• Food Science and Preservation
• /
• v.23 no.2
• /
• pp.259-266
• /
• 2016

Bitter melon powder (BMP) was used in the preparation of rice nuruk (RN) and makgeolli as one of raw materials. RN containing BMP (BMP-RN) was prepared by adding 0~2.0% (w/w) BMP into rice. Fermentative microbial, and antioxidant characteristics of makgeolli were determined during the fermentation process. pH during fermentation decreased from 4.52 (0% BMP-RN), 4.93 (0.5%), 4.80 (1.0%), and 4.88 (2.0%) on the initial fermentation day (day 0) to 4.15, 4.30, 4.57, and 4.59, respectively, corresponding to increases in acidity from 0.64~0.70% to 1.17~1.28%, respectively. Soluble solid contents increased from an initial 2.2~4.4 g/L (day 0) to 9.0~9.3 g/L, and alcohol level increased up to 13.0% by the end of fermentation (day 7). Soluble phenolic contents increased from 0.92, 1.01, 1.32, and 1.41 mg/mL on day 0, to 1.85, 2.03, 2.24, and 2.48 mg/mL on day 7, respectively, while the levels of 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) diammonium salt (ABTS) radical scavenging activities and ferric reducing/antioxidant power (FRAP) assay increased from 46.95~70.04%, 55.33~74.13%, and 0.629~1.243 on day 0, respectively, to 54.98~83.4%, 70.34~92.39%, and 0.964~1.455 on day 7, respectively. Makgeolli made with BMP-RN had higher soluble phenolic contents and antioxidant activity than those of makgeolli made without BMP-RN. These results suggested that BNP-RN made a functional makgeolli.

• Food Science and Preservation
• /
• v.16 no.3
• /
• pp.405-411
• /
• 2009

The manufacturing process and quality properties of Lactococcus lactis-fermented yakchobugak (LFY) containing some colored agro-food products were investigated to develop a good organoleptic bugak from the leaf of the medicinal herb. The de-oiling rate of LFY by centrifugation was 37.6%, which was significantly different to the 3.5% value obtained after standing and the 8.9% value obtained with the beating method (p<0.05). Reducing power (RS) increased with addition of increasing levels of ethanol extracts from agro-food powders. The RS of green tea extract-supplemented LFY had the highest value of 0.97 at $500{\mu}g/mL$, and this was significantly different to values obtained using other extracts (p<0.05). At 83.84%, the DPPH (2,2-diphenyl-1-picrylhydrazyl) free-radical scavenging activity of green tea extract-supplemented LFY was the greatest of all samples tested, followed by LFY with woolgeom at 39.48%, LFY with black rice at 28.45%, and LFY with bokbunja at 22.24% all ethanol extracts were added at $50{\mu}g/mL$ (p<0.05). Acid values of green tea and bokbunja LFYs stored in transparent PE bags at $60^{\circ}C$ for 7 days were 1.82% and 2.03%, respectively. Textural hardness values of LFYs were less than 250.62, except for LFYs with black rice and woolgeom, but these values increased $2{\sim}3$-fold after lactic acid fermentation. Carbohydrate and protein content of LFYs were in the ranges $58.95{\sim}64.63%$ and $7.50{\sim}8.68%$, respectively. Lipid and calorie contents of woolgeom LFY had the lowest values of 22.02% and 490 Kcal, respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.2 s.31
• /
• pp.59-66
• /
• 2004

This paper presents a novel fabrication process for a tapered hollow metallic microneedle array using backside exposure of SU-8, and analytic solutions of critical buckling of a tapered hollow microneedle. An SU-8 meta was formed on a Pyrex glass substrate and another SU-8 layer, which was spun on top of the SU-8 mesa, was exposed through the backside of the glass substrate. An array of SU-8 tapered pillar structures. with angles in the range of $3.1^{\circ}{\sim}5^{\circ}$ was formed on top of the SU-8 mesa. Conformal electrodeposition of metal was carried out followed by a mechanical polishing using a pianarizing polymeric layer. All organic layers were then removed to create a metallic hollow microneedle array with a fluidic reservoir on the backside. Both $200{\mu}m\;and\;400{\mu}m$ tall, 10 by 10 arrays of metallic microneedles with inner diameters of the tip in the range of $33.6{\sim}101\;{\mu}m$ and wall thickness of $10{\mu}m\;-\;20{\mu}m$ were fabricated. Analytic solutions of the critical buckling of arbitrary-angled truncated cone-shaped columns are also presented. It was found that a single $400{\mu}m$ tall hollow cylindrical microneedle made of electroplated nickel with a wall thickness of $20{\mu}m$, a tapered angle of $3.08^{\circ}$ and a tip inner diameter of $33.6{\mu}m$ has a critical buckling force of 1.8 N. This analytic solution can be used for square or rectangular cross-sectioned column structures with proper modifications.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.4
• /
• pp.381-388
• /
• 2017

Purpose: Unpredictable shrinkage of zirconia during sintering process causes discrepancy. Therefore, there have been attempts to reduce discrepancy by milling zirconia after sintering. However, due to the hardness of sintered zirconia, milling takes longer time, causes damage to the machine and causes chip formation. With customized zirconia block using the mean dimension of prepared natural dentition, it is expected to overcome these shortcomings. Materials and methods: The mean dimension of prepared natural dentition was analyzed as STL file after scanning of prepared teeth treated at SNUDH. The transverse, frontal and sagittal planes were set using Mimics and Photoshop. 3D volume was projected on each plane, and the outer line was measured through external tangent line, and the inner line was measured through inflection point of tangent line. Results: The mean height of prepared incisal (N = 57) is $6.60{\pm}1.05mm$, mesiodistal length is $2.98{\pm}0.73mm$, buccolingual length is $2.04{\pm}0.73mm$. The mean height of prepared premolar (N = 15) is $5.37{\pm}1.49mm$, mesiodistal length is $4.10{\pm}1.78mm$, buccolingual length is $5.86{\pm}1.55mm$. And the mean height of prepared molar (N = 13) is $5.11{\pm}1.29mm$, mesiodistal length is $6.80{\pm}1.18mm$, buccolingual length is $7.34{\pm}1.40mm$. Conclusion: Using the mean dimension of prepared natural dentition, it is expected to be able to fabricate customized zirconia block.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.3
• /
• pp.80-86
• /
• 2016

High Ni content layered oxide materials for the positive electrode in lithium-ion batteries have high specific capacity. However, their poor electrochemical and thermal stability at elevated temperature restrict the practical use. A small amount of $Al_2O_3$ was added to the mixture of transition metal hydroxide and lithium hydroxide. The $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ was simultaneously doped and coated with $Al_2O_3$ during heat-treatment. Electrochemical characteristics of modified $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ were evaluated by the galvanostatic cycling and the LSTA(linear sweep thermmametry) at the constant voltage conditions. The nano-sized $Al_2O_3$ added materials show better cycle performance at elevated temperature than that of micro-sized $Al_2O_3$. As the added amount of nano-$Al_2O_3$ increased, the thermal stability of electrode also enhanced, but the use of 2.5 mol% Al showed the best high temperature performance.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.9
• /
• pp.1258-1264
• /
• 2009

The removal effects of two commonly used pesticides of Bifenthrin and Metalaxyl during preparation and fermentation of kimchi were studied. The two pesticides were applied to Baechu cabbages intentionally for 20 seconds; the applied amounts of Bifenthrin and Metalaxyl were 3.02$\pm$0.09 ppm and 6.79$\pm$0.17 ppm, respectively. The Baechu cabbages were washed by water 3 times. Then the residual amounts of the two pesticides of Bifenthrin and Metalaxyl were measured and the removal rates were 21.7% and 16.1%, respectively. When Baechu cabbages were brined with 10% salt solution for 12 hours after the application of the two pesticides, the removal rates significantly increased to 98.7% and 60.8%, and when brined and washed 3 times by water, the removal rates even more increased to 99.7% and 73.4% respectively. Then we made kimchi and investigated the quantities of the residual pesticides during the fermentation at $4^{\circ}C$ for 3 weeks. The residual amounts of the pesticides in kimchi decreased in a time dependent manner, finally the amounts of the pesticides to 0.35$\pm$0.04 ppm and 0.48$\pm$0.06 ppm while the removal rates of the two pesticides were 57.8% and 81.0%, respectively. When the kimchi was fermented at $4^{\circ}C$ and $10^{\circ}C$ for 3 weeks, the removal rates of Bifenthrin were 57.8% and 72.2% and those of Metalaxyl were 81.0% and 85.6%, respectively. Consequently, it appeared that the residual pesticides can be removed during preparation, especially brining; the fermentation process of kimchi also removed the residual pesticides effectively, especially at higher temperature and long period.

• The Korean Society of Law and Medicine
• /
• v.20 no.1
• /
• pp.163-201
• /
• 2019

Doctor has the duty of an inter-hospital transfer, known as inter-facility or secondary transfer, when the diagnostic and therapeutic facilities required for a patient are not available at the given hospital. Also, the decision to transfer the patient to an another facility is rely on whether ill patient is the benefits of care, including clinical and non-clinical reasons, available at the another facility against the potential risks. Crucial point to note is that issues about 'inter-hospital transfer' is limited to questions occurred in the course of transfer between emergency medicals (facilities). 'emergency medical (facility)' is specified by Medical Law, article 3 and the duty of an inter-hospital transfer includes any possible adverse events, medical or technical, during the transfer. Because each medical facility has an different ability to care for a patient in an emergency condition, coordination between the referring and receiving hospitals' emergency medicals would be important to ensure prompt transfer to the definitive destination avoiding delay at an emergency. Simultaneously, transfer of documents about the transfer process, medical record and investigation reports are important materials for maintaining continuity of medical care. Although the duty of an inter-hospital transfer is recognized as one of duty of doctor and more often than not it occurs, there is constant legal conflict between a doctor and a patient related to the duty of the inter-hospital transfer. Therefore, we need clear and specific legal standard about the inter-hospital transfer. This paper attempts to review the Supreme Court's cases associated to the inter-hospital transfer and to compare opinion of the cases with guideline for an inter-hospital transfer already given. Furthermore, this article is intended to broaden our horizons of understanding the duty of an inter-hospital transfer and I wish this article helps to resolve the settlement and case dealt with the duty of inter-hospital transfer.

• Journal of Korean Society of Archives and Records Management
• /
• v.1 no.1
• /
• pp.95-129
• /
• 2001

The treatise is a follow-up thesis of "The Archival Management : destination of its education" published by The Research Institute for Korean Archives and Records in June 17, 2000, and it was written to secure its original temper of the "Archival Management" which has established at first as the domestic collegiate educational course. Presently, we are mixed up for interpretation of terminology by facing unfamiliar words: such as, Archives, Documents, Manuscripts, Records / Archival Management, Archival Preservation / Archivist, Archival Conservator, Manuscripts Curator and Record Manager. Also, tile treatise has confirmed scholars' various opinion about its education and curriculum not only domestic but overseas scholars, and examined realities and course of studies of 4 overseas countries, and also have purpose to pursue domestic universities' actual condition of curriculum and its reform measure. And since dispositon of Archivist and the professional organization of the Archivist was based on the Laws, therefore, establishment of an educational institution for Archival Management from now on will be expanded more and need to be accelerated. Accordingly, the universities that already established or to be established from now on, shall be needed educational quality and its contents to be ascended. Its concrete plan is as follows : (1) Now, disarranged archive and record words, and to make publish 'Glossary of Archives & Records' as soon as possible. (2) Remind the substance of the Record and Archival Management and its sphere again and need to be considered alteration of the studies' name. (3) There needs to establish the role and establishment of conception of Archivists. (4) Refer to the theory and practical educational method of overseas professional Archivist Scholars, but to be needed to develop the curriculum which is accorded with am tradition and way of thinking. (5) Confer for development of teaching materials and educational method jointly through 'Academic Society', and there needs reorganize the subject which is fit for each university's characteristics. (6) Recently, "Cultural Resources Studies" for research specialization which has established in Graduate School of Tokyo University was very useful to us. We also need to be considered such establishment of process.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.3
• /
• pp.486-493
• /
• 2008

Safflower red colorants extracted by two solvents including the traditional ash solution and $K_{2}CO_{3}$ solution was used for dyeing cotton, ramie, viscose rayon, silk, wool, and nylon fabrics. The effects of extraction solvents on the reflectance, K/S value, and color properties of the dyed fabrics were investigated. Wash/dry cleaning and light colorfastness were evaluated. Reflectance curves of cotton, ramie, viscose rayon, and silk fabrics dyed with red colorants extracted by $K_{2}CO_{3}$ solution were similar, showing the maximum absorption at 520nm, to that of the dyed fabrics with red colorants extracted by ash solution. The reflectance curves of wool and nylon fabrics were different, showing the maximum absorption at 400nm. K/S values of dyed fabrics with red colorants extracted by $K_{2}CO_{3}$ solution were higher than that by ash solution with the exception of nylon. $L^{*},\;a^{*},\;b^{*}$, and $C^{*}$ of the dyed fabrics with red colorants extracted by $K_{2}CO_{3}$ solution were higher than that by ash solution except for $L^{*}$ of nylon and $b^{*}$ of viscose rayon. Color difference(${{\Delta}E}^*$) of the dyed fabrics between ash solution and $K_{2}CO_{3}$ solution increased in the order named as cotton, silk, ramie, viscose rayon, wool, and nylon. Regardless of extraction solvents, safflower red colorants produced RP color on cotton, ramie, and nylon, R color on viscose rayon and silk, and YR color on wool. Wash/dry cleaning fastness of the dyed fabrics was high above 3/4 rating but light fastness was very poor. It is considered that the use of $K_{2}CO_{3}$ solution instead of the traditional ash solution would be more effective in terms of color reproducibility and extraction process.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.103-109
• /
• 2016

Polyethylene pipes has useful benefits which are anti-corrosive and flexible material, so it is used to gas pipes but also class 3 water pipes of nuclear power plant, process pipes of petrochemical plant and chemical plant. So the usage of polyethylene pipes is widely increased. But it has been limited for the usage of polyethylene, because it can not be directly detected to fusion joints by using non destructive evaluation. Polyethylene pipes are connected by two methods, one is butt fusion and the other is electrofusion. Butt fusion is widely used to connecting the pipes. It is proposed to method for determining the reliability of joints in this study that is detection of the melt flow zone at fusion joints. In this study, middle density polyethylene is used, outside diameter of the test specimen is 225mm and thickness is 20.5mm. Speed of ultrasonic of this test specimen is 2,200m/s. Test specimens were fabricated by varying the heating time which means from 0% to 130% applying time through heating plate to polyethylene for detecting melt flow zone. Also 4 additional test specimens were made, one was made that not scrapping attached surface of pipes but applying 100% of the proper heating time and the others were made to include of soil, gravel and vinly tape paper at fusion joints, that were also applied 100% of proper heating time. Ultrasonic testing to measure the melt flow zone of 20 test specimens was conducted by using 3.5MHz and 5.0MHz ultrasonic probes and melt flow zone measuring was conducted to three times at different point to one specimen. To differentiate the melt flow zone signal, post image processing was equally conducted to all test results and image levels, contrast, sharpen, threshold were adopted to all teat results and the test results were displayed gray scale. From the results, for the shorter heating times the reflection area of multiple echo have been increased, so the data was obtained from the position where it can be eliminated as much as possible. At 80% of proper heating time(168 sec.), the signal of melt flow zone was obtained clearly, so measuring could be conducted. From 7% of proper heating time(15 sec.) to shorter heating times. we could not obtain the signal because test specimen was not fused. From the result, we can verify that measuring of melt flow zone by using phased array ultrasonic imaging method is possible. And we can verify to complete and incomplete butt fusion by measuring the melt flow zone.