• Korean Journal of Food Science and Technology
• /
• v.43 no.2
• /
• pp.243-248
• /
• 2011

The prevalence and distribution of hazardous microorganisms were investigated from the major perilla cultivation area at Milyang, Gyeongnam province, Korea. Aerobic plate count (APC) and coliform count of perilla leaves were 4.82 log CFU/g and 3.85 log CFU/g, respectively. E. coli, S. aureus and B. cereus were detected in 3.0% (4/114), 7.9% (9/114) and 46.5% (53/114) of examined perilla leaves. However, E. coli O157:H7, Salmonella spp, and L. monocytogenes were not detected. The distribution of hazardous microorganisms in perilla leaf cultivation environment were compared and the concentration of APC and coliform counts were more than 3.0 log CFU/(mL, g, $100cm^2$, hand) from most of the samples. S. aureus were detected from irrigation water, packing table, packing vinyl, hand, and clothes. Also, B. cereus was frequently detected from the examined samples. Especially, packing table and collection container were contaminated with maximum 5.5 log $CFU/100cm^2$ of B. cereus. Good Agricultural Practice (GAP) system should be introduced to farms to enhance the safety of perilla leaves.

• Restorative Dentistry and Endodontics
• /
• v.36 no.3
• /
• pp.203-210
• /
• 2011

Objectives: The purpose of this study was to evaluate the effect of various application methods of one-step self-etch adhesives to microtensile resin-dentin bond strength. Materials and Methods: Thirty-six extracted human molars were used. The teeth were assigned randomly to twelve groups (n = 15), according to the three different adhesive systems (Clearfil Tri-S Bond, Adper Prompt L-Pop, G-Bond) and application methods. The adhesive systems were applied on the dentin as follows: 1) The single coating, 2) The double coating, 3) Manual agitation, 4) Ultrasonic agitation. Following the adhesive application, light-cure composite resin was constructed. The restored teeth were stored in distilled water at room temperature for 24 hours, and prepared 15 specimens per groups. Then microtensile bond strength was measured and the failure mode was examined. Results: Manual agitation and ultrasonic agitation of adhesive significantly increased the microtensile bond strength than single coating and double coating did. Double coating of adhesive significantly increased the microtensile bond strength than single coating did and there was no significant difference between the manual agitation and ultrasonic agitation group. There was significant difference in microtensile bonding strength among all adhesives and Clearfil Tri-S Bond showed the highest bond strength. Conclusions: In one-step self-etching adhesives, there was significant difference according to application methods and type of adhesives. No matter of the material, the manual or ultrasonic agitation of the adhesive showed significantly higher microtensile bond strength.

• Korean Journal of Crystallography
• /
• v.3 no.1
• /
• pp.9-22
• /
• 1992

Two crystal structures of bromine sorption complexes of vacuum dehydrated Cd(ll)-exchanged zeolite A have been determined by single-crystal xray diffraction techniques in the cubic space group Pm3m at 21(1) ℃. Both crystals were ion exchanged in flowing streams of exchange solution In which mole ratio of Cd(NO3)2 and Cd(OOCCH3)B was 1:1 with a total concentration of 0.05 M. First crystal was dehydrated at 450℃ and 2 ×10-6 Torr for two days. Second crystal was dehydrated at 650℃ and 2 ×10-6 Torr for two days. Both crystals were then treated with 160 Torr for two days. Second crystal was dehydrated at 650℃ and 2 × 10-6 Torr for two days. Both crystals were then treated with 160 Torr of zeolitically dried bromine vapor at 24℃. Full-matrix least-squares refinements of toe first crystal(a: 12.250(1) A )· and the second crystal(a: 12.204(2) A ) have contecoed to final error indices, Rl:0.075 and Ra:0.079 with 212 reflections, and Rl : 0.089 and Ra = 0.078 with 128 reflections, respectively, for which I >3σ(I). Crystallographic analyses of both crystals show that six Cd2+ ions are located on two different threefold axes of unit cell associated with 6-ring oxygens. Each 4.5 Cd2+ ion is recessed ca.0. 441 A Into the large cavity to complex either with Brsor with Br3from the (111) plane of 0(3), whereas each 1.5 Cd2+ ions recessed ca. 0.678 A into we sodalite unit. Approximately 1.5 Br5-and 1.5 Br3-ions are sorbed per unit cell. Each Brsion interacts and stabilized by complexing with two Cd2+ ions and framework oxide ions, while each Br3ion interacts with one Cd2+ ion and framework oxide ions. Because of residual water molecules the following reactions may be occurred inside of zeolite cavity:

• Korean Journal of Medicinal Crop Science
• /
• v.10 no.3
• /
• pp.222-229
• /
• 2002

Ixeris dentata root were extracted with methanol and then fractionated with n-hexane, EtOAc and BuOH to get active fractions. and their antioxidant and antimicrobial activities in each fraction were determined. Ethyl acetate fraction of Ixeris dentata root showed strong antioxidant activities, but aqueous fraction did not show any activities. But in the antimicrobial test, aqueous fraction showed strong antimicrobial activities except to Escherichia coli. especially, aqueous fraction showed the strongest activities against Hypocrea nigricans. and butanol fraction showed the strongest activities against Cladosporium herbarum. This study was performed to determine the antimutagenic and cytotoxic effect of Ixeris dentata root methanol extract on Salmonella typhimurium TA98, TA100 and cancer cell lines using ames test and cytotoxicity assay, respectively. Cancer cell lines include human lung carcinoma(A549), human breast adenocarcinoma(MCF-7) and human hepatocellular carcinoma (Hep 3B). Futher fractionations with hexane, ethyl acetate, butanol and water from methanol extract of Ixeris dentata root were performed to obtain effective fraction, methanol extracts showed 79.94% inhibitory effect on the mutagenesis induced by N' -methyl- N' -nitro-N-nitrosoguanidine(MNNG) against TA100, while 89.99% inhibition was observed on the mutagenesis induced by 4-nitroquinoline-1-oxide(4NQO) against TA98. In the meanwhile, butanol fraction showed 89.92% and 71.01% inhibitory effect on the mutagenesis induced by benzo(a)pyrene(B(a)P) against TA98 and TA100, respectively. Ethyl acetate fraction showed the strongest effect against A549, MCF-7 and Hep3B at the same concentration compared to those of other fration.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.3
• /
• pp.282-291
• /
• 1994

Optimal processing conditions and shelf-life of steamed kamaboko made from Alaska pollock surimi were investigated, including protein digestibility, computed protein efficiency ratio (C-PER), trypsin inhibitor content and protein solubility. Steamed kamaboko containing $5\%$ starch and $33\%$ water in pollock surimi showed the best protein quality in terms of C-PER and protein digestibility. Steaming could not give any significant advantage over kamaboko protein digestibility but a higher C-PER resulted from steamed kamaboko. All kamaboko products had trypsin content of 1.4 to $2.0mg\%$ which was $10\%$ of total trypsin inhibitor levels in frozen pollock meat. A two stage steaming process, the first at $40^{\circ}C$ for 20min followed by a second 10min steaming period at $95^{\circ}C$, was found to be the most effective way of the most effective heating process for kamaboko protein quality. C-PERs of marketed Korean surimi products ranged from $2.8{\sim}2.9$ for steamed kamaboko and $2.9{\sim}3.2$ for crab meat analog which were superior to ANRC casein(2.5). Measured protein digestibility of all products were ranged from 86 to $89\%$. VBN and protein solubility data suggest Korean marketed surimi products could have a shelf-life of 15 days at $4^{\circ}C$ for crab meat analog and 20 days at $4^{\circ}C$ for steamed kamaboko.

• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.82-89
• /
• 2013

Harvest is one of the major disturbances affecting the soil carbon (C) dynamics in forests. However, researches on the long-term impact of periodic harvest on the soil C dynamics are limited since they requires rigorous control of various factors. Therefore, we adopted a modeling approach to determine the long-term impacts of harvest interval, harvest intensity and post-harvest residue management on soil C dynamics by using the Korean Forest Soil Carbon model (KFSC model). The simulation was conducted on Pinus densiflora S. et Z. stands in central Korea, and twelve harvest scenarios were tested by altering harvest intervals (50, 80, and 100-year interval), intensities (partial-cut harvest: 30% and clear-cut harvest: 100% of stand volume), and the residue managements after harvest (collection: 0% and retention: 100% of aboveground residue). We simulated the soil carbon stock for 400 years for each scenario. As a result, the soil C stocks in depth of 30 cm after 400 years range from 50.3 to 55.8 Mg C $ha^{-1}$, corresponding to 98.1 to 108.9% of the C stock at present. The soil C stock under the scenarios with residue retention was 2.5-11.0% higher than that under scenarios with residue collection. However, there was no significant impact of harvest interval and intensity on the soil C stock. The soil C dynamics depended on the dead organic matter dynamics derived from the amount of dead organic matter and growth pattern after harvest.

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.34-39
• /
• 2018

This research was conducted to estimate moisture content in cucurbitaceae seedlings, such as cucumber and watermelon, using hyperspectral imagery. Using a hyperspectral image acquisition system, the reflectance of leaf area of cucumber and watermelon seedlings was calculated after providing water stress. Then, moisture content in each seedling was measured by using a dry oven. Finally, using reflectance and moisture content, the moisture content estimation models were developed by PLSR analysis. After developing the estimation models, performance of the cucumber showed 0.73 of $R^2$, 1.45% of RMSE, and 1.58% of RE. Performance of the watermelon showed 0.66 of $R^2$, 1.06% of RMSE, and 1.14% of RE. The model performed slightly better after removing one sample from cucumber seedlings as outlier and unnecessary. Hence, the performance of new model for cucumber seedlings showed 0.79 of $R^2$, 1.10% of RMSE, and 1.20% of RE. The model performance combined with all samples showed 0.67 of $R^2$, 1.26% of RMSE, and 1.36% of RE. The model of cucumber showed better performance than the model of watermelon. This is because variables of cucumber are consisted of widely distributed variation, and it affected the performance. Further, accuracy and precision of the cucumber model were increased when an insignificant sample was eliminated from the dataset. Finally, it is considered that both models can be significantly used to estimate moisture content, as gradients of trend line are almost same and intersected. It is considered that the accuracy and precision of the estimating models possibly can be improved, if the models are constructed by using variables with widely distributed variation. The improved models will be utilized as the basis for developing low-priced sensors.

• Progress in Medical Physics
• /
• v.11 no.1
• /
• pp.59-71
• /
• 2000

It is possible to obtain a fast CT scan during breath holding with spiral technique. But the risk of radiation is increased due to detailed and repeated scans. However, the limitation of X-ray doses is not fully specified on CT, yet. Therefore, the purpose of the present study is to define the limitation of X-ray doses on CT The CT unit was somatom plus 4. Alderson Rando phantom, Solenoid water phantom, TLD, and reader were used. For determining adequate position and size of organs, the measurement of distance(${\pm}$2mm) from the midline of vertebral body was performed in 40 women(20~40 years). On the brain scan for 8:8(8mm slice thickness, 8mm/sec movement velocity of the table) and 10:10(10mm slice thickness, 10mm/sec movement velocity of the table) methods, the absorption doses of exposed area of the 10:10 were slightly higher than those of 8:8. The doses of unexposed uterus were negligible on the brain scan for both 8:8 and 10:10. On the chest scan for 8:8, 8:10(8mm slice thickness, 10mm/sec movement velocity of the table), 10:10, 10:12(10mm slice thickness, 12mm/sec movement velocity of the table) and 10:15(10mm slice thickness, 15mm/sec movement velocity of the table) methods, 8:8 method of the absorption doses of exposure area was the most highest and 10:15 method was the most lowest. The absorption doses of 8:10 method was relatively lower than those of the other methods. In conclusion, the 8:10 method is the most suitable to give a low radiation burden to patient without distorting image quality.

• Progress in Medical Physics
• /
• v.21 no.1
• /
• pp.86-92
• /
• 2010

The purpose of this study was to measure curvature contour skin dose using radiochromic film and TLD for a conventional open field. We also attempted to quantify the degradation of skin sparing associated with use of immobilization devices for high energy photon beams and to calculate the skin dose with a help of Monte Carlo (MC) simulation. To simulate head-and-neck and shoulder treatment, a cylindrical solid water phantom 11 cm in diameter was irradiated with 6 MV x-rays using $40{\times}40\;cm^2$ field at 100 cm source axis distance (SAD) to the center of the phantom. Aquaplastic mesh mask was placed on the surface of the cylindrical phantom that mimicked relevant clinical situations. The skin dose profile was obtained by taking measurements from $0^{\circ}$ to $360^{\circ}$ around the circumference of the cylindrical phantom. The skin doses obtained from radiochromic film were found to be 47% of the maximum dose of $D_{max}$ at the $0^{\circ}$ beam entry position and 61% at the $90^{\circ}$ oblique beam position without the mask. Using the mask (1.5 mm), the skin dose received was 59% at $0^{\circ}$ incidence and 78% at $80^{\circ}$ incidence. Skin dose results were also gathered using thin thermoluminescent dosimeters (TLD). With the mask, the skin dose was 66% at $0^{\circ}$ incidence and 80% at $80^{\circ}$ incidence. This method with the mask revealed the similar pattern as film measurement. For the treatments of the head-and-neck and shoulder regions in which immobilization mask was used, skin doses at around tangential angle were nearly the same as the prescription dose. When a sloping skin contour is encountered, skin doses may be abated using thinner and more perforated immoblization devices which should still maintain immoblization.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.2
• /
• pp.131-146
• /
• 2014

High-resolution seismic profiles coupled with sediment sampling were analyzed to investigate the acoustic characters and distribution patterns of the late Holocene sediments in Gamak Bay of the South Sea, Korea. The mean grain size of surficial sediment lies around $6.3{\sim}9.7{\Phi}$. Sediments in the bay consist of silt and clay with progressive decrease toward the inner bay. The seismic sedimentary sequence overlying the acoustic basement can be divided into two sedimentary units (GB I and II) by a prominent mid-reflector (Maximum Flooding Surface; MFS). The acoustic basement occurs at the depth between 20 m and 40 m below the sea-level and deepens gradually southward. The GB I, mostly occupying the channel-fill, is characterized by reflection-free seismic facies. It can be formed as late Transgressive System Tract (TST), interpreted tidal environment deposits. MFS appears at the depth of about 15~28 m below the sea-level and is well defined by even and continuous reflectors on the seismic profile. The GB II overlying MFS is composed of acoustically transparent to semitransparent and parallel internal reflectors. GB II is interpreted as the Highstand System Tract (HST) probably deposited during the last 6,000 yrs when the sea level was close to the present level. Especially, it is though that the GB II was subdivided into two layers (GB II-a and II-b) by a HST-reflector and this was classified by wind, sea water flux, and tidal current.