• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.69-72
• /
• 1999

In this paper, an efficient time domain equalization algorithm for discrete wavelet multitone(DWMT) data transmission is developed. In this algorithm, the time domain equalizer(TEQ) consists of two stages, i.e., the channel impulse response shortening equalizer(TEQ-S) in the first stage and the channel frequency flattening equalizer(TEQ-F) in the second stage. TEQ-S reduces the length of transmission channel impulse response to decrease intersymbol interference(ISI) followed by TEQ-F that enhances the channel frequency response characteristics to the level of an ideal channel, hence diminishes the bit error rate. TEQ-S is implemented using the least-squares(LS) method, while TEQ-F is designed by using the least mean-square(LMS) algorithm. Since DWMT system also requires of the frequency domain equalizer in order to further reduce ICI and ISI the hardware complexity is an another concern. However, by adopting an well designed and trained TEQ, the hardware complexity of the whole DWMT system can be greatly reduced.

• 소음진동
• /
• 제9권3호
• /
• pp.587-592
• /
• 1999

Piston slap is one of the sources producing engine block surface vibration and mechanical noise. To analyze piston slap-induced vibration, a realistic but simple model is proposed and verified experimentally. A piston is modeled by 3 degree of freedom system and an impact point between piston skirt and cylinder wall by 2 degree of freedom system. Numerical simulation estimates impact forces of piston in cylinder, and the engine block surface vibration response is predicted by the convoluton of the impact forces with measured impulse responses. Experimental verification on the predicted response has been also performed by using a commercial 4-cylinder diesel engine. the predicted and experimental vibration responses confirm that the suggested model is practically useful.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.241-246
• /
• 2002

Usually vibration properties are obtained from frequency response functions or impulse response functions of a system. Since the contact type sensors can affect the characteristics of vibrating systems, the non-contact type sensors such as laser Doppler vibrometer (LDV) are being widely used. Currently researches are being carried out in terms of modal analysis using a scanning vibrometer. For the continuous scan; the Chebyshev demodulation (or polynomial) is apparently suggested to extract the mode shapes. With single frequency sinusoidal excitation, this approach is well fitted. In this research, the Chebyshev demodulation technique has been applied to the impact excitation case. The vibration of the tested structure is modeled using impulse response functions. The technique is also adopted to the random excitation case. In order to verify the technique, a simply supported beam was chosen as the test rig. The calculation modules are developed by using MATLAB$\^$(R)/ in WindowsNT$\^$(R)/ environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권9호
• /
• pp.2218-2230
• /
• 2012

In this paper, we propose an efficient channel delay estimation method for orthogonal frequency-division multiplexing (OFDM) systems, especially over doubly-selective fading channels which are selective in both the symbol time domain and subcarrier frequency domain. For the doubly-selective fading channels in single frequency network (SFN), long and strong echoes exist and thus the conventional discrete Fourier Transform (DFT) based channel delay estimation system often fails to produce the exact channel delay profile. Based on the analysis of the discrete-time frequency response of the channel impulse response (CIR) coefficients in the DFT-based channel delay estimation system, we develop a method to effectively extract the true CIR from the aliased signals by employing a simple narrow-band low-pass filter (NB-LPF). The performance of the proposed system is verified using the COST207 TU6 SFN channel model.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.325-326
• /
• 2007

SAW filter was designed by optimization technique using impulse sampling. To carry out characteristics of SAW filter the uniform IDT was adapted. And SAW filter was fabricated on $LiNbO_3$ substrates to evaluate frequency response. To apply properties of photolithography, lift off method was used. Lift off method was superior to etch method in fabrication process, frequency response property was measured by network analyzer. From a measurement of acoustic property, SAW propagation velocity was 2663.5m/sec.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.120-126
• /
• 2020

본 연구에서는 인체의 임펄스 응답 신호를 이용하여 사용자를 인식하는 방법을 제안한다. 인체는 물, 근육, 지방, 뼈 등으로 구성되어 있고, 이러한 구성비는 사람마다 다르게 형성되어 있다. 기존의 인체 통신 연구에서는 인체가 커패시터와 저항으로 이루어진 회로로 모델링 되었고, 회로의 특징은 인체의 구성 특성에 따라 다르다는 것이 밝혀졌다. 따라서 인체는 개인별 고유한 채널로 인식될 수 있고, 이를 이용한 사용자 인식이 가능하다는 연구가 보고 되었다. 이 연구에서는, 임펄스 신호를 인체에 인가하여 임펄스 응답 신호를 측정하고, empirical mode decomposition 기법으로 노이즈를 제거한다. 그리고 10개의 피크 값을 추출하고 피크 간 값의 차이를 특징량으로 사용하여 사용자 인증을 수행하였다. 6명의 참가자로부터 수집한 데이터를 k-nearest neighbors(KNN) 알고리즘을 사용하여 분류 성능을 확인한 결과, 임펄스 응답 신호의 전체 시계열 데이터의 분류 정확도는 91.57%이었으나, 제안한 피크 간 값의 차이를 특징량으로 하여 분류를 하였을 때 분류 정확도가 97.71%로 크게 향상되는 것을 확인할 수 있었다.

• 지구물리와물리탐사
• /
• 제12권4호
• /
• pp.338-346
• /
• 2009

콘크리트의 배면에 위치하는 공동을 탐지하기 위해 실제 구조물과 같은 스케일의 모형을 제작하여 비파괴 검사로 널리 사용되는 GPR (ground penetrating radar)탐사와 충격반향기법(IE; impact echo), 충격응답기법(IR; impulse response)을 복합적으로 적용하였다. 콘크리트 모형은 철근 및 공동의 유무에 따라 다양한 반응을 관찰할 수 있도록 설계 하였다. GPR 탐사결과 공동의 유무에 따라 반응의 차이가 나타났지만 정확하게 공동의 존재를 파악하기 어려웠으며, 주로 건전도 측정을 위해 지반조사에 활용되었던 IE 및 IR 기법은 공동의 유무를 구분할 수 있는 반응을 보여주었다. 각 탐사의 적용 결과 철근의 존재에 따라 각 방법별로 배면의 공동을 탐지하는데 반응의 변화가 나타나긴 했지만, 세 가지 방법을 복합적으로 적용하였을 때 단일 탐사를 이용한 결과보다 정확하게 배면 공동의 위치를 파악할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.955-960
• /
• 2008

In this paper, an impulse of an industrial chop Saw is identified by experimental method and the impulse is reduced by structural modification. For the impulse identification, vibration signals are measured by an accelerometer when the chop saw is operating. From some experiments, it is found that the impulse occurs when there is slip between spindle and the wheelwasher and contact area is small between the wheelwasher and cutting discs. The design of the wheelwasher for optimization is performed by the FEM and experiments and the prototype is manufactured. It is verified that considerable amount of impulses are reduced by the structural modification.

• 한국도로학회논문집
• /
• 제19권5호
• /
• pp.69-75
• /
• 2017

PURPOSES : The purpose of this study is to evaluate different types of Ground Penetrating Radar (GPR) testing for characterizing the road cavity detection. The impulse and step-frequency-type GPR tests were conducted on a full-scale testbed with an artificial void installation. After analyzing the response signals of GPR tests for detecting the road cavity, the characteristics of each GPR response was evaluated for a suitable selection of GPR tests. METHODS : Two different types of GPR tests were performed to estimate the limitation and accuracy for detecting the cavities underneath the asphalt pavement. The GPR signal responses were obtained from the testbed with different cavity sizes and depths. The detection limitation was identified by a signal penetration depth at a given cavity for impulse and step-frequency-type GPR testing. The unique signal characteristics was also observed at cavity sections. RESULTS : The impulse-type GPR detected the 500-mm length of cavity at a depth of 1.0 m, and the step-frequency-type GPR detected the cavity up to 1.5 m. This indicates that the detection capacity of the step-frequency type is better than the impulse type. The step-frequency GPR testing also can reflect the howling phenomena that can more accurately determine the cavity. CONCLUSIONS :It is found from this study that the step-frequency GPR testing is more suitable for the road cavity detection of asphalt pavement. The use of step-frequency GPR testing shows a distinct image at the cavity occurrences.

• 한국지능시스템학회논문지
• /
• 제16권5호
• /
• pp.537-543
• /
• 2006

최근들어 강우-유출 현상에 관한 비선형 모델링에 관하여 많은 연구가 있어 왔는데, 그 중에서도 신경망을 이용한 결과는 매우 성공적인 것으로 보고되어 왔다. 선형 구조가 갖는 근본적인 한계성으로 인하여, 이 분야에 선형 모델을 활용하는 것은 신경망을 사용하는 경우에 비하여 불리할 것으로 여겨지곤 한다. 하지만 우리는, 선형 모델의 경우 주어진 문제가 갖는 근본적 동특성의 원리를 보다 잘 이해할 수 있도록 해주므로, 적절한 확장 과정을 거치면 선형 임펄스 응답의 개념은 매우 경쟁력 있는 도구가 될 수 있을 것으로 생각한다. 이러한 생각에 따라, 본 논문에서 우리는 복수의 임펄스 응답의 이용을 강우-유출 해석의 문제에 적용하는 방안을 제안한다. 제안된 방법은 복수의 임펄스 응답 모델 사이에 적용되는 단순하고 고정된 스위칭 전략에 기반을 두고 있으며, 각 임펄스 응답은 음이 아닌 성분을 갖도록 하고, 동시에 한개의 봉우리만 갖는 형태를 만족하도록 한다. 우리나라의 특정한 지역의 수문기상학 자료를 대상으로 하여 적용해 본 결과, 제안된 방법은 매우 의미 있는 결과를 제공함을 보여주었다.