58
    • /
    • 2019
  • The LTE system decided to build an integrated disaster safety communication network in order to cope with disasters quickly after the April 16, 2014 disaster, and 333 agencies in 8 areas will build a unified disaster safety communication network. It plans to integrate LTE-R, a railway integrated wireless network, and LTE-M, a land-based communication network, in the 700MHz band. LTE-R, a wireless integrated network, and the Ministry of Land, Transport and Maritime Affairs, are currently using VHF and TRS, which are voice communication-oriented communication systems, in order to cope with demand for high-speed railway service, With this possible LTE-R, it is possible to provide advanced services such as radio-based train control and improve railway safety. The company plans to invest KRW 1.1 trillion in new routes to be launched in 2018 and the existing route to be improved in the future, and to build up all routes of general and high-speed railways to LTE-R by 2027.