• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.376-376
• /
• 2010

The single crystals of p-$CdIn_2Te_4$ were grown by the Bridgman method without the seed crystal. From photocurrent measurements, it was found that three peaks, A, B, and C, correspond to the intrinsic transition from the valence band states of $\Gamma_7$(A), $\Gamma_6$(B), and $\Gamma_7$(C) to the conduction band state of $\Gamma_6$, respectively. The crystal field splitting and the spin orbit splitting were found to be 0.2360 and 0.1119 eV, respectively, from the photocurrent spectroscopy. The temperature dependence of the $CdIn_2Te_4$ band gap energy was given by the equation of $E_g(T)=E_g(0)-(9.43{\times}10^{-3})T^2/(2676+T)$. $E_g$(0) was estimated to be 1.4750, 1.7110, and 1.8229 eV at the valence band states of A, B, and C, respectively. The band gap energy of p-$CdIn_2Te_4$ at room temperature was determined to be 1.2023 eV.

• 전자공학회논문지A
• /
• 제29A권9호
• /
• pp.56-64
• /
• 1992

Because of a small bandgap energy, a high doping density, and a low operating temperature, the dark current in HgCdTe photodiode is almost composed of a tunneling current. The tunneling current is devided into an indirect tunneling current via traps and a band-to-band direct tunneling current. The indirect tunneling current dominates the dark current for a relatively high temperature and a low reverse bias and forward bias. For a low temperature and a high reverse bias the direct tunneling current dominates. In this paper, to verify the tunneling currents in HgCdTe photodiode, the new tunneling-recombination equation via trap is introduced and tunneling-recombination current is calculated. The new tunneling-recombination equation via trap have the same form as SRH (Shockley-Read-Hall) generation-recombination equation and the tunneling effect is included in recombination times in this equation. Chakrabory and Biswas's equation being introduced, band to band direct tunneling current are calculated. By using these equations, HgCdTe (mole fraction, 0.29 and 0.222) photodiodes are analyzed. Then the temperature dependence of the tunneling-recombination current via trap and band to band direct tunneling current are shown and it can be known what is dominant current according to the applied bias at athe special temperature.

• 한국전자파학회논문지
• /
• 제23권8호
• /
• pp.878-887
• /
• 2012

항공 주파수는 항공 안전을 위한 국제적인 보호 주파수 대역이다. 최근 항공 교통량의 증가로 국제적으로 항공 주파수가 포화되고, 혼잡 대역에서 간섭 영향이 높아지는 추세이다. 본 논문에서는 국내 항공 주파수의 효율적인 분배와 관리를 위하여 미국과 같은 선진국과 일본과 같은 주변국의 항공 주파수 정책을 방문 조사 분석하고, 국내의 항공주파수 운용 현황을 조사 분석하여 향후 효율적인 항공주파수 정책 수립 방안을 제시하였다. 또한, 차세대 항행 장비 도입에 따른 추가적인 항공주파수 대역 확보 방안과 항공 안전을 위한 간섭 및 혼신 현황을 분석하여 지속적인 간섭 감시와 억제를 위한 대응 방안을 제시하였다. 본 항공 주파수 정책 연구 결과는 향후 항공 주파수 대역 분배 및 관리 정책 개선에 기여할 것으로 판단한다.

• Structural Engineering and Mechanics
• /
• 제40권3호
• /
• pp.373-392
• /
• 2011

Periodic and quasi-periodic Timoshenko beams on Pasternak foundation are investigated using the differential quadrature method. Not only band gaps in the beams but also the dynamic response of them is analyzed. Numerical results show that vibration in periodic beams can be dramatically attenuated when the exciting frequency falls into band gaps. Different from the band structures of periodic beams without foundation, the so-called critical frequency was found because of the Pasternak foundation. Its physical meaning was explained in detail and a useful formula was given to calculate the critical frequency. Additionally, a comprehensive parameter study is conducted to highlight the influence of foundation modulus on the band gaps.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.225-228
• /
• 1999

In a plastically deformed body the formation of a shear band is widely observed in the engineering materials during rapidly forming process for a thermally rate-sensitive material. The localized shear bond stems from evolution of a narrow region in which intensive plastic flow occurs. The shear band often plays as a precursor of the ductile fracture during a forming process. The objectives of this study are to investigate the localization behaivor by using numerical method thus predict the failure. In this work the implicit finite difference scheme is preformed due to the ease of covergence and the numerical stability. This study is based on an analysised material with hardening as well as thermally softening behavior which includes isotropy strain hardening. Furthermore this paper suggests that an anticipated and suggested a kinematic hardening constitutive equation be requried to predicte a more accurate strain level wherein a shear band occurs.

• 한국전기전자재료학회논문지
• /
• 제18권2호
• /
• pp.130-135
• /
• 2005

In this papers, we made study for plastic chip antenna, the plastic is Foamex with the circle of PVC and its electric characteristics are dielectric constant 1.9, insulation intensity 112 KV/cm. The proposed antenna is same as the conventional antennas are usually constructed with ceramic chip, which are not fragile in nature and don't tend to break easily. Therefore the proposed antenna with its advantage is attractive for application in mobile antenna. In order to valid the proposed papers, it is implemented the antennas of four types and experimented. From the results, we conformed that the antennas are operated at the dual band which is cellular band and Korea-PCS band. And the gain of the antennas has about above -2 dB and the pattern is same as conventional antennas. From this papers, the realized antennas using Foamex material will be application for mobile phone antenna.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.3-6
• /
• 1988

The UCERSS algorithm is an extended MUSIC which is used to estimate incident angles of multiple wide band signals. The purpose of this paper is to extend the UCERSS in order to estimate the direction of arrivals of multiple wide band signals in multipath environment. The modifications of the UCERSS result in the wide band spatial smoothing and the UNSS approaches. Computer simulation results indicate that the performances of the UNSS are superior to those of the UCERSS and the wide band spatial smoothing method.

• 한국컴퓨터정보학회논문지
• /
• 제20권11호
• /
• pp.111-118
• /
• 2015

In this paper, we propose a new tinnitus treatment system that removes the frequency band where the ear noises is generated and amplifies the around frequency bands in order to treat a nonstop buzzing in the ears, that is one among the disease commonly generated in modern people. Mostly the tinnitus is generated by the tunability with the neighboring nerves while the part of the cerebral cortex which is unable to react to the stimuli by the sound of the specific frequency band reacts to other frequency band. Therefore, the excitability activity by the tunability of the cerebral cortex is suppressed and the remedial value is gotten by removing the tinnitus frequency band, and the around frequency bands are amplified to strengthen the remedial value. Experimental results show that the tinnitus can be treated conveniently if the patients use the android application which the proposed technique is applied to.

• 전기학회논문지
• /
• 제58권10호
• /
• pp.2016-2021
• /
• 2009

In this paper, a dual-band antenna aimed for a mobile communication repeater was designed and measured. The operating frequency ranges are GSM(870${\sim}$960 MHz) and WCDMA(1920${\sim}$2170 MHz) bands. Experimental and numerical studies are performed for various design variables such as slot lengths. Using two meandering slots in the ground plane, we can obtain two higher resonant frequencies significantly with broader bandwidths. The measured maximum gain of antenna is 2 dBi in the GSM band and 2.45 dBi in the WCDMA band.

• Advances in aircraft and spacecraft science
• /
• 제3권3호
• /
• pp.299-315
• /
• 2016

In this work, a strategy for passive vibration control of periodic structures is proposed which involves adding a periodic array of simple resonant devices for creating band gaps. It is shown that such band gaps can be generated at low frequencies as opposed to the well known Bragg scattering effects when the wavelengths have to meet the length of the elementary cell of a periodic structure. For computational purposes, the wave finite element (WFE) method is investigated, which provides a straightforward and fast numerical means for identifying band gaps through the analysis of dispersion curves. Also, the WFE method constitutes an efficient and fast numerical means for analyzing the impact of band gaps in the attenuation of the frequency response functions of periodic structures. In order to highlight the relevance of the proposed approach, numerical experiments are carried out on a 1D academic rod and a 3D aircraft fuselage-like structure.