• Journal of Practical Agriculture & Fisheries Research
• /
• v.3 no.1
• /
• pp.116-131
• /
• 2001

Experiments were conducted to determine effects of whole and processed corns on in situ disappearance rates of nutrients in the rumen and in vitro degradability of dry matter by rumen microorganisms. Whole corn(WC) was processed into four different types; ground corn(GC), cracked corn(CC), flaked corn(FC), and soaked corn(SC). In the in situ experiment, the rate of ruminal DM disappearance after 48 hour incubation was highest in GC(76.1%) and lowest in WC and SC(12% ; P<0.01). The rate of ruminal CP disappearance after 48 hour incubation was highest in GC and CC(48 and 38%, respectively; P<0.01). The rate of ruminal OM disappearance after 48 hour incubation was highest in GC(76.14%) and lowest in WC and SC(11.82 and 12.26%, respectively; P<0.01). In the in vitro experiment, the two-stage incubation technique was used to measure digestibilities of whole and processed corns. The digestibility of DM was higher in GC, CC and FC(86.95, 85.84 and 82.29%, respectively) than in WC(15.36%; P<0.01).

• Tunnel and Underground Space
• /
• v.19 no.6
• /
• pp.567-582
• /
• 2009

The world's largest nucleon decay experiment facility is constructed at a depth of approximately 1,000meters, in the Kamioka mine, Japan. Because of the character as a large cavern in deep underground, in-situ stress measurements were conducted to provide basic information for design of the cavern. Three overcoring methods were used: 8-element embedding gauges developed by Japanese Central Research Institute of Electric Power Industry, hemispherical ended borehole technique with eight strain cross-gauges, and Hollow Inclusion Cell with 12 strain gauges. The principle stresses were not perfectly similar in each measurement. The average values of the 6 stress element were used to provide the direction and the magnitude of three principle stress.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.11
• /
• pp.587-595
• /
• 2015

In this study, fault symptoms were simulated and analyzed for a single-effect absorption chiller. The fault patterns of fault detection parameters were tabulated using the fault symptom simulation results. Fault detection and diagnosis by a process history-based method were performed for the in-situ experiment of a single-effect absorption chiller. Simulated fault modes for the in-situ experimental study are the decreases in cooling water and chilled water mass flow rates. Five no-fault reference models for fault detection of a single-effect absorption chiller were developed using fault-free steady-state data. A sensitivity analysis of fault detection using the normalized distance method was carried out with respect to fault progress. When mass flow rates of the cooling and chilled water decrease by more than 19.3% and 17.8%, respectively, the fault can be detected using the normalized distance method, and COP reductions are 6.8% and 4.7%, respectively, compared with normal operation performance. The pattern recognition method for fault diagnosis of a single-effect absorption chiller was found to indicate each failure mode accurately.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.2
• /
• pp.365-373
• /
• 2008

When the wind power system is planned to construct, it is important to understand the physical, chemical and mechanical properties of sediment. Especially, If it is the seabed unconsolidated sediment, we need to experiment on sediment through seabed unconsolidated sediment test and sediment survey. Because the sediment's properties are different as its formation, accumulation and load, unconsolidated sediment is difficult to be expected to its behavior. So we can estimate suitability for mechanical material and decrease the uncertainty through seabed unconsolidated sediment test. Seabed unconsolidated sediment test can be experimented in laboratory or in-situ as purpose, in-situ condition, economic problem. In this study, we sampled the seabed unconsolidated sediment at offshore around Korea Maritime University and measured properties of sediment through the laboratory test, showed the effect on physical properties of seabed unconsolidated sediment when the wind power system is planned to construction.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1481-1485
• /
• 2020

The creep behavior of Ni-Cr-W alloy at 950 ℃ has been investigated by a novel creep testing system which is capable of in-situ measurement of strain. Tubular specimens were pressurized with argon gas for effective stresses up to 32 MPa. Experimental results show that the thermal fatigue reduces the creep life of the tubular specimens and with the introduction of thermal cycling fatigue the primary stage disappears and the creep rate higher than the pure thermal creep (without thermal fatigue). Also the creep behavior of Ni-Cr-W alloy doesn't consist in the secondary stage. A new creep equation has been derived and implemented into finite element method. The results from the finite element analyses are in good agreement with the creep experiment.

• Journal of Hydrogen and New Energy
• /
• v.25 no.4
• /
• pp.386-392
• /
• 2014

The effective water management in a polymer electrolyte membrane fuel cell (PEMFC) is one of the key strategies for improving cell performance and durability. In this work, an ex situ measurement was carried out to understand the water droplet behavior on the surface of gas diffusion layer (GDL) as a fundamental study for establishing novel water management. For that purpose, simplified cell including one rib and two flow channels was designed and fabricated. Using this ex situ device, the water droplet emergence through the GDL of the PEMFC was emulated to understand liquid water transport through the porous diffusion medium. Through the visualization experiment, the emergence and growth of water droplets at the channel/GDL interface are mainly observed with the surface characteristics of GDL (SGL 10BA, 24BA) and rib when the liquid water passes through the GDL and is expelled to the flow channel. It is expected that the results obtained from this study can contribute to the better understanding on the water droplet behavior (emergence and removal) in the flow channels of PEMFC.

• Membrane and Water Treatment
• /
• v.13 no.2
• /
• pp.97-104
• /
• 2022

With a small particle size, specific surface area and chemical nature, Pd/Cu-Fe nanocomposites can efficiently remove the organic compounds. In order to understand the applicability for in situ remediation of contaminated groundwater, the degradation of p-nitrophenol by Pd/Cu-Fe nanoparticles was investigated. The degradation results demonstrated that these nanoparticles could effectively degrade p-nitrophenol and near 90% of degradation efficiency was achieved by Pd/Cu-Fe nanocomposites for 120 min treatment. The efficiency of degradation increased significantly when the Pd content increased from 0.05 wt.% and 0.10 wt.% to 0.20 wt.%. Meanwhile, the removal percentage of p-nitrophenol increased from 75.4% and 81.7% to 89.2% within 120 min. Studies on the kinetics of p-nitrophenol that reacts with Pd/Cu-Fe nanocomposites implied that their behaviors followed the pseudo-first-order kinetics. Furthermore, the batch experiment data suggested that some factors, including Pd/Cu-Fe availability, temperature, pH, different ions (SO42-, PO43-, NO3-) and humic acid content in water, also have significant impacts on p-nitrophenol degradation efficiency. The recyclability of the material was evaluated. The results showed that the Pd/Cu-Fe nanoparticles have good recycle performance, and after three cycles, the removal rate of p-nitrophenol is still more than 83%.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.144-147
• /
• 2004

Two different sensors (here, KOMPSAT and RADARSAT) are considered for ship detection, and are used to delineate the detection performance for their data. The experiments are set for coastal regions of Mokpo Port and Ulsan Port and field experiments on board pilot boat are conducted to collect in situ ship validation information such as ship type and length. This paper introduce mainly the experiment result of ship detection by both RADARSAT SAR imagery and landbased RADAR data, operated by the local Authority of South Korea, so called vessel traffic system (VTS) radar. Fine imagery of Ulsan Port was acquired on June 19, 2004 and in-situ data such as wind speed and direction, taking pictures of ships and natural features were obtained aboard a pilot ship. North winds, with a maximum speed of 3.1 m/s were recorded. Ship's position, size and shape and natural features of breakwaters, oil pipeline and alongside ship were compared using SAR and VTS. It is shown that KOMPSAT/EOC has a good performance in the detection of a moving ship at a speed of 7 kts or more an hour that ship and its wake can be imaged. The detection capability of RADARSAT doesn't matter how fast ship is running and depends on a ship itself, e.g. its material, length and type. Our results indicate that SAR can be applicable to automated ship detection for a VTS and SAR combination service.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.521-528
• /
• 2005

The evaluation process of rock mass properties intrinsically contains some uncertainty due to the inhomogeneity of rock mass and the measurement error. Although various empirical methods for the determination of rock mass properties were suggested, there is no way of integrating various information on rock mass properties except averaging. For these reasons, this research introduces evidence theory which can model epistemic uncertainty and yield reasonable rock mass properties through combining various information such as empirical equations, in-situ test results, and so on. Through the application of evidence theory to the real site investigation and in situ experiment results, an interval of deformation modulus, cohesion and friction angle of rock mass were obtained. The ratios between lower and upper bound of those properties ranges from 1.6 to 3.6. Numerical analyses of circular hole using the properties for TYPE-2 rock mass were carried out. The magnitude or size of plastic region and radial displacement in case of lower bound properties is about 4 times larger than that of upper bound properties.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.467-468
• /
• 2010

Over the past few decades, considerable numbers of studies on the durability of concrete have been carried out extensively. The majority of these researches have been performed on sound uncracked concrete, although most of in-situ concrete structures have more or less micro-cracks. It is only recent approach that the attention has shifted towards the influence of cracks and crack width on the penetration of chloride into concrete. The penetration of chlorides into concrete through the cracks can make a significant harmful effect on reinforcement corrosion. Author of this study examined the effect of cracks on chloride penetration by short term experiment. However, it is necessary to accomplish the effect by long term experiment to get reliable goal. In this study, the long term and short term experiments were carried out. This can be useful for establishing new species model of chloride penetration through cracks in concrete.