• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.418-421
• /
• 2003

In this thesis, a new channel estimation technique is proposed for orthogonal frequency division multiplexing (OFDM) over time varying channels. The channel estimation algorithm exploits the fact that the estimated channel impulse response (CIR) by using pilot signal is the average value of the CIR variation within an OFDM symbol period. With this fact, the CIR variation is simply estimated through lowpass interpolation of the CIRs of the adjacent OFDM symbols. For signal detection, a time domain equalizer is used in this thesis. Simulation results show that the proposed system improves the bit error rate (BER) over time varying channels.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1102-1107
• /
• 2000

The signals that can be obtained from a rotating machine often convey the information of machine. For example, if the machine under investigation has faults, then we can measure the signal which has a pulse train, embedded in noise. Therefore the ability to detect the fault signal in noise determines the degree of diagnosis level of rotating machine. In this paper, minimum variance cepstrum (MV cepstrum), which can easily detect impulse in noise, has been applied to detect the type of faults of ball bearing system. To test the performance of this technique, experiment has been performed for ball bearing elements that have man made faults. Results show that minimum variance cepstrum can easily detect the periodicity due to faults.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.317-320
• /
• 2001

Blind adaptive channel identification of communication channels is a problem of important current theoretical and practical concerns. Recently proposed solutions for this problem exploit the diversity induced by antenna array or time oversampling leading to the so-called, second order statistics techniques. And adaptive blind channel identification techniques based on a off-line least-squares approach have been proposed. In this paper, a new approach is proposed that is based on eigenvalue decomposition. And the eigenvector corresponding to the minimum eigenvalue of the covariance matrix of the received signals contains the channel impulse response. And we present a adaptive algorithm to solve this problem. The performance of the proposed technique is evaluated over real measured channel and is compared to existing algorithms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.441-443
• /
• 1995

A new optical-resistive voltage divider, which consists of light emitting diode, optic fiber, PIN-photo diode and a high qualify shielding resistive divider, whose total response time is 7.35 [ns], has been obtained. The optical to electrical signal converter was constructed with GaAsP series light emitting diode. The response characteristics have been verified by applying the Marx impulse voltage generator experimentally. Comparing with the performance of conventional resistive voltage divider, the characteristics of the proposed optical-resistive voltage divider are more excellent in step response and less sensitive to electromagnetic interference.

• 전기학회논문지P
• /
• 제60권1호
• /
• pp.19-26
• /
• 2011

In this paper, we designed Interpolation FIR(Finite Impulse Response) filter and 1-bit SDM(Sigma- Delta Modulator) for small digital audio speaker, which has low power consumption and high output characteristics. In order to achieve high linearity and low distortion performance of the systems, we adopt Type I Chevychev FIR filter which has equiripple characteristics in the pass band and proposed high efficient FIR filter structure. SDM is the most efficient modulation technique among the noise shaping techniques. In this paper, we implemented SDM using CIFB(Cascade of Intergrators, Feed-Back) which is generally used in DAC of small digital audio speakers. The proposed SDM structure can achieve high SNR, high-efficiency characteristics and low power consumption in mobile devices. Also considering manufacture of SoC(System on Chip), we performed simulation with Matlab and Verilog HDL to obtain optimal number of operational bits and verified a good experimental results.

• 전기학회논문지
• /
• 제56권12호
• /
• pp.2091-2097
• /
• 2007

This paper described the verification of modeling technique of underground distribution from comparison between field test and simulation. It needs more exact transient phenomenon analysis model to establish lightning protection of underground distribution line. Although, there were a lot of transient phenomenon researches, nobody could has verified the confidence of modeling from field tests in interior until now. So, simulation model verified field test is needed to analyse transient phenomenon of underground distribution system. The examination must be accomplished in many different condition before suggesting these verified analysis model. In this paper, the conditions were examined and the various data results on the different line composition was compared with the EMTP simulation, when the lightning impulse test was accomplished at underground distribution line. Also the value between field test and simulation was very closed and the method of modeling has demonstrated confidence, when the method is used to analyse domestic transient phenomenon of underground distribution.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 1998년도 가을 학술발표논문집 Vol.25 No.2 (2)
• /
• pp.467-468
• /
• 1998

Impulsive noise appears as black and/or white spots in an image. It is usually caused by errors during the image acquisition or transmission through communication channels. This paper presents a study on the impulsive noise reduction filter of digital image. A much more effective method for removing impulse noise is weighted median filtering. But it loses some information by changing center value with no condition. We propose some new technique to change center value with some conditions. In this paper, the performance of conditional weighted median filter is compared to the commonly used median filter, mean filter, max/min filter, and weighted median filter. A quantitative comparison is performed on MSE (Mean Square Error), RMSE (Root Mean Square Error), and SNR (Signal to Noise Ratio). Proposed conditional weighted median filter can yield better performance than regular filters.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권3호
• /
• pp.45-49
• /
• 2007

A gearing system emits inconsistent noises from the impact of gear teeth when defects are present, but it is not easy for a noise inspector on a production line to distinguish defective products objectively. Since customers constantly complain about various noises from geared motors, it is desirable to devise an analytical technique to classify motors. However, it is difficult to separate inconsistent noises due to defective gears from the overall noise produced by a geared motor using a general signal processing method such as a FFT because low frequency impulse signals have a tendency not to appear in the frequency domain. In this paper, we propose a method that can be used to obtain more objective estimates and measurements of inconsistent noises from a gearing system. The proposed method makes use of the cepstrum domain with an applied autocorrelation and comb lifter, followed by a domain inversion.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.484-485
• /
• 1987

The characteristics of leader development in rod -to- plane air gap (20cm gap length) under positive impulse potentials have been studied by means of 2-photomultiplier technique and image intensifier camera. It was shown that the streamers radiate relatively short wavelength light (${\sim}340nm$) while the leaders radiate a plenty of long wave length light ($400{\sim}800nm$). It was also known that the streamers propagate very fast with a velocity of $6{\times}l0^7cm/sec$ but the leaders have average velocity of $5{\times}10^6cm/sec$ and they proceed gradually fast by step-wise development.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2444-2446
• /
• 1999

In this paper, a fiber-optic voltage sensor for measurement of impulse voltage is implemented. A BSO single crystal is used as a Pockels cell. A new signal processing technique is adopted not only to avoid the influences of external perturbations of transmitting optical fiber, but to improve the frequency response characteristics of the optical voltage sensor. Experimental results show that proposed sensor has maximum ${\pm}$2.5% error rate, and has good frequency response.