• Journal of the Society of Disaster Information
• /
• v.13 no.4
• /
• pp.499-510
• /
• 2017

Based on "The Global Gender Gap Report" by World Economic Forum, this study identified factors of gender gap and analyzed a relationship between income growth and economic structural improvement with 145 countries. Consequently, sex ratio has a positive relationship with GNI growth rate and ICT development index. Female illiteracy has a negative relationship with only GNI growth rate, and female seat of parliament has a positive relationship with only with only GNI growth rate. Female labor participation rate has a positive relationship with inly ICT development index. These results confirmed the importance of future female labor force. With these results, many countries will need to reconsider discrimination against women and establish strategy based on an institution and a policy to prepare the 4th industrial revolution.

• Journal of the Korean Society of Safety
• /
• v.10 no.1
• /
• pp.9-19
• /
• 1995

The recent development of NC lathe and machining renter have enabled automatic or unmanned manufacturing system for the improvement of production rate. And if you want to introduce automatic or unmanned manufacturing system into the cutting process of cage motor rotor, the selections of effective cutting conditions, rational tool grades and tool angles are necessary. As a result, the selection of cutting conditions, tool grades and tool angles are important factors to production rate.

• Journal of the Korean Society of Safety
• /
• v.10 no.2
• /
• pp.46-55
• /
• 1995

The recent development of NC lathe and machining center have enabled automatic or unmanned manufacturing system for the improvement of production rate. And if you want to introduce automatic or unmanned manufacturing system into the cutting process of cage motor rotor, the selections of effective cutting conditions, rational tool grades and tool angles are necessary. As a result, the selection of cutting conditions, tool grades and tool angles are important factors to production rate.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2056-2059
• /
• 2003

The rate control is very important to solve the difficulties arising from bit-rate on transmission through channel and to improve video quality. It is very important to point out that the amount of output bit obtained the encoding process using rate controller brings many problems on the transmission of channels and furthermore output bitstream decoded affects directly on the visual quality of displayed subject. In this paper, the effective rate control algorithm by rate-distortion modeling using MPEG-4 encoder is proposed. The proposed rate control has applied different weighting by VOP prediction type and even in the same VOP prediction type, the predicted reference allocates more bit. Through these bit allocation the minimization of distortion can be achieved preventing propagation of quantization error The amount of saved bitstream obtained by the proposed algorithm in this thesis is allocated to I-VOP using region of interest(ROI) selective enhancement on the next GOV encoding process and this process brought the improvement of visual quality.

• Korean Journal of Animal Reproduction
• /
• v.14 no.1
• /
• pp.73-83
• /
• 1990

These studies were carried out to find the proper conditions for in vitro maturation and fertilization of bovine follicular oocytes and culture methods capable of further developing early embryos. For these objectives, the cleavage rate of oocytes matured and fertilized in vitro was investigated under medium supplemented with hormones and estrous cow serum and season of oocytes collection as well as different cumulus cell stage before insemination. Finally, 2~8 cell embryos were cultured in in vitro and in vitro culture system to investigate developmental capacity into morula. 1. Cleavage rate of oocytes matured in vitro was 27%(20/73) for A(LH＋FSH＋estradil-17$\beta$＋10% FBS), 38%(27/71) for B(LH＋10% ECS) and 27%(15/56) for C(10% ECS), respectively. Supplement B showed more higher rate and 4~8 cell embryos were also obtained much more in this group(67%, 18/27). In vitro maturation rate of follicular oocytes cultured in TCM 199 supplemented withLH and 10% ECS was 88%(75/85). 2. Cleavage rate(15%, 10/65) of oocytes collected in summer was significantly lower than in fall(47%, 42/89). 3. Cleavage rate(15%, 10/65) of oocytes collected in summer was significantly lower than in fall(47%, 42/89). 3. Cleavage rate(15%, 10/65) of oocytes with partially removed cumulus cell before insemination was more higher than that(44%, 27/62) of oocytes with intact cumulus cell. 4. The frequency of development from early cleaved embryos into morula was 6%(4/65), 12%(4/33) for co-culture of cumulus cell monolayer and bovine oviduct epithelial cell monolayer, respectively and 25%(6/25) in ligated rabbit oviduct.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.3
• /
• pp.254-261
• /
• 2005

The over-expression of Bcl-2 has greatly improved the culture period, specific growth rate, and maximum viable cell density of NS0 cells culture under low serum condition. Further analysis of these data suggests that a saturation model of the Monod type can be used to represent the relationships of specific growth rate and initial serum concentration. The ${\mu}_{max}$ and $K_s$ for the Bcl-2 cell line is $0.927day^{-1}\;and\;0.947\%(v/v)$ respectively, which are $21\%$ greate and $7\%$ lower respectively than its control counterpart. Study on the amino acid supplementation revealed that Bcl-2 cell lines possess greater improvement in the specific growth rate and maximum viable cell density compared to the control cell lines. A further increase in the amino acid supplementation has resulted a $17\%$ decrease in specific growth rate and no improvement in maximum viable cell density in the control culture. However, the Bcl-2 cell line exhibited a better growth characteristic in this culture condition compared to that of control cell lines. The higher specific growth rate and maximum viable cell density of the Bcl-2 cell line in medium fortified with serum and MEM EM suggested a more efficient nutrient metabolism compared to that in the control cell line. The low serum and amino acid utilisation rate and the higher cell yield may prove to be important in the development of serum/protein free culture.

• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.73-80
• /
• 2008

ALINEA algorithm, which is one of the best on-ramp metering algorithms, was designed to control the traffic volume from on-ramp in order to maintain the optimal occupancy rate of the detectors installed downstream of the merge area. But, the reliability of occupancy rate estimated from the loop detectors, which are used most commonly in Korea, is relatively lower than other parameters such as speed and volume. Moreover, because occupancy rate depends on the length of loop detectors and site, lots of calibration work is required whenever they are installed in order to estimate the occupancy rate. Therefore, there exists room for improvement of ALINEA algorithm because only occupancy rate having some problems is considered as a control parameter in ALINEA algorithm. Practically it is difficult to measure or perceive the occupancy rate for traffic engineers and drivers. On the other hand, speed can be good alternative which can overcome the defect induced by using occupancy. In this study, occupancy based ALINEA algorithm is converted to speed based ALINEA assuming the linear relationship between density and speed.

• Smart Media Journal
• /
• v.2 no.4
• /
• pp.51-59
• /
• 2013

With increasing transmission speed of backbone networks, it is getting to provide enough available bandwidth. However, the bandwidth is not effectively utilized in volumetric data transfer. This mainly comes from the transmission protocol, TCP, which is used for most applications. TCP is inherently difficult to adapt the available bandwidth because of it's own characteristic of transfer mechanism. UDT is a prominent application level data transfer protocol which is targeting high speed network. In this paper, we propose UDT parallel transfer technologies which is adaptive to network status and then evaluate their performance in two points of view. Firstly, we measure data transfer rate of UDT with rate congestion control methods, and compare them with basic UDT. Secondly, we apply parallel transfer technologies adapted to network status, and measure their performance. Experimental results showed that UDT rate congestion control method outperforms UDT with 106% improvement in RTT 100ms section set with jitter 30ms. In addition, performance of parallel transfer with rate congestion control method showed 107% improvement than that of parallel transfer in RTT 400ms section set with jitter 20ms.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.1
• /
• pp.74-80
• /
• 2009

In the structure of ITO/N,N'-diphenyl-N,N' bis (3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD)/tris (8-hydroxyquinoline)aluminum($Alq_3$)/Al device, we studied the efficiency improvement of organic light-emitting diodes due to variation of deposition rate of hole transport layer (TPD) materials using hole-size of crucible boat. The thickness of TPD and $Alq_3$ was manufactured 40 nm, 60 nm, respectively under a base pressure of $5{\times}10^{-6}$ Torr using a thermal evaporation. The $Alq_3$ used for an electron-transport and emissive layer were evaporated to be at a deposition rate of $2.5\;{\AA}/s$. When the deposition rate of TPD increased from 1.5 to $3.0\;{\AA}/s$, we studied the efficiency improvement of TPD using the hole-size of crucible is 1.0 mm. When the deposition rate of TPD is $2.5\;{\AA}/s$, we found that the average roughness is rather smoother, the luminous efficiency the external quantum efficiency is superior to the others. Compared to the two from the devices made with the deposition rate of TPD is $2.0\;{\AA}/s$ and $3.0\;{\AA}/s$, the external quantum efficiency was improved by four-times and two-times, respectively.

• Journal of Korea Foresty Energy
• /
• v.22 no.1
• /
• pp.37-43
• /
• 2003

The influence factors for char yield in the carbonization process of natural cellulose are the carbonization temperature, the heating rate and the atmosphere in the furnace. In general, it is well known that the improvement of char yield is expected under the conditions of the lower carbonization temperature, the slower heating rate and the presence of inert gas in the furnace. In this study, it has been investigated the effect of the heating rate control with sulfuric acid as a dehydrating agent for the improvement of char yield in the carbonization process of natural cellulose. The cellulose treated with sulfuric acid has shown the weak dependency of heating rate in char yield, whereas the untreated cellulose has shown the strong dependency. These findings clearly suggest that it can be useful to control heating rate with appropriate dehydrating agent in the carbonization process to improve the char yield and shortening the carbonization time.