• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.233-236
• /
• 2005

국내외적으로 M/W 중계용 주파수 대역은 3${\sim}$30GHz 대역이다. 그러나 갈수록 늘어나는 서비스와 전송용량의 증대로 인해 주파수 부족현상이 일어나는 추세이다. 이에 대한 방안으로 주파수 재배치에 관한 문제가 대두되고 있다. 이동방송 중계용 링크인 FPU 링크는 차후 다른 주파수 대역으로 이전시 이전의 링크에서 사용되었던 시스템 제원을 토대로 필요한 대역에 대해 다양한 변조방식으로 시뮬레이션 평가 후 이용채널 개수 및 이전 가능 여부등과 같은 조치가 수행되어져야 한다. 본 논문에서는 M/W 대역 휴대용 디지털 무선전송 시스템으로써 디지털 FPU 링크 시스템을 모델링하고 이동환경에서 발생하는 도플러 천이 효과를 고려한 Clark & Gans 페이딩 채널 모델을 고려하여 페이딩의 영향에 따른 시스템 성능을 분석하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.389-391
• /
• 2011

This paper has been studied about design of linear 25Watt Power amplifier for VDR(VHF Data Radio). VDR's frequency band is 117.975~137MHz, and CSMA(Carrier Sense Multiple Access), D8PSK(Differential Eight Phase Shift Keyed), 25KHz's channel bandwidth use. It also stated in DO-281A MOPS output power, symbol constellation error, spurious emissions, adjacent channel power must be met. HPA is designed to meet DO-281A standard.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.507-510
• /
• 2010

OFDM(Orthogonal Frequency Division Multiplexing)은 하나의 데이터 열(data stream)을 낮은 데이터 전송률을 갖는 작은 데이터로 나누고, 이들을 부반송파(subcarrier)를 통해 동시에 전송한다. OFDM이 차세대 전송방식으로 채택된 이유는 주파수 선택적 페이딩(frequency selective fading)이나 협대역(narrow band)간 간섭에 받는 영향이 적어 고속 통신이 가능하기 때문이다. 본 논문에서는 RS 부호(Reed-Solomon Code)를 사용하여 OFDM에서 대용량 데이터를 전송할 때 발생하기 쉬운 연집 오류(burst error)를 정정하도록 하였다. 또한 채널 사이에 파일롯 심볼(pilot symbol)을 삽입하여 채널 추정을 통한 신호의 타이밍 오류도 고려하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2007.11a
• /
• pp.248-251
• /
• 2007

OFDM(Orthogonal Frequency Division Multiplexing)은 하나의 데이터 열(data stream)을 낮은 데이터 전송률을 갖는 작은 데이터로 나누고, 이들을 부반송파(subcarrier)를 통해 동시에 전송한다. OFDM이 차세대 전송방식으로 채택된 이유는 주파수 선택적 페이딩(frequency selective fading)이나 협대역(narrow band)간 간섭에 받는 영향이 적어 고속 통신이 가능하기 때문이다. 본 논문에서는 RS 부호(Reed-Solomon Code)를 사용하여 OFDM에서 대용량 데이터를 전송할 때 발생하기 쉬운 연집 오류(burst error)를 정정하도록 하였다. 또한 채널 사이에 파일롯 심볼(pilot symbol)을 삽입하여 채널 추정을 통한 신호의 타이밍 오류도 고려하였다.

• Korea Multimedia Society
• /
• v.1 no.1
• /
• pp.19-32
• /
• 1997

There are many kinds of predominant modes to transfer Multimedia information on internet in the world. Various methods are applied to get real time multimedia data as possible as we need. At the moment it is very difficult to use acceptable technologies for performe those methods effectively on the Networks. This paper gives the alternative directions and trends for research and development of multimedia transmission on the internet. ATM is one of the best mode to transfer mass-multimedia data at the high speed on the Broad-Band ISDN until now. And xDSL (xDigital Subscriber Line) is an excellent typical method on the PSTN (Public Switched Telephone Network) using old type telephone line. But they are not yet applied into the phase of practical use together this time. So this paper analyzes what we need and how to develop the multimedia transmission modes which we can send on the internet without a problem or any difficulty for our various multimedia information all the time under low cost and high speed.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.3
• /
• pp.307-317
• /
• 2020

The barrier structure of the skin's epidermis is a key structure to prevent the loss of water inside the body and the invasion of foreign substances, and is composed of keratinocytes and intercellular lipids. At this time, the intercellular lipids of the skin barrier has the strongest structure when packed in an orthorhombic structure. However, it is damaged by various external causes and changes to a hexagonal structure. This change in physical structure can be analyzed non-invasively by analyzing the signal of the CH₂-CH₂ scissoring band of lipids using FT-IR. In this study, SDS was treated on porcine skin to construct a skin barrier damage model, and the degree of change in packing structure was quantified by analyzing FT-IR signals. We then judged whether the barrier of the damage model was recovered according to the treatment of the cosmetic formulation. From these results, an indirect method of measuring the water evaporation of the skin barrier to date can be supplemented. In addition, physical changes in the structure of the skin barrier can be utilized in a direct and efficient manner to identify the function and verify the formulation of various materials.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.574-580
• /
• 2016

In this paper, we will introduce the system that can control multiple vehicles on the road through Single Board Computers and V2I (Vehicle-To-Infrastructure). Also, we will propose the group evasive maneuver decision algorithm, which plays a critical role in deciding whether the vehicles in the system have to conduct evasive maneuvers to avoid obstacles on the road. In order to test this system, we have utilized Wi-Fi and TCP/IP for establishing the communication between multiple vehicles and the relay server, and observed their driving states on the road with obstacles. During the experiments, we have discovered that our original decision algorithm possesses high failure rate when there is frequency interference in ISM (Industrial Scientific Medical) band. In order to reduce this failure rate, we have implemented the data transition detector. This paper will focus on how the use of data transition detector can affect the reliability of the system under the frequency interference of ISM band. If this technology is improved and applied in the field, we will effectively deal with such dangerous situations as multiple collision accidents through vehicle-to-vehicle communication or vehicle-to-infrastructure communication. Furthermore, this can be applied to the autonomous driving technologies. This can be used as the reference data for the development of the similar system.

• The KIPS Transactions:PartC
• /
• v.19C no.4
• /
• pp.239-246
• /
• 2012

The function of location estimation in WPAN has been studied and specified on the ultra wide band optionally. But the devices based on CSS(Chirp Spread Spectrum) specification has been used widely in the market because of its functionality, cheapness and support of development. As the CSS device uses 2.4GHz for a carrier frequency and the sampling frequency is lower than that of the UWB, the resolution of a timestamp is very coarse. Then actually the error of a measured distance is very large about 30cm~1m at 10 m depart. And the location error in ($10m{\times}10m$) environment is known as about 1m~2m. So for some applications which require more accurate location information, it is very natural and important to develop a sophisticated post processing algorithm after distance measurements. In this paper, we have studied extended Kalman filter with the frequency offsets of anchor nodes, and proposed a novel algorithm frequency offset compensated extended Kalman filter. The frequency offsets are composed with a variable as a common frequency offset and constants as individual frequency offsets. The proposed algorithm shows that the accurate location estimation, less than 10cm distance error, with CSS WPAN nodes is possible practically.

• Korean Journal of Remote Sensing
• /
• v.12 no.1
• /
• pp.1-16
• /
• 1996

Korea Aerospace Research Institute(KARI) is developing a Korea Multi-Purpose Satellite I(KOMPSAT-I) which accommodates Electro-Optical Camera(EOC), Ocean Color Imager(OCI), Space Physics Sensor(SPS) for cartography, ocean color monitoring, and space environment monitoring respectively. The satellite has the weight of about 500 kg and is operated on the sun synchronized orbit with the altitude of 685km, the orbit period of 98 minutes, and the orbit revisit time of 28days. The satellite will be launched in the third quarter of 1999 and its lifetime is more than 3 years. EOC has cartography mission to provide images for the production of scale maps, including digital elevation models, of Korea from a remote earth view in the KOMPSAT orbit. EOC collects panchromatic imagery with the ground sample distance(GSD) of 6.6m and the swath width of 15km at nadir through the visible spectral band of 510-730 nm. EOC scans the ground track of 800km per orbit by push-broom and body pointed method. OCI mission is worldwide ocean color monitoring for the study of biological oceanography. OCI is a multispectral imager generating 6 color ocean images with and <1km GSD by whisk-broom scanning method. OCI is designed to provide on-orbit spectral band selectability in the spectral range from 400nm to 900nm. The color images are collected through 6 primary spectral bands centered at 443, 490, 510, 555, 670, 865nm or 6 spectral bands selected in the spectral range via ground commands after launch. SPS consists of High Energy Particle Detector(HEPD) and Ionosphere Measurement Sensor(IMS). HEPD has mission to characterize the low altitude high energy particle environment and to study the effects of radiation environment on microelectronics. IMS measures densities and temperature of electrons in the ionosphere and monitors the ionospheric irregularities in KOMPSAT orbit.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.3
• /
• pp.44-51
• /
• 2001

In general, the realization of spaceborne system is constrained by its space environment. In this paper, we suggest chirp stitching technique which generates and processes wideband radar signal with minimum hardware, design and implement transmit/receive equipments and operating programs to satisfy the requirement of this spaceborne high resolution SAR(Synthetic Aperture Radar). We apply the top down design approach to this system, and divide hardware into equipment, module and circuit levels, and software into SR(Software Requirement), AD(Architecture Design), DD(Detailed Design) and coding levels, and then extract each requirement to satisfy the wideband requirement of this spaceborne high resolution SAR. We, at first, test the hardware functions, confirm the wideband handling capability of this system with 85MHz wideband signals generated from two 42.5MHz narrow band signals, and show that this system can be used in spaceborne high resolution SARs.